multi-fuel analyzer Articles

  • How to analyze H2S, All Mercaptans, THT and Total Sulfur for Monitoring Natural Gas or Gaseous Fuels in Metering Stations

    Chromatotec has been pleased to participate to the last issue of Petro Industry News with an article on “How to analyze H2S, All Mercaptans, THT and Total Sulfur for Monitoring Natural Gas or Gaseous ...


    By Chromatotec Group

  • Wind Energy Production Estimates: Moving Beyond Time Averages

    No need to be a statistician to see that averages are often useful to compare different things. And yet, they often fall short as a true measure of performance. For instance, we use averages to compare the current weather against the climate normals or to get a sense of how our favorite sport team or player is doing. Team (player) statistics are a concise way of combining the scores from many ...


    By AWS Truepower, LLC

  • Forklift Emissions Analyzers

    Forklifts are commonly used in warehouses of various size and capacity for the movement and shipping of goods; however, the unoptimized engines can produce excess quantities of silent and deadly CO gas that can risk the health and safety of the workers. When forklifts are brought in for service usually the CO gas isn't measured. If the CO gas isn't measured and the engine properly optimized then ...

  • Sulfur Compounds Analyzer MEXA-1170SX

    The MEXA-1170SX is a continuous gas analyzer for sulfur compounds existing in engine emissions. It can measure SO2 concentration and the amount of total reduced sulfur compounds (TRS), such as H2S, separately. It can also measure the total sulfur compounds (TS) that contains both gaseous compounds and liquid compounds in PM, such as SO3. By utilizing ultra-violet fluorescence (UVF) method and ...


    By HORIBA Europe GmbH

  • Analyzing for Trace CO and CO2 using a Total Hydrocarbon Analyzer

    Untitled Document The purity of Specialty Gases is determined by the measurement of various contaminants including Total Hydrocarbons. Low level measurements of carbon ...


    By MOCON, Inc. - Baseline

  • Simplified biofuels measurements with portable mid infrared analyzers

    Product quality begins at the production facility and extends to consumer filling station. Some process control or quality verification analyses can be done with quick and simple verification tests while others require more complete tests according to the ASTM or EN approved methods. Many crucial measurements can be performed by mid-infrared (IR) analysis. These measurements include free fatty ...


    By Spectro Scientific

  • State of Oregon acquires CEREX micro hound multi-gas analyzers for hazmat first responders

    Abstract: "During the overhaul phase of a structure fire, firefighters commonly doff their self contained breathing apparatus SCBA protection for easier working conditions and traditionally rely upon carbon monoxide (CO) detection as the determinate for this action. A CO level of below 35 ppm has traditionally been the acceptable limit for firefighters to wear this lesser level of ...

  • A multi-parameter analyzer helps a Kentucky treatment plant step up to the plate and meet a new phosphorus limit in its permit

    In 2001, the Lexington Fayette Urban County Government West Hickman Creek Wastewater Treatment Plant in Nicholasville, Ky., was starting Phase II of its third upgrade since 1972, when the state imposed a phosphorus limit. Total phosphorus hovered around 6 mg/l, but the permit required 1 mg/l monthly average and 2 mg/l daily maximum from May through October. Engineers from Tetra-Tech, the ...

  • AMETEK THERMOX Introduces the WDG-V Combustion Analyzer

    Abstract AMETEK THERMOX Introduces the 5th Generation THERMOX Combustion Gas Analyzer in a CONTROL Magazine Exclusive. WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as well as CO and methane levels.  Information from the Gas Analyzer allows operators to obtain the highest ...

  • Calibration stability of the sievers 900 series TOC analyzers

    Objective One of the advantages of the membrane conductivity measurement system employed in the Sievers 900 Series TOC Analyzers, compared to other TOC analyzers, is the excellent stability of the calibration. To illustrate this, a series of tests were conducted on three 900 Series analyzers over the course of a 14-month period and the results are  summarized in this report . The 900 ...


