multi-level water sampling Articles

  • Water Treatment Optimization - Case Study

    Drinking water treatment in North America has stringent requirements for effluent water quality, with a great amount of attention being drawn to the presence of hazardous disinfection by-products (DBPs) persisting through water distribution systems. The operation of water treatment plants involves addition of various mixing agents to help with coagulation and settling of organics in the raw water ...


    By MANTECH

  • Measuring CO2 to Optimise the Bulk Storage of Food

    Meeting the food requirements of a growing global population is becoming increasingly difficult. Despite the need for additional food, it is estimated that 50-60% of grain is lost after harvesting, at a cost of about $1 trillion per year.1 One of the major reasons for lost grain is spoilage due to mould or insect infestation during storage.2 To provide a ...


    By Edinburgh Instruments Ltd

  • Quality assurance and Quality control technical note

    Introduction For almost 50 years HYDROLAB products have provided dependable sensor technology in a multiple parameter instrument for montioring essential indicators required for assessing water quality in natural waters. Useable data are the lifeblood of any environmental water quality monitoring program and variation in measurement processes impairs the quality of the data that water ...


    By The OTT Hydromet Group

  • A quick guide to oil analysis for engine test applications

    Reliability testing is a very important component of new engine development. Engineers need to fully understand and chart the engine lifetime performance under a variety of conditions before mass production may be considered. Many important performance data parameters are collected in real time through the many different types of sensors that are connected to the engine in the test cell and oil ...


    By Spectro Scientific

  • Ground Water Sampling - A Workshop Summary

    Monitoring purposes have evolved in the past decade reflecting an increasing emphasis on assessment and remedial action performance over detection monitoring. The recognition of many potential contamination sources as well as the regulatory inclusion of a large number of sites in need of investigation have spurred this evolution in practice. New more efficient methods and tools for ...


    By QED Environmental Systems

  • Sample Coolers

    Sample Coolers, originally developed in association with the CEGB, have been the industry standard for many years in nearly all Uk Power Stations and with UK Plant builders for both UK and overseas projects. The performance and reliability remain unsurpassed. Ever concious of changing markets, Lowe Engineering have the largest selection of sample coolers for mant varying applications, whilst ...


    By Lowe Engineering Limited

  • A multi-method comparison of Atchafalaya basin surface water organic matter samples

    Received for publication January 29, 2008. Surface water organic matter (OM) was isolated from two distinct sites within the Atchafalaya Basin using a combination of XAD-8 and XAD-4 non-ionic macroporous resins and characterized by a suite of analytical methods, including elemental analysis, 13C cross polarization magic angle spinning nuclear magnetic resonance, attenuated total reflectance ...

  • Low-Flow (Minimal Drawdown) Ground-Water Sampling Procedures

    Untitled Document Background The Regional Superfund Ground Water Forum is a group of ground-water ...


    By Solinst Canada Ltd.

  • Nitrate Analysis of Water Samples Using a Benchtop UV-Vis Spectrophotometer

    Nitrogen is naturally found in groundwater and surface water in the form of nitrate, nitrite, or ammonium. The EPA has established a maximum contaminant level of nitrate-nitrogen in potable water of 10ppm. This application presents results of UV-Vis analysis of nitrate concentrations in drinking water, ground water, and industrial wastewater, showing that the manual colorimetric method is ...

  • Laboratory Management - Integrated Sampling the Key to Safe Water Supply

    Leading water suppliers use Laboratory Information Management Systems (LIMS) to integrate the sample collection and analysis process, helping to maximize the efficiency of these programs. Drinking water suppliers around the world face unique challenges: They must deliver the most essential ingredient for life on a grand scale, while also navigating complex issues surrounding public safety, ...

