mould analysis Articles

  • Recycle plastic HDPE Crate Moulds

    According the appliance, usually we classify the plastic crate into following: Industry large plastic crates/box/container moulds Agriculture plastic crates moulds for vegetables,fruits, fish... Plastic ...


    By Focare Mould Co.,Ltd.

  • FIB micro/nano mould machining process for productivity improvement

    FIB has been commonly used as a very powerful tool in the semiconductor industry. It is mainly used for mask repair, device correction, failure analysis, and IC error correction, etc. Currently, FIB is not being applied to the fabrication of the micro and nano-structured mould because of low productivity and sputtering rate has also been required to fabricate the 3D shape. In this paper, we ...


    By Inderscience Publishers

  • Mishandling of Hazardous Materials & Contaminants, Asbestos, Lead, Mould & Fungus, PCB`S

    Untitled Document Everyday in Canada and the United States Hazardous Materials are being removed improperly contaminating the buildings we occupy. The hazardous materials including ...

  • Benefit-cost analysis of Automotive Lightweighting Material projects

    This paper presents benefit-cost analyses for three R&D projects funded by the Automotive Lightweighting Materials Program of the US Department of Energy: design and product optimisation for cast light metals; durability of lightweight composite structures; and rapid tooling for functional prototyping of metal mould processes. Market penetration rates for new technologies from these projects were ...


    By Inderscience Publishers

  • Failure reduction in manufacturing systems through the risk management approach and the development of a reactive maintenance model

    Maintenance and failure costs of production machines increase the overall operating cost of a manufacturing organisation and will reduce the profit margin. Hence, management is interested in minimising the resources allotted to these non-productive activities. This work includes a case study, wherein the failures of a plastic injection moulding machine are examined. The reactive maintenance model ...


    By Inderscience Publishers

  • Energy conservation in aluminium foundries by waste heat recovery from solidifying molten metal

    This paper presents a unique attempt to preheat the raw materials by recovering the waste heat from solidifying molten metal in shape castings of aluminium using sand moulds. Finite element analysis of the problem using ANSYS has also been done, results of which show satisfactory agreement with the experimental results. By using this preheating method, it is proved that around 16% of heat ...


    By Inderscience Publishers

  • Gas assisted chair mold solution

    Gas assisted molding is widely used in manufacturing hollow plastic parts, light weight but strong strength. Especially for chair mold, then how to manufacture good quality gas assisted chair mould? First the material used. Here are three solutions: 1. pure PP 2. PP plus ...


    By Focare Mould Co.,Ltd.

  • Recycle Pallet Molding technology

    *Recycle Pallets Molds Design Analysis.When we received the customer Pallets design, we will gather all the related technical people to analysis the mold design first like demolding draft angle, strength, melt filling, deformation, thickness…and make mold flow analysis. After the design initially confirmed, we will have a technical meeting again to discuss all the plastic pallets molds ...


    By Focare Mould Co.,Ltd.

  • Simulation research on the influence of stress relaxation on plastic IC delamination during scrapped PCB disassembly

    Functional reuse of Integrated Circuits (IC) is effective to recover electronic utilities. Interfacial delamination may occur when the ICs are disassembled from scrapped Printed Circuit Board (PCB) and reduce reusability. In delamination analysis, viscoelasticity of moulding compound is a non-ignorable property as it reduces the stress. It is the purpose of this research to analyse the effect of ...


    By Inderscience Publishers

  • Respiratory symptoms of school children and their home environment in Northern Transdanubia, Hungary

    This cross-sectional study covering all children visiting third grade classes with more than ten children in any elementary school of Hungary used parent-completed questionnaires on the children's present and past health condition, the parents' respiratory health and smoking habits, the home environment and the families' socio-economic status. Around 6670 children from the Northern-Transdanubian ...


    By Inderscience Publishers

  • Bridge Height Limits Transport of Cl02 Storage Tanks

    Located in Northern Ontario on the Trans Canada Highway is a bridge that enables pedestrians and vehicles to cross the Spanish River. The bridge itself holds no place in the annals of Canadian history. It is in fact, quite unremarkable as a typical bridge found in the area. However, the Spanish River Bridge represented a major problem for an engineering project rquired by a local Bleach Pulp ...


    By Fabricated Plastics Limited

  • What's the most popular crate product in the market?

    Which is the most porpular crate product in the market?  There are many porpular shape of crate. We are talking with europe standard fruit crate, vergertable crate, milk crate, bread crate, and thinwall crate, folding crate, stackable crate, bulk crate containers, collapsible crate, europe pool crate, nestable crate ...


    By Focare Mould Co.,Ltd.

  • Solutions For Difficult Ejection

    Solutions For Difficult Ejection According to the above articles reason analysis, mainly we have following solutions for Difficult Ejection: 1)Shooting technique solutions * Avoid excessive melt injection. *Reduce injection pressure and dwell pressure, shorten dwell time. *Reduce injection rate and barrel temperature,optimize dimension of nozzle, runner and ...


    By Focare Mould Co.,Ltd.

  • Improving air quality in the office

    Most people spend the main part of their day indoors – in the home, school or office environment. Focusing specifically on improving air quality in the office and workplace setting, we are looking at the key potential sources of pollution which impact upon air quality and employees’ health. Examples include, outdoor air (particularly relevant if the workplace is next to a busy road), ...


    By Commercial Air Filtration

  • The Retrofit route to large-scale refinery automation - Case Study

    Overview A major petrochemical modernisation programme in Turkey includes a retrofit project that will deliver automated actuation and control for over 900 valves at a refinery’s tank farms. Tupras is Turkey’s largest industrial company and leading refiner, operating four refineries of which the Izmit Refinery, in Kocael Province by the Sea of Marmara, is the largest. First ...


    By Rotork

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you