mud mixing system Articles

  • Drilling Mud and Mud Circulation System

    As more utility contractors are moving up to larger rigs, they are also moving toward the use of solids removal ( solid control ) systems. These solid control systems are not stand-alone units. They are part of the drilling fluids system along with the drilling fluid and the fluid pump. ...


  • Drilling Mud Circulation System

    As more utility contractors are moving up to larger rigs, they are also moving toward the use of solids removal ( solids control ) systems. These solids control systems are not stand-alone units. They are part of the drilling mud system along with the ...


  • Optimizing drilling efficiencies with a solids control system

    The correct solids control system can improve drilling rig efficiency, reduce costs and minimize the environmental footprint of your operation Although the use of drilling fluids within the HDD / trenchless industry is still relatively new, recent trends suggest that this standard is shifting as solids control is one of the most important phases in the drilling process. This shift is due ...

  • Hazardous waste and not, Baioni-Dicatech system

    The identification, characterization and restoration of contaminated areas now represent a big environmental issue, both at European and national level. In the major industrialized countries the issue of contaminated land has come out in all its gravity in the late seventies when, against a widespread awakening of environmental consciousness, important pollutions events emerged. Consequently, in ...


    By Baioni Crushing Plants Spa

  • Treatment of ship sludge oil using a plasma arc waste Destruction system (PAWDS)

    The Plasma Arc Waste Destruction system (PAWDS) uses a plasma torch to quickly gasify solid  waste on board ships. Developed under the support of the US Navy, this compact one deck system has been in commercial operation on board a cruise ship for more than three years. With the support of Carnival Cruise Lines and the National Research Council of Canada, the PAWDS was recently modified in ...


    By PyroGenesis Canada Inc.

  • Nitrogen and carbon removal thanks to bacterial processes in a single stadium system ( PRiBioAC 3S ) in wastewaters with high organic and nitrose load

    Biologic procedure for nitrogen and carbon removal in a single step system (PriBioAC 3S) from zootechnical sewage with an high organic and nitrogen level. A solution for nitrate problem Paolo Broglio (paolo.broglio@ecologia-applicata.it) - Ecologia Applicata S.r.l. Services for Ecology Scientific Organization of Environmental ...


  • Separation principle of decanting centrifuge

    KOSUN DC series decanting centrifuge is used in separating suspension of solids phase with particle diameter(d≥2μm) for drilling mud and fluids handling. Ruggedly built for oilfield and industrial services, it is especially effective in environmentally sensitive areas. It delivers high fluid-recovery rates and ...


  • Equipment List for full solids manage & drilling waste

    Solids Handle & drilling waste management are pretty important for drilling contractor. If they manage this division well, they can save lots of money on drilling mud / drilling chemicals, also they can be environmental friendly. There is much equipment needed for solids control & drilling waste ...


  • A new approach to drilling waste management – prevention!

    Grangemouth based Surface Active Solutions (SAS) has developed its microemulsion based technology to aid the prevention and management of drilling waste. The many activities surrounding the removal of drilling mud in surface and downhole cleaning applications usually generate significant volumes of oil contaminated drilling waste. The drilling mud is typically removed through the use of solvents ...

  • Principles of Solids Control

    Although the use of drilling fluids within the HDD / trenchless industry is still relatively new, recent trends suggest that this standard is shifting as solids control is one of the most important phases in the drilling process. This shift is due to a growing awareness that drilling fluid maintenance and disposal can become exponential problems as they are both harmful to the environment and ...


    By Elgin Separation Solutions

  • Case Study: Ivey-sol surfactant enhanced soil washing technology overview and project experience

    lvey-sols soil washing is an ex-situ surfactant enhanced remediation (SERS) treatment method which removes hazardous substances from contaminated soils, solids, tank bottom sludge, drill cuttings, drilling muds, etc. The soil washing process (Photol) involves the introduction of the contaminated solids into a treatment chamber which contains an Ivey-sol2 formulation and water, at a specified ...


    By Ivey International Inc.

  • Centrifuge Technology in Drilling Fluid Recycling

    Drilling fluid additives and the water that contains them are an essential part and expense of successfully completing a horizontal directional drilling (HDD) installation, and the longer the bore and larger the product being installed, the more drilling fluids cost. Therefore, it makes economic sense to recycle drilling fluids by removing cuttings and recirculating the cleaned ...


    By Elgin Separation Solutions

  • Barium Sulfate: A Protocol for Determining Higher Site-Specific Barium Cleanup Levels

    Abstract Although different barium compounds are known to exhibit vastly different toxicities, cleanup standards for barium in soil or sediment at environmental corrective action sites are typically based on total barium concentration without regard for the specific barium compounds present. However, the Texas Commission on Environmental Quality (TCEQ) has recently agreed that the insoluble ...


  • Storing Heat Underground

    Underground thermal energy storage (UTES) is a system that uses inter-seasonal heat storage, storing excess heat from the summer for use in winter heating, and the cooling potential from winter for cooling in summer. A cost-effective, low-energy and low-risk proven renewable technology, UTES reduces carbon emissions by up to 60% and is becoming an increasingly popular choice for residential, ...


    By Boode Waterwell Systems

  • Alien fish eradication improves water quality at Century City - case study

    NCC planned and implemented an alien fish eradication programme to solve a looming water quality crisis at one of South Africa’s premier retail, office and residential developments. Century City, first established in 2002, is a large mixed-use development covering 250 hectares of land along the N1 near the centre of Cape Town. It includes the Canal Walk shopping mall, Ratanga Junction ...

  • New advances in planning a bore

    Software helps take out the guesswork Horizontal directional drilling (HDD) is challenging and difficult work fraught with unknown obstacles. While it’s not possible to eliminate every obstacle, bore planning software tools developed by drill manufacturers can help small and large contractors create a bore plan that may help minimize risks. Bore planning software was ...


    By Vermeer

  • Developing Technologies to Detect Hydrogen Sulfide (H2S) Gas

    Abstract Hydrogen sulfi de (H2S) gas can cause nausea, headaches, unconsciousness, and death. Industries struggle to detect this deadly substance before it harms workers or communities. Safety system manufacturers have developed detectors that sense the H2S quickly and accurately. This paper illustrates, in general terms, considerations in effective placement of H2S detectors: ...

  • Best Steam Cleaner for Complete Bacteria Elimination

    The best steam cleaner for commercial applications have three functions: Removing dirt and stains Removing allergens Eliminating germs and pests Dirt Removal Mud spots, sugars, food residue, and stains can be removed more completely by using the best steam cleaner systems, with high temperature and pressure levels. Ideally, the best steam ...


    By Daimer Industries Inc.

  • Case study - One-pass-trencher used to repair Tyler Dam

    Greg DeWind takes pride in his one-pass trenching machine. With a smile on his face, he watches Wednesday as it is used to dig a trench at the Lake Tyler Dam. The 225,000-pound, 3,000-horsepower machine mixes soil, cement and bentonite clay as it cuts a trench that is 2 1/2-foot wide and about 70 feet deep, according to Steve Richards, with ETTL Engineers and Consultants. It burns about 100 ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you