multi-element analysis Articles

  • The Basics of Slope Stability Analysis for Geosynthetics

    Slope stability analysis is vital to preventing slope failures in a variety of engineering applications including landfill design, roads, dams and embankments, to name a few. Proper analysis anticipates both natural and manmade slopes and failure of foundations and retaining walls. This blog covers the necessity of slope stability analysis, how to conduct the analysis and the role of ...


    By Agru America, Inc.

  • Spectro Scientific`s Third Edition Of The Oil Analysis Handbook

    It has been over two years since the publication of the first edition of Spectro Scientific’s In-Service Oil Analysis Handbook. Our goal was to compile a comprehensive reference book of common in-service oil analysis techniques to help readers understand and choose the right technique and instrumentation for their needs. In-service oil analysis for condition based maintenance covers a wide ...


    By Spectro Scientific

  • Elemental analysis

    This article describes the benefits of the MiniPal QC for characterizing coal at-line. The MiniPal QC is a benchtop energy dispersive X-ray fluorescence system designed to fulfill the needs for rapid and reliable elemental analysis at line. ...


    By PANalytical

  • Ferrography Made Easy With The FerroCheck 2000

    The measurement and trending of abnormal ferrous wear debris in machinery lubrication oils is arguably the most significant indicator of machinery health and a key predictor of catastrophic machinery failure. There are several methods available to measure the ferrous content of lubrication oil. ...


    By Spectro Scientific

  • Fuzzy finite element analysis of multi–group neutron diffusion equation with imprecise parameters

    In this paper, multi–group neutron diffusion equation with imprecise parameters has been solved using proposed fuzzy finite element method. The proposed method is demonstrated by investigating the neutron fluxes viz. thermal and fast group fluxes of a benchmark problem ANL–BSS–6–A2. Various parameters such as thermal conductivity, diffusion, group fission and neutron interaction constants are ...


    By Inderscience Publishers

  • Faults detection by finite element analysis of a multi cracked beam using vibration signatures

    In this paper, analysis for fault identification in a cracked beam has been carried out. Theoretical, finite element and experimental analyses for identification of the crack depths and their positions in a beam containing multiple transverse cracks are carried out. It has been established that a crack in a beam has an important effect on its dynamic behaviour. The strain energy density function ...


    By Inderscience Publishers

  • Caltech working to solve the world`s energy problems with the help of inVia

    Fossil fuels are the world's main fuel source for transportation, heating and generating electricity. As a by-product, high levels of CO2 are released into the atmosphere. With the drive for sustainable energy production, a method that generates easily-stored fuel from sunlight—and absorbs CO2—is a very attractive proposition. The California Institute of Technology ...


    By Renishaw plc

  • Elemental Analysis - Automation Without Limits

    Fully automated carbon, sulfur, chlorine, and nitrogen analysis in liquid and solid samples is possible! Thanks to the multi-matrix sampler you have the security of being able to meet the most varied analytical challenges in next to no time with one single system - the multi EA® 5000. Its intelligent construction facilitates the highest sample throughput ever in organic elemental analysis. ...


    By Analytik Jena AG

  • Identification of weak buses and elements participation in voltage instability of large multi bus power system

    In heavily loaded systems, voltage stability limit is usually dominant and voltage instability is usually observed following large disturbance. This is typically the case in the deregulated environment as the transmission systems are operating under more stressed condition due to increased transaction level associated with open access. In this paper simple voltage stability analysis is carried ...


    By Inderscience Publishers

  • EDXRF Analysis of Sulfur and Other Elements in Oil

    The concentrations of sulfur substances in fuel oil, which greatly contribute to air pollution and acid rain, are regulated by law in many countries, and these regulations are becoming stricter with the growing concern about their impact on the environment and the consequences for society. Here, using the easy-to-operate EDX-720 energy dispersive X-ray fluorescence spectrometer, we determined the ...

