natural gas dryer Articles

  • Mercury recovery from industrial waste and toxic residues of natural gas drilling

    econ's client in the east of Germany is one of the few specialised companies in Europe for the treatment of mercury contaminated waste. Typical input material for this type of treatment is sludge from the natural gas industry or other residues from chemical processes, i.e. contaminated filter cake from waste water treat-ment. Among their most important clients are Shell, ExxonMobil, Wintershall ...


    By econ industries GmbH

  • Souderton looks at viability of investment in sludge dryer

    Despite the day's snowy weather, the Souderton Borough Council met for a brief session March 2 and discussed the newest option for the borough's sludge removal. The borough has been looking for a device to dewater the sludge produced by the in-town treatment facility for nearly two years. Removing the water would allow the borough to apply the sludge to land, which would save on hauling costs. ...


    By Therma-Flite Inc.

  • High efficiency odour control for sludge dryers, sludge pasteurizers and sludge stabilisation using lime and biogas treatment

    Abstract This paper summarizes ERG’s experience of supplying odour control for sludge dryers, sludge pasteurizers, sludge lime stabilization and biogas treatment and indicates areas for improvement.   Keywords Odour control, