mould level Articles

  • Gas-assisted injection molding technical control

    The time and pressure of gas injection molding should be strictly controlled. The temperature of the molds should be stritly controlled,so that the cooling of thermoplastic in the cavity can be kept at an appropriate speed,which shall be of avail for the forming of gas cavity.So as a mould maker should be very good at the gas-assisted ...


    By Focare Mould Co.,Ltd.

  • Influence of Soil Structure on the Stress-Strain Behavior of Sand-Bentonite Mixtures

    The influence of soil structure on the behavior of clay-rich mixtures has been examined. Mixtures of sand and bentonite, known as buffer, have been studied to determine their suitability for nuclear fuel waste containment. Triaxial tests have been performed on compacted specimens to determine the strength and constitutive behavior of the buffer. Two techniques were followed in preparing ...


    By ASTM International

  • Carbon dioxide monitoring for food processing

    Application Carbon dioxide monitoring for food processing Equipment G100 CO2 analyser Location Okehampton, UK Customer Kerry Foods Requirement The customer was looking for a CO2 monitor to detect small changes in CO2 levels in the headspace above food products ...


    By Geotech

  • Warden Biomedia Chosen For Launde Abbey Estate Wastewater Treatment Upgrading Project By Marsh Industries case study

    The Launde Abbey estate, which dates back to the 12th century, is established in 450 acres of outstanding rural Leicestershire countryside. Extensive redevelopment on the estate has involved the building of new conference, dining and accommodation facilities, necessitating updating of its sewage treatment facilities. Consideration in the final specification of the product was given to the need ...


    By Warden Biomedia

  • Case study - CO2 monitoring for Kerry Foods

    About the customer Kerry Foods, based in Okehampton, England develops, manufactures and delivers technology based ingredients for the worldwide food and beverage industry The Geotech product G100 CO2 analyser How the company operates The Kerry Foods plant processes food ingredients, such as fruit conserves and confectionery ...


    By Geotech

  • Eliminating VOC From Wood Industry Processes

    ELIMINATING VOC FROM WOOD INDUSTRY PROCESSES As regulations controlling VOC and the environment become increasingly strict at local, national and international level, manufacturers in an increasing range of industries are having to consider appropriate action. The wood industry is no exception. In the manufacture of moulded wooden doors, for example, wood shavings and sawdust are bonded together ...


  • Marsh Industries Selects Warden Biomedia For Uni:Gem 75pe With Polylok 525 Filtration case study

    Overstone Country Park is situated in 160 acres of beautiful Northamptonshire country-side. The park has the River Nene on its borders. Tourists, campers and locals use the extensive natural facilities for fishing, golfing and recreational pursuits. A development of private houses for seventy five people on the private Overstone Park had been threatened with fines and possible prosecution by the ...


    By Warden Biomedia

  • C&L Fabrication Select Warden Biomedia To Install New Wastewater Treatment Plant at Darver Castle case study

    Based in County Louth on the east coast of Ireland, Darver Castle sits in 50 acres of fine parkland, and provides hotel and wedding facilities. The existing wastewater treatment plant at Darver Castle was experiencing challenges in operating at the level of consent limit set by the Environment Protection Agency (EPA). It was clear that the existing treatment plant needed to be replaced with a new ...


    By Warden Biomedia

  • Wpl Ltd Select Biomarble From Warden Biomedia Range For Motorway Services Replacement Effluent Treatment Project At Winchester case study

    A motorway service area (MSA), situated on the M3 at Winchester, serves both sides of the M3 with two filing stations and amenity buildings with restaurants, cafes, toilets and shops plus a 40 bedroom lodge. When opened in 2000, WPL Ltd designed and installed a sewage treatment plant which managed the wastewater from the site. In 2008 the sewage treatment plant was identified as undersized due to ...


    By Warden Biomedia

  • Effect of prenatal exposure to fine particles and postnatal indoor air quality on the occurrence of respiratory symptoms in the first two years of life

    The purpose of this study was to assess an impact of prenatal exposure to fine particles (PM2.5) on the risk of developing respiratory symptoms in early childhood. The study was carried out in a cohort of 465 newborns in Krakow (Poland) who have been followed over the first two years of life. The children exposed to medium level of PM2.5 (>35.3?53.4 µg/m³) had 13% more wheezing days (IRR = 1.13; ...


