mud gas separator Articles

  • Mud desanders and desilters used in solids control system

    Mud desander is the second stage in the operation of drilling solid control equipment, commonly used is 10"and 12" cyclones. Oilfield mud desander is mainly used for the separation of solid particles in drilling fluid to particle size 45-74 microns in diameter. According to the processing capability, the ...


  • Solids Control for Drilling Mud Process System

    Nowadays, more and more drilling contractors recognize solids control’s importance to oil and gas drilling, HDD, CSM/CBM exploration, etc. How does solid control affect well drilling? Please find the following details. Cost Comparison of Two Oil Well Drilling Let’s find the difference of two kinds of oil well drilling with and without solids control system. Final effect or result is ...


  • Electrokinetic Separation

    Introduction The principle of electrokinetic remediation relies upon application of a low-intensity direct current through the soil between ceramic electrodes that are divided into a cathode array and an anode array. This mobilizes charged species, causing ions and water to move toward the electrodes. Metal ions, ammonium ions, and positively charged organic compounds move toward the cathode. ...

  • Separation principle of decanting centrifuge

    KOSUN DC series decanting centrifuge is used in separating suspension of solids phase with particle diameter(d≥2μm) for drilling mud and fluids handling. Ruggedly built for oilfield and industrial services, it is especially effective in environmentally sensitive areas. It delivers high fluid-recovery rates and ...


  • Oil and Gas Development - Onshore Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Common challenges relative to the use of Decanter Centrifuges for barite recovery in the oil & gas industry

    When centrifuges are properly deployed, they can have dramatic effects on drilling performance. In fact, without them, many of the advances made in drilling would not have been considered achievable. Classically, we believe that centrifuges can achieve two common goals: Reduce the content of drilled fines, specifically colloidal solids, and Perform barite recovery in order to reduce ...


    By Elgin Separation Solutions

  • Equipment List for full solids manage & drilling waste

    Solids Handle & drilling waste management are pretty important for drilling contractor. If they manage this division well, they can save lots of money on drilling mud / drilling chemicals, also they can be environmental friendly. There is much equipment needed for solids control & drilling waste ...


  • The use of oilfield shale shaker

    Shale shaker for solids control are devices that remove drill cuttings from the drilling fluid while circulating and drilling. There are many different designs and research into the best design is constantly ongoing since drilling fluids solids control is vital in keeping down costs associated with the drilling ...


  • Muddy waters

    Mark Zwinderman of Surface Active Solutions, looks at the dangers involved in the cleaning and maintenance of mud tanks and associated equipment The oil industry involves many thousands of people working daily in potentially hazardous circumstances with dangerous chemicals and sophisticated engineering equipment. There has been a consistent and determined drive by the industry to reduce the ...

  • How to Deal with Drilling Waste

    At present, environmental protection is a basic state policy in China, and it has been a strategic mission and goal for our country to maintain a sustainable development of society, economy and environment. Along with the continuous improvement of environmental laws and the increasing environmental awareness among people, the departments concerned have successively enacted various environmental ...


  • Centrifuge Technology in Drilling Fluid Recycling

    Drilling fluid additives and the water that contains them are an essential part and expense of successfully completing a horizontal directional drilling (HDD) installation, and the longer the bore and larger the product being installed, the more drilling fluids cost. Therefore, it makes economic sense to recycle drilling fluids by removing cuttings and recirculating the cleaned ...


    By Elgin Separation Solutions

  • The Application of Waste Solids Management Vertical Cuttings Dryers as an integral element of a successful Solids Control System

    In Elgin’s last White Paper, “Common Challenges Relative to the Use of Decanter Centrifuges for Barite Recovery in the Oil & Gas Industry,” a detailed discussion was offered about the complexities involved in achieving effective solids control when deploying a dual-centrifuge “barite ...


    By Elgin Separation Solutions

  • How to treat radioactive NORM sludge with VacuDry

    NORM doesn’t sound like a big thing. But Naturally Occurring Radioactive Material might let the alarm bells ring. Everyone has heard of “radioactive material” and that sounds dangerous. However, most of this material is trapped deep in the ground beneath our feet. From there it reaches the surface, for example via the water cycle. Another possible pathway for NORM to reach the ...


    By econ industries GmbH

  • Principles of HDD Solids Control & Buyers Guide

    Relative to the use of drilling fluids within the oil & gas industry, the use of drilling fluids within the horizontal directional drilling (“HDD”) industry, is new.   As the use of HDD technology did not become mainstream until the 1980’s, it took another decade before drillers started to consider the use of basic drilling fluids.  Even today, ...


    By Elgin Separation Solutions

  • Q&A: A look at Shell Oil and Arctic offshore drilling

    Shell Oil drill vessels are heading to the Arctic. But they will not be permitted to drill into petroleum-bearing rock until a key piece of blowout response equipment, a capping stack, is on site. The capping stack is carried on the icebreaker Fennica, which arrived early Saturday for repairs in Portland, Oregon. Arctic offshore drilling opponents plan to demonstrate while the Fennica is ...


    By Associated Press

  • Cities are finally treating water as a resource, not a nuisance

    From Houston to Melbourne, the surprising ways urban areas are dealing with water woes Memorial Day barbecues and parades were thwarted this year in Houston when a massive storm dumped more than 10 inches of rain in two days, creating a Waterworld of flooded freeways, cars, houses and businesses, leaving several people dead and hundreds in need of rescue. ...


    By Ensia

  • Nitrogen and carbon removal thanks to bacterial processes in a single stadium system ( PRiBioAC 3S ) in wastewaters with high organic and nitrose load

    Biologic procedure for nitrogen and carbon removal in a single step system (PriBioAC 3S) from zootechnical sewage with an high organic and nitrogen level. A solution for nitrate problem Paolo Broglio (paolo.broglio@ecologia-applicata.it) - Ecologia Applicata S.r.l. Services for Ecology Scientific Organization of Environmental ...


  • Vibrating feeders for stockpiling and reclaim

    The expanding applications of vibratory feeders for controlling the flow of bulk materials, and their adaptation for processing requirements, have developed considerable interest in stockpiling and reclaim systems. The general design of these units consists of a material transporting trough, or platform, driven by a vibratory force system. The flexibility and variety of designs is limited only by ...


    By General Kinematics

  • A comparison of two solid phase extraction methods for the analysis of Polyaromatic Hydrocarbons in butter

    Background Polyaromatic hydrocarbons (PAHs) are ubiquitous in the environment, resulting from both natural and manmade sources of combustion. Farm animals, such as cows, can become exposed to them through both consumption of contaminated feed and water, and inhalation of contaminated atmosphere ...


    By Sigma-Aldrich Co., LLC

  • Design and Analysis of a High Pressure Ratio Mixed Flow Compressor Stage

    I. Introduction Smaller frontal area and high thrust to weight ratios of mixed flow compressor stage has resulted in its application for small gas turbine engines in aviation sector [1] . The efficiency and reliability of the compressor depends to a great extent on flow behavior in its flow passage and its interaction between impeller and diffuser. The complex turning of the flow not only ...


    By SoftInWay Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you