  • Sampling of Saturated and Unsaturated Sands by Freezing

    A 600-mm-long, 100-mm-wide, and 20-mm-thick steel plate containing a wavey groove carrying chilled ethanol at -40°C was used successfully to obtain undisturbed frozen samples of saturated clean sand. The freezing probe was also used in an unsaturated sand dune to obtain samples at a depth of 3.0 m. For sands above the groundwater level, an imbibition test is, however, required prior to freezing ...


    By ASTM International

  • Conductivity Measurement in high purity water samples below 10 microsiems/cm

    High Purity Water Resistivity/ Conductivity Measurement Ultra-Pure Water without any chemical impurities will still have a conductivity because of the presence of H* and OH" ions due to the self-ionization of water. Ultra-pure water has a conductivity of 0.055 HSiemens'cm or a resistivity of 18.18 mQ-cm at 25 °C. In order to know the conductivity or resistivity of ultra-pure water it is ...


    By IC Controls Ltd.

  • Sensitive quantification of trace zinc in water samples by adsorptive stripping voltammetry

    A simple and sensitive adsorptive stripping voltammetry method was developed for determination of Zn using N-nitrozo-N-phenylhydroxylamine (cupferron) as a selective complexing agent. This complex absorbed on the hanging mercury drop electrode and created a sensitive peak current. The peak current and concentration of zinc accorded with a linear relationship in the range of 0.85–320 ng ...


    By IWA Publishing

  • Sample System Best Practices for Water and Hydrocarbon DP Applications

    Abstract Sampling techniques for BTU and moisture measurements are well understood but applications beyond the routine requires additional attention to detail. Two such applications are the subject of this paper. The first is the measurement of low level moisture (1 – 1,000 ppbv) for cryogenic processes. Measuring moisture below 1 ppm is an entirely different world from the traditional ...

  • Sample extraction kit user’s guide

    Intended Use This extraction kit is for use with the appropriate immunoassay test kit. Each Sample Extraction kit contains the materials necessary to process twelve (12) soil or wipe samples. Test Principles The reagents contained in the Sample Extraction kit have been optimized for fast, efficient removal of compounds from soil or surfaces and convenient ...


  • Setting the standards for headspace sampling by PID

    The responsiveness of PIDs to virtually all VOCs has seen them become the accepted tool for initial site entry assessment, ensuring optimal detection of unknown and often toxic or hazardous chemicals found at hazardous waste sites and chemical emergencies. The speed and accuracy of modern PID equipment means that many worker and community safety concerns during initial and ongoing operations can ...


    By Ion Science

  • Swabbing Water Lines – A Better Level of Water Awareness

    We know that biofilm is a tricky thing. It grows quickly, harbors bacteria, protects that bacteria from cleaning agents, and then releases those bacteria back into the water, potentially causing severe health issues. We clean and sanitize regularly to try to keep it controlled, but how can we know how much bacteria are actually inside the pipes? Doing a drip sample gives us just a vague idea. ...


    By Valco Companies, Inc

  • Issues concerning spectral analysis of water samples for monitoring and treatment of public water resources

    Experimental measurements conducted in the laboratory, involving hyperspectral analysis of water samples taken from public water resources, have motivated a re-evaluation of issues concerning the potential application of this type of analysis for water monitoring, treatment and evaluation prior to filtration. One issue concerns hyperspectral monitoring of contaminants with respect to types and ...


    By IWA Publishing

  • Case study - Multilevel sampling and monitoring, Maryland, USA

    Challenges Volatile Organic Compounds contaminated the groundwater posing a risk to nearby private water supply wells. The traditional approach of drilling and sampling multiple boreholes did not provide adequate data to characterize groundwater flow and contaminant migration in the complex fractured bedrock. Solution Westbay System* was installed ...


  • Use of Eight Well Purging and Sampling Record

    This article describes a groundwater well purging and sampling form that can be downloaded at our website. A click on the articles button will take you to a list of Monitoring Tips and Procedures articles, one of which is the sampling form. The form can be used to record  indicator parameters pH, conductivity, temperature, etc., taken during ...


    By RotaPump, Inc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you