multi-biofuel spectrometer Articles

  • A novel spectrometer design for process and handheld infrared spectral measurements

    Introduction Infrared spectroscopy offers many unique advantages for measurements within an industrial environment. Historically, the technique has been used for a broad range of applications from the composition of gas and liquid mixtures to the analysis of trace components for gas purity analysis. In cases where a well-defined method of analysis is involved, such as the measurement of ...


    By CIC Photonics, Inc.

  • Xenemetrix EX-3600M (EDXRF) spectrometer analysis of the major elements in cement and compliance with ASTM Method C-114

    Energy Dispersive X-ray Fluorescence (EDXRF) can play a vital role in this industry by giving accurate analytical results in a short time.  ASTM C-114 is the test method used for the analysis of hydraulic cements. .  The overview of Xenemetrix EX-3600M (EDXRF) spectrometer analysis of the major elements in cement and compliance with ASTM Method C-114 will be described in this ...


    By Xenemetrix Ltd.

  • Monitoring greenhouse gases from biofuel crops

    Global issues such as climate change and energy security have driven rapid growth in renewable energy production - wind, solar, tidal, geothermal, hydro, biofuels etc. However, logically, each of these methods should deliver a net benefit in terms of greenhouse gas (GHG) reduction, so researchers in the United States have employed portable FTIR analysers to study the GHG emissions of biomass ...


    By Gasmet Technologies Oy

  • Implementation of an automatic and miniature on-line multi-parameter water quality monitoring system and experimental determination of chemical oxygen demand and ammonia-nitrogen

    An automatic, miniature and multi-parameter on-line water quality monitoring system based on a micro-spectrometer is designed and implemented. The system is integrated with the flow-batch analysis and spectrophotometric detection method. The effectiveness of the system is tested by measuring chemical oxygen demand (COD) and ammonia-nitrogen in water. The results show that the modified system ...


    By IWA Publishing

  • Content Analysis of Toxic Elements in Soil by Simultaneous ICP

    Contaminated soil not only leads to contamination of untreated drinking water through permeation into river water and rainwater, it adversely affects health when the soil itself is directly ingested as a child puts the ground into a stoma into a play etc. Therefore, assessment of soil toxicity using a defined method is required. I In Japan, the Soil ...

  • Hyphenated techniques as modern detection systems in ion chromatography

    Ion chromatography (IC) with conductivity detection has been successfully used to analyze low-molecular organic compounds such as amines and organic acids, as well as anionic and cationic substances. However, due to current toxicity concerns and the consequently lowered maximum contaminant levels (MCL), analyses in complex matrices require improved sensitivity and selectivity. The coupling of IC ...


    By Metrohm AG

  • Get Comparable ASTM/EN Data for Biodiesel Blend Measurements While Saving Time and Money using Portable IR Analyzers

    Both EN 14078 and ASTM D7371 methods for measuring the percent biodiesel in diesel fuel use infrared analysis as the analytical method and are based around using an FTIR spectrometer which has the capability to do a multitude of analyses besides the biodiesel in diesel measurement. This is great for a laboratory where various biofuels measurements are required. However, if the only measurement ...


    By Spectro Scientific

  • Fast, Sensitive, and Cost-effective ICPE Spectrometry Analysis of Trace Metals in Water by EPA Method 200.7

    Introduction The Shimadzu ICPE-9820 multi-type ICP atomic emission spectrometer is the ideal instrument for running EPA Method 200.7. The ICPE-9820 permits simultaneous analysis of all elements, at all wavelengths, allowing high-throughput analysis with little need for dilution. The large 1-inch CCD detector with over 1 million pixels measures 110,000 wavelengths. Overflow channels ...

  • Detection of moisture in ammonia gas

    Problem Statement As technologies advance, so does the request for ultra high purity ammonia. Ultra high purity (UHP) ammonia is used in the semiconductor industries, production of flat panel displays, and a number of other applications. Due to this rising interest in UHP ammonia, manufacturers are having to battle ammonia’s most prominent and damaging impurity--moisture. For ...


    By CIC Photonics, Inc.

  • Fertilizer Analysis Using Inductively Coupled Plasma Atomic Emission Spectrometry

    Wastewater disposal sludge, composed of a wide variety of substances, is effectively recycled as fertilizer. However, such recycling requires prior quality confirmation testing of the main constituents as well as the harmful constituents to ensure the safety of the resultant sludge fertilizer. In the case of fertilizer classified as "ordinary fertilizer," the Japan's Fertilizer Control Law ...

  • Biodiesel Analysis with Mid Infrared - From Feedstock to Fuel

    Introduction The biofuels industry is growing rapidly and so is the need for analysis to ensure quality product. The parameters for quality biodiesel require different types of instruments and measurement systems, such as gas chromatographs (GC), titrators, centrifuges, infrared spectrometers... Although claims are out there for the analyzer that will do it all, unfortunately there is no one ...


    By Spectro Scientific

  • Sequential Extraction Procedure

    Sequential extraction is an analytical process that chemically leaches metals out of soil, sediment and sludge samples. The purpose of sequential “selective” extraction is to mimic the release of the selective metals into solution under various environmental conditions. One commonly used sequential extraction procedure is designed to partition different trace metals based on their ...


  • Support to Aviation Control Service (SACS): an online service for near-real-time satellite monitoring of volcanic plumes

    Volcanic eruptions emit plumes of ash and gases into the atmosphere, potentially at very high altitudes. Ash-rich plumes are hazardous for airplanes as ash is very abrasive and easily melts inside their engines. With more than 50 active volcanoes per year and the ever-increasing number of commercial flights, the safety of airplanes is a real concern. Satellite measurements are ideal for ...

  • SPGAS: Specialty gas analysis software

    About SPGAS SPGAS is a user-friendly, turnkey FTIR software package designed specifically for the analysis of gaseous constituents. While providing all of the control features of a standard FTIR software package for Bomem spectrometers, SPGAS also provides the ability for 24/7/365 operation of the IRGAS analysis package. SPGAS is designed to save spectral files from each day of ...


    By CIC Photonics, Inc.

  • New technologies for measuring the humidity of biomass

    Methods applicable to a great variety of solid biofuels In recent years, systems have sprung up which use near infrared X-ray (NIR) spectroscopy, radio frequency (RF) and microwave spectroscopy as alternatives to the traditional method of measuring humidity by weight difference in the fuel burner. What these methods have in common is that they can be used for a great variety of solid biofuels, ...

  • The Gasmet story from an academic idea to a global business

    In this article, Dr Petri Jaakkola, founder and Chairman of Gasmet Technologies Oy explains how an idea shared by a group of researchers at the University of Oulu in Finland, during the early 1970s, developed into one of the world’s leading gas monitoring instrumentation manufacturers. Early history – technology development At first, the Finnish researchers understood ...


    By Gasmet Technologies Oy

  • Environics - Reducing calibration gas cost by up to 60%

    EPA's appendix 'M' 40 CFR 51 reduces calibration gas cost by 60%By: Terrence P. Dunn, President of EnvironicsOn May 30, 1995, the EPA published the final version of Method 205 for inclusion in Appendix M of 40 CFR Part 51 entitled, 'Verification of Gas Dilution Systems for Field Instrument Calibrations.' Continuous emissions monitoring systems (CEMS) require ...


    By Environics, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you