natural-based regeneration absorbent Articles

  • Replacement of Two Separator /Absorber Units at an Acid Regeneration Plant

    If professional engineers were asked to define a perfect world, their answer would no doubt include projects that were blessed with a clear and precise description of the requirements, a viable schedule, availability of materials, and a reasonable amount of design freedom. Of course there is no perfect world, so engineers must work with restrictions that vary from difficult to almost impossible. ...


    By Fabricated Plastics Limited

  • Capture of carbon dioxide from flue gas using solid regenerable sorbents

    Carbon dioxide emissions from the combustion of fossil fuels are a significant factor in global climate change. Large stationary sources such as coal-fired electric generating plants are likely to be the most cost-effective targets for carbon dioxide capture. At present, liquid amine-based scrubbing systems are the only processes available for this application. Processes based on regenerable ...


    By Inderscience Publishers

  • Dry regenerable sorbents for the separation and capture of CO2 from large point sources

    The combustion of fossil fuels generates large quantities of carbon dioxide (CO2), a greenhouse gas most likely to influence global warming and climate change. Large stationary sources that include coal-based electric generating stations are plausible targets for the removal of CO2. Chemical absorption of CO2 is viewed as one option that could be applicable ...


    By Inderscience Publishers

  • Preliminary Report on CANSOLV® System Commercial Experience

    Three reference plants utilizing the CANSOLV® System aqueous diamine based regenerable SO2 scrubbing technology are now operating in regular commercial production. A unit in Europe is treating the tailgas from an incinerator burning a ...

  • An Evaluation of Magnetic Ion Exchange (MIEX®) for NOM Removal

    A new process for the removal of natural organic matter (NOM) was developed in Australia by Orica Watercare and South Australian Water Corporation. It employs a strongly basic anion exchange resin to remove NOM from water. In the first stage of the process, the (180 μm) MIEX® resin is mixed with the water to be treated and its small size encourages rapid removal of NOM. The resin beads also ...


    By IXOM Watercare

  • How molecular sieve DESICCANT is used for oxygen generation?

    Molecular sieves are basically three dimensional aluminosilicate that contains cavities inside the crystal. Through various channels these cavities are interconnected with each other. These channels are called pores. All the pores have an exact diameter which is uniform. This diameter plays a very crucial role in the application of these zeolites. This means that the molecules which have a ...


    By Sorbead India

  • How sensitive is your treating plant to operating conditions?

    Abstract Normal expectations in operating amine treating plants for acid gas removal is that small changes in operating conditions will result in correspondingly small responses in plant performance. However, such expectations are not always well founded. To establish credibility for the process simulator used in the design of a new LNG plant (ProTreat ), we begin by comparing its mass ...


    By Raschig USA Inc.

  • Adsorption performance and mechanism for removal of Cd(II) from aqueous solutions by D001 cation-exchange resin

    The adsorption and desorption properties of D001 resin for Cd(II) has been investigated. Batch studies were carried out with various pH, contact time, temperature and initial concentrations, and then column studies were conducted. The results showed that the optimal adsorption condition was at pH value of 3.0 in HAc-NaAc medium. The resin exhibited a high Cd(II) uptake of 185.8 mg/g at 298 K. ...


    By IWA Publishing

  • Cost Effective, Easy to Operate H2S Removal in Central China

    Documento sin título In 2000, ...


    By Merichem Company

  • Organics Monitoring (TOC)

    Total organic carbon (TOC) testing is the traditional method for determining organic matter in water. However there is a far more practical, affordable and often more useful way to measure organic matter. UV absorbance testing (UVA) is rapidly becoming the preferred method of measuring organics even when the levels of organics being measured are very small. Organic Matter Organic ...


    By Real Tech Inc.

  • Minimizing Operating Costs in VOC Abatement Equipment

    Untitled Document As governmental regulations of environmental emissions become more restrictive, the average concentration of Volatile Organic Compounds (VOC's) has decreased as more ...

  • Amine Purification System (AmiPur®) – Continuous Heat Stable Salts Removal from Amine Solutions

    1.Introduction Amine scrubbing solutions are used to remove hydrogen sulfide (H2S) and carbon dioxide (CO2) from gas streams and LPG in many oil refineries and natural gas conditioning plants. Due to its high selectivity to H2S, Methyldiethanolamine (MDEA) is most commonly used to remove H2S in the presence of CO2 from gas streams and LPG. Amine plant operational problems, such as ...


    By Eco-Tec Inc.

  • Urban greenery: Initiation to UEM

    I think that I shall never see a poem lovely as a tree. These words by American poet Joyce Kilmer capture the love most people share for trees. This sentiment may be especially appropriate in urban areas where trees are particularly noticeable and play critical roles in the quality of urban life. Trees are also major capital assets in our cities and towns as much an integral part of the scene as ...


  • Why clean transformer oil?

    Related Website: http://www.oilrenew.com http://www.leizeyan.com http://www.zhongnengcq.cn ...


  • Case study - Amine tail gas treatment

    COVERING YOUR TAIL GAS The discovery of new shale formations throughout the world and the development of new drilling technologies have increased natural gas production and prompted government agencies to instigate tighter air-pollutioncontrol regulations on processing operations. Unfortunately, meeting environmental regulations is not a profit-generating endeavor. Simply put, the time ...

  • Methods of Water Purification

    This article is excerpted from 'Pure Water Handbook' published by Osmonics®, Inc. of Minnetonka, Minnesota USA and is printed with permission of Osmonics, Inc. Water treatment can be defined as any procedure or method used to alter the chemical composition or natural 'behavior' of a water supply. Water supplies are classified as either surface water or groundwater. The majority of public or ...

  • Single-valve RTO Eliminates Odors and VOC

    Untitled Document Less expensive to purchase, ...

  • Drying plastic resin pellets in injection- Molding & Extrusion processes case study

    Application Moisture concentrations are measured in the dry purge air used to remove moisture from a hopper containing plastic resin pellets used in injection-molding and extrusion processes. Problem Moisture contaminates the plastic resin pellets causing several quality problems in the finished plastic products. Moisture causes clear ...

  • Biogas desulphurisation using the DMT multiple stage Sulfurex® process

    Global rising energy costs are focusing efforts by many industrial and municipal entities to find new sources of energy. Generating electricity from Biogas is of course nothing new however the cost of cleaning up certain Biogas streams with excessive levels of Hydrogen Sulphide (H2S) has previously proven to be financially unsustainable. Rising energy costs combined with improvements and cost ...

  • Food Processing: Odor Control in Edible Oil Processing

    Abstract: The problems with odor around a typical edible oil deodorizer are discussed in detail, and a three-step solution to eliminate these problems is presented. The three steps are a distillate recovery system which recovers most of the fatty acid in the deodorizer vapor discharge as a valuable byproduct, a closed loop barometric cooling water system which keeps the fatladen ...


    By CR Clean Air Group, LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you