mould testing system Articles

  • Data Centre CRAC unit efficiency improvements

    One of the main types of project Munters look at is energy efficiency improvements within the thermal management side. One of the easiest changes that can be made is swapping out the old AC powered motors for EC powered impellors. the reductions in energy is considerable, with some older belt drive unit changes measuring a saving of over 60% this is due to the design of the new impellors and the ...


    By Munters

  • Development of a low cost roll–to–roll nanoimprint lithography system for patterning 8–inch wide flexible substrates

    Recent developments in flexible electronics, solar cells, displays, bio–chips and wearable technology have featured various micro/nanostructures in system designs. However, fabricating these micro/nanostructures on flexible substrates using existing technology such as photolithography, electron beam lithography (EBL) and other lithography techniques are troublesome, time consuming and costly. An ...


    By Inderscience Publishers

  • Compacted lateritic soil treated with blast furnace slag as hydraulic barriers in waste containment systems

    Laboratory testing was conducted to assess the feasibility of using lateritic soil mixed with up to 15% blast furnace slag (BFS) by dry weight of soil as a suitable hydraulic barrier. Tests were carried out on the lateritic soil-slag mixture to ascertain the particle size distribution, index properties and compaction characteristics. The relationship between hydraulic conductivity, unconfined ...


    By Inderscience Publishers

  • Recycle Pallet Molding technology

    *Recycle Pallets Molds Design Analysis.When we received the customer Pallets design, we will gather all the related technical people to analysis the mold design first like demolding draft angle, strength, melt filling, deformation, thickness…and make mold flow analysis. After the design initially confirmed, we will have a technical meeting again to discuss all the plastic pallets molds ...


    By Focare Mould Co.,Ltd.

  • Eliminating VOC From Wood Industry Processes

    ELIMINATING VOC FROM WOOD INDUSTRY PROCESSES As regulations controlling VOC and the environment become increasingly strict at local, national and international level, manufacturers in an increasing range of industries are having to consider appropriate action. The wood industry is no exception. In the manufacture of moulded wooden doors, for example, wood shavings and sawdust are bonded together ...


  • What price health?

    When it comes to health care, the balance between cost and effectiveness is a difficult one to strike. The injection of $1.1 billion into the US system therefore needs to produce sustainable results. A middle-aged man appears in a US emergency room complaining of chest pains. Tests show that an arterial blockage is starving his heart of oxygen. He could have treatment A, or treatment B. Which one ...


    By Nature Publishing Group

  • Enso International Ltd select Biomarble from Warden Biomedia Range for Landfill Leachate reatment Plant at Nantycaws - Case Study

    The existing landfill leachate treatment plant at Nantycaws was failing to meet the consent levels, and Carmarthenshire County Council was tankering on a daily basis. The Council was therefore looking for a robust treatment solution that would meet the EA consent requirements and reduce the frequency of tankering. Working in collaboration with WEBS, EnSo International Ltd was called in to offer ...


    By Warden Biomedia

  • Controlling Bacteria In a Clean Room Environment

    Maintaining the integrity of a cleanroom is a constant battle. The first step to deciding which method, or combination of methods, to employ is to identify the prime sources of contamination. There are three prime sources of contamination through which the integrity of a cleanroom might be breached. First, there is the human element. While many processes might be automated, many situations remain ...


    By GVS Filter Technology

  • Technical brief - membranes for airtight roof designs

    There are compelling energy saving reasons for the trend towards airtight un-ventilated roof designs. An average house loses about 25% of its heat via the loft space and roof. If a roof is made airtight, heat loss reduces to about 15% making a total energy saving of over 5%. According to tests carried out by the Building Research Establishment (BRE), total energy saving could even be as much as ...

  • Vacuum casting technology facilitates record development cycles for automatic juicer manufacturer Zumex - Case Study

    The food and beverage industry is a competitive sector where companies are always looking to reduce costs. The professional juicing machine manufacturer Zumex recently invested in a Renishaw 5/01 PLC vacuum casting machine, which allowed it to speed up its development cycle and cut third party costs. Background The Zumex Group is among the leading designers and ...


    By Renishaw plc

  • A no-brainer for drains

    Pre-fabricated drainage products have saved time and boosted safety on a Welsh road scheme Surface water drainage is not the most visible element of a new road scheme – after all, it’s almost entirely underground. But it is vitally important to any road and it’s one of the first priorities before work starts on the carriageway. At Costain’s £59 ...


    By Kijlstra LTD.

  • The Retrofit route to large-scale refinery automation - Case Study

    Overview A major petrochemical modernisation programme in Turkey includes a retrofit project that will deliver automated actuation and control for over 900 valves at a refinery’s tank farms. Tupras is Turkey’s largest industrial company and leading refiner, operating four refineries of which the Izmit Refinery, in Kocael Province by the Sea of Marmara, is the largest. First ...


    By Rotork

  • Tinytag Data Loggers Aid Conservation Work in HMS Victory

    Monitoring temperature and relative humidity is essential to aid preservation of sensitive items aboard Nelson’s historic flagship HMS Victory. Rugged Tinytag data loggers record environmental conditions to aid in the conservation of historic and reproduction furniture, furnishings and fittings. ...


    By Gemini Data Loggers Ltd

  • Replacement of Two Separator /Absorber Units at an Acid Regeneration Plant

    If professional engineers were asked to define a perfect world, their answer would no doubt include projects that were blessed with a clear and precise description of the requirements, a viable schedule, availability of materials, and a reasonable amount of design freedom. Of course there is no perfect world, so engineers must work with restrictions that vary from difficult to almost impossible. ...


    By Fabricated Plastics Limited

  • Metal additive manufacturing technology used for customised mountain bikes - Case Study

    Metal additive manufacturing technology from Renishaw has enabled Robot Bike Co. to produce a novel design of mountain bike that can be customised to match the size and riding style of the rider. Background The Robot Bike Co. story started in the late 1990s when Ed Haythornwaite met two other bike-mad students, Ben Farmer and Ben Arnold, at Bath University. ...


    By Renishaw plc

  • SOLPOWER rotary tables turn on RESOLUTE™ encoders - Case Study

    Advances in processing technology and the demand for higher quality products have prompted machine tool manufacturers to develop technology that addresses rising raw material costs while responding to the market trend towards higher cutting speeds and demand in areas such as the production of high-accuracy mould tools. SOLPOWER, established in 1995, is a Taiwanese manufacturer of machine ...


    By Renishaw plc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you