    By GE Analytical Instruments

  • New sludge blanket level analyzer from Entech

    Entech Design, Inc.’s BinMinder 9300 features a multi-channel analyzer designed for superior sludge level detection in the full range of water and wastewater applications. The system consists of an analyzer that is capable of operating from one to four sensors or transducers for reliable and cost-effective measurement. Measurements are made by transmitting a high frequency sound wave and ...


    By Entech Design, Inc.

  • By the numbers: Analyzing the U.S. National Climate Assessment

    The draft U.S. National Climate Assessment was released last week, confirming that the climate is changing, that it is primarily due to human activities, and that the United States is already being adversely impacted. These top-line messages ...

  • Cerex introduces the new AirSentry FTIR Open Path Analyzer

    Cerex Monitoring Solutions is pleased to announce the release of the third generation model AirSentry FTIR multi-gas open path FTIR analyzer. The decision was made to fully redesign the analyzer to take full advantage of advances in hardware and software technology. The third generation design represents a full reconfiguration of the instrument. Goals were to reduce initial and operating costs ...

  • 5th-Generation Thermox WDG Flue Gas Combustion Analyzer

    "For more than 40 years, we have been a leader in combustion gas analysis," says Mike Fuller, divison VP of sales and marketing and business development for Ametek Process Instruments, "and we believe the WDG-V is the combustion analyzer of the future." WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as ...

  • Application notes: The Sievers InnovOx TOC analyzer: boiler water monitoring

    Background A boiler system is a semi-closed loop system in which water is heated and converted into steam to power a generator. The steam is then allowed to form a condensate and the process is repeated. Boiler water chemistry directly impacts boiler efficiency and fuel use. Improper water treatment allows scale formation and corrosion. Boiler scale and deposits form when impurities ...


    By GE Analytical Instruments

  • FTIR gas analyzers support management of fire at UK waste facility

    The capability to convene a multi-agency Air Quality Cell (AQC) was established in England in 2009 following the Buncefield Oil Storage Depot incident. A review of this event identified the need to rapidly co-ordinate the acquisition, analysis and interpretation of air quality data in major incidents.  Arrangements have been made in England to bring together experts from the Environment ...


    By Gasmet Technologies Oy

  • On the suitability of Portable X-Ray Fluorescence Analyzers for rapid screening of toxic

    Abstract X-Ray Fluorescence spectrometry (XRF) has been routinely used for alloy testing, determination of Pb in paint, and determination of Cd in plastic. However, its use to screen for toxic elements in food and medicinal products has been surprisingly limited to date. While XRF is less sensitive than atomic spectrometry methods such as ICP-AES and ICP-MS, it offers a number of significant ...


    By Northern ANI Solutions Ltd.

  • Waste Fuel Case History

    The Customer The company engages in the design, manufacture, and sale of machinery for decomposing petroleum-based materials. The company uses microwave technology for recovering hydrocarbons and fossil fuels from sources, such as tires, oil shale, capped wells, coal, automotive shredded residue, municipal solid waste, shale deposits, and waste oil streams. The ...

  • Methods of oil/fuel analysis

    PC GlobeCore can propose you to make a reclaiming test of yours example of fuel (oil) to verify the possibility of clean it. If the oil is contaminated and not suitable for use, filtration can be recommended. Or, you can also make this test by yourself using our laboratory/test-bench transformer oil vacuum regeneration system UVR. The regenerated samples exceeded yours expectations. Average ...


    By GlobeCore GmbH

  • Get Comparable ASTM/EN Data for Biodiesel Blend Measurements While Saving Time and Money using Portable IR Analyzers

    Both EN 14078 and ASTM D7371 methods for measuring the percent biodiesel in diesel fuel use infrared analysis as the analytical method and are based around using an FTIR spectrometer which has the capability to do a multitude of analyses besides the biodiesel in diesel measurement. This is great for a laboratory where various biofuels measurements are required. However, if the only measurement ...


    By Spectro Scientific

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you