    By Inderscience Publishers

  • Warden Biomedia Chosen For New Pub/Restaurant Wastewater Treatment Plant at Wakefield case study

    A 'high end' pub/restaurant in Wakefield was experiencing problems with its existing package treatment system which was failing to achieve the effluent quality standards set by the EA and it was reported that a complaint was launched by a local farmer to the Environment Agency for polluting the farmer's pond. The business was desperate to identify a satisfactory low-cost solution to their ...


    By Warden Biomedia

  • Gas Detection Best Practices at Work

    Most work place accidents could be prevented with proper working gas detection equipment. Gas detection is a critical component for safety programs for any environment; it should be given the highest priority and attention to detail to avoid any accidents and unnecessary work place injuries or deaths. Here are some suggestions on how to keep your work environment safe: 1.   Read the gas ...

  • Improved Factory Lighting: NCI Plastics (VIC)

     NCI Plastics, an injection moulding company based in Victoria, has improved factory lighting, resulting in greater productivity, and making workers feel better about their surroundings. An added benefit has been reduced energy costs. Background In 1994, NCI Plastics (Vic) Pty Ltd, an injection moulding company, had a factory at Northcote in Victoria, which employed 20 ...


  • Enso International Ltd Select Biomarble From Warden Biomedia Range For Landfill Leachate Treatment Plant At Nantycaws case study

    The existing landfill leachate treatment plant at Nantycaws was failing to meet the consent levels, and Carmarthenshire County Council was tankering on a daily basis. The Council was therefore looking for a robust treatment solution that would meet the EA consent requirements and reduce the frequency of tankering. Working in collaboration with WEBS, EnSo International Ltd was called in to offer ...


    By Warden Biomedia

  • Flat die wood pellet mill-diesel engine

    Author: Alva R. Email: biopelletmachine@gmail.com Website: www.biopelletmachine.com skype: sophia-ren717 TAGS: Wood pellet mill,wood pellet machine,flat die pellet mill,diesel wood pellet ...


  • Hol’z dir! Sustainable briquette manufacture in the Augustinuswerk Jessen case study

    Since only very recently the Augustinuswerk in Jessen has been producing wood briquettes under its own brand name of “Hol’z dir” in a separate workshop for the handicapped. Only machines from shredder specialist WEIMA are used for production, their own production facilities being only a few kilometres away in Großnaundorf. It is very busy here. Every day 3,000 wood ...


    By WEIMA

  • Greywater recycling system

    Every new home should have a Grey Water Recycling System! This innovative new product allows you to re-use your greywater (previously wasted) and recycle it for use on your gardens or reuse back through the toilets for flushing or in the laundry. Right now this is so important with low water levels, and water prices and council restrictions on the increase. The Ozzi Kleen GTS10 Greywater system's ...

  • Gas-assisted Injection Molding technology

    Through gas-assisted injection molding,products with uneven wall-thickness can be produced.The products produced by gas-assisted injection molding not only can avoid the surface shrink mark, warp and distortion and consume very small amount of materials,but also are easy to be controlled.thus the outer surface of the products are very smooth and no air bubble.It is a technology which use the ...


    By Focare Mould Co.,Ltd.

  • atg UV choosen for sugar solution disinfection

    Client: SOFI   Location: Dunkirk, France Description: atg UV provided UV disinfection for sugar syrup solutions based on their vast experience in the beverage production industry, providing systems for some of the world's leading brands, such as Heineken, Britvic, Thwaites and Coca-Cola. atg UV Technology, market leaders in the ...


    By atg UV Technology

  • Elimination of Alcohol from Lithographic Printing: DS Chemport (Australia)

     DS Chemport has developed a technology to replace the use of isopropyl alcohol in the lithographic printing process. Reported savings from companies that have installed the technology are in the region of $5,000 to $6,000 per printing press, which represents a payback time of between 6 and 12 months. Background DS Chemport (Australia) Pty Ltd was founded in 1987 and is a ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you