Pulsar Process Measurement have been involved in design, manufacture and supply of non-contacting Ultrasonic Level and Pump Control systems for the Internal Drainage Board industry for many years. Three typical examples of the application of this equipment are installed at North Level IDB Cross Guns Pumping Station. The original Cross Guns Pumping Station was built in 1938 to house three 760mm ...
Compressed air is used in many manufacturing processes for many different reasons, from the actuation and control of pneumatic valves and cylinders to the operation of process machinery and tooling. It can also be used as a transport medium for bulk materials or as a purge gas. For all its uses it is nonetheless expensive. This is why, through detailed monitoring, a business can enjoy the ...
Compressed air is used in many manufacturing processes for many different reasons, from the actuation and control of pneumatic valves and cylinders to the operation of process machinery and tooling. It can also be used as a transport medium for bulk materials or as a purge gas. For all its uses it is nonetheless expensive. This is why, through detailed monitoring, a business can enjoy the ...
The vast majority of chain and flight collectors in operation throughout the world do not have any form of monitoring system installed to protect against operational failure. Traditional safety devices consist of a shear pin sprocket device, with a limit switch, designed to protect the drive system if a load or torque exceeds the working load of the ...
In greenhouse applications, the accurate measurement of a number of environmental parameters such as carbon dioxide concentration, temperature, light intensity, water, humidity, pH and nutrient levels using sophisticated sensors is used to create a controlled environment for optimising plant growth rates while minimising energy usage. Carbon dioxide concentration is also one of the best ...
' In order to determine the effectiveness of actions to improve environmental quality it is necessary to be able to measure relevant environmental parameters at a level of detail which is accurate enough to distinguish the anticipated changes. However, the establishment and maintenance of monitoring systems is time-consuming and expensive and therefore the scale of such systems needs to be kept ...
Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...
All six ecosystem initiatives evolved from many years of federal, provincial, First Nation, local government and community attention to the stresses on sensitive habitats and species, air and water quality, and the consequent threats to community livability. This paper assesses water quality aspect for the ecosystem initiatives and employs newly developed Canadian Council of Ministers of the ...
THis article shows the use of the Cogent PDV6000plus as a portable analyser used to monitor metal concentration in river and lake water which is polluted by acid mine water from abandoned mine ...
Phragmites australis for sludge dewatering and stabilization processes have been widely proved. The presence of reeds, indeed, efficiently allows solids dewatering and organic matter stabilization in order to obtain a stabilised product that can be suitable for land application, even if its environmental impact has to be considered. The actual revision of the European Union's Working Document on ...
After our recent article about inspecting your hull paint to reduce bio-fouling and acting as an anti-corrosion method, we wanted to delve deeper into one of the biggest problems shipowners and operators face: corrosion. ...
A look at a range of devices for watching TDS. One major question a potential customer may ask before they purchase a point-of-use/point-of-entry (POU/POE) water treatment system is, “How often will I need to change the filter?” Maintenance and service are directly related to two of their major concerns: money and health. People don’t want to spend money unnecessarily, yet they ...
With the development of mining, smelting and other industrial activities, heavy metals are increasingly being found in freshwater sources which can pose severe threats to human and environmental health. Pollution by heavy metals (such as Cd, Pb, etc.) not only affects the productivity of crops, but also the quality of the atmosphere as well as water bodies and threatens the health and life of ...
The paradigm shift in recent years towards sustainable and coherent water resources management on a river basin scale has changed the subject of investigations to a multi-scale problem representing a great challenge for all actors participating in the management process. In this regard, planning engineers often face an inherent conflict to provide reliable decision support for complex questions ...
Tekran provides trace-level mercury analytical and monitoring technology for a variety of applications including laboratory-based sample analysis, continuous point-source emissions and ambient air monitoring. This article focuses on and highlights the results of an application of Tekran’s Ambient Air Mercury Speciation System. In contrast to most other heavy metals, mercury (Hg) and mercury ...
The large global warming potential of nitrous oxide (N2O) is currently of general concern for the water industry, especially in view of a new regulatory framework concerning the carbon footprint of water resource recovery facilities (WRRFs). N2O can be generated through different biological pathways and from different treatment steps of a WRRF. The use of generic emission factors (EF) ...
Near real-time continuous monitoring systems have been proposed as a promising approach for enhancing drinking water utilities detect and respond efficiently to threats on water distribution systems. Water quality sensors are aimed at revealing contamination intrusions, while hydraulic pressure and flow sensors are utilized for estimating the hydraulic system state. To date optimization models ...
Background Wuhan is the capital city of Hubei province in central China and has 166 lakes that cover 2,217 square km (856 square miles) and approximately 25% of the city. This surface water coverage is one of the world’s highest. The Wuhan Environmental Protection Bureau (WHEPB website: http://www.whepb.gov.cn) is responsible for monitoring the surface water ...
This study presents a method for optimal selection of sampling stations for representative and effective water quality monitoring of a reservoir on the basis of information theory. We adopt an objective function used for the design of other hydrological monitoring networks such as rain gauge networks. Unlike rain gauges, in which only a single variable of rainfall is of interest, water quality ...