  • ICP Analysis of Multiple Elements in Drinking Water

    The amount of water typically consumed by an adult is said to be about two liters per day, and nearly all of this is tap water or mineral water, generally referred to as "drinking water." Conducting safety inspections are the responsibility of each country according to their respective regulations. Typically, there are many target elements included in the test, such as sodium (Na), calcium ...

  • Content Analysis of Toxic Elements in Soil by Simultaneous ICP

    Contaminated soil not only leads to contamination of untreated drinking water through permeation into river water and rainwater, it adversely affects health when the soil itself is directly ingested as a child puts the ground into a stoma into a play etc. Therefore, assessment of soil toxicity using a defined method is required. I In Japan, the Soil ...

  • Mercury Analysis

    Characteristics of Mercury What is Mercury? Mercury is a naturally occurring silver-colored metallic element noted for its occurrence as a liquid at room temperature and toxic to living organisms. This silvery, opaque liquid metal is very dense, yet has a high surface tension that causes it to form tiny perfect spheres in the pores of the rocks it is found in. It is ...


    By HORIBA Europe GmbH

  • Determination of Trace Elements in Lead for Battery Applications using Atomic Absorption Analysis

    Sample and Standard Preparation procedures for Trace Elements in Lead [1] Preparation of Lead (Pb) Samples: Drill Pb metal to make small pieces. Weigh 2.0 grams of these pieces on a balance. Place the sample in a 400ml Pyrex breaker and add 10ml H2O, 2.5 grams of tartaric acid and 7ml HNO3. Warm on a hot-plate until the sample dissolves. Dilute to 100ml in a volumetric flask with water (H2O). ...


    By Buck Scientific Inc

  • Optimal finite element modelling for modal analysis of liquid storage circular tanks

    Model analysis of liquid storage vertical tanks is a complex task due to fluid–structure–soil interaction. Analysis of tanks subjected to earthquake excitations using finite element modelling (FEM) has become a preferred technique. The FEM is validated by comparing its results with experimental and theoretical results in the literature. However, most finite element studies in literature do not ...


    By Inderscience Publishers

  • Theoretical analysis and finite element modelling of composite ferrocement–concrete beams

    Composite ferrocement–concrete beams have been introduced in the literature as a viable alternative for the conventional reinforced concrete beams. This paper presents a proposed theoretical and a three–dimensional non–linear finite element models for simulating and analysis of composite ferrocement–concrete system. The theoretical and the finite element models were used to analyse ten composite ...


    By Inderscience Publishers

  • Elemental composition analysis in lichens transplanted to the western region of Catamarca, Argentina

    Thalli of the lichen Parmotrema austrosinense were collected in their natural non-polluted habitat and transplanted to 18 monitoring sites within an area of the western region of Catamarca province (Argentina) where fruticose lichens are absent. This region is going through a reactivation phase, owing to large-scale mining development and agricultural expansion. The concentrations of 25 elements ...


    By Inderscience Publishers

  • Firmness evaluation of melon using its vibration characteristic and finite element analysis

    Analysis of the vibration responses of a fruit has been suggested as a non-destructive measure of its elastic properties (firmness). In this study, 'Huang gua' melons were excited using three types of balls (wooden, steel and rubber) and the vibration was detected by an accelerometer. The modulus of elasticity of the inner, middle and outer portions of melon flesh were determined using flat plate ...


    By Inderscience Publishers

  • Group-IV and V ion implantation into nanomaterials and elemental analysis on the nanometre scale

    Novel group-IV and V nanomaterials are produced by newly set-up low energy ion implantation and electron beam annealing (EBA) systems at GNS Science. This review paper introduces the community to GNS's new nanotechnology systems. Three representative examples on the use of the systems for nanotechnology research and development are given for (a) subsurface lead ion implantation into Si resulting ...


    By Inderscience Publishers

  • Finite element analysis of buried continuous pipeline subjected to fault motion

    Pipeline generally extends over long distances traversing through wide variety of different soils, geological conditions and regions with different seismicity. Most analytical models developed in the past for pipeline fault crossing are of limited usage as models developed were useful only for strike slip fault. Incorporating the large geometric changes in analytical study is a tricky task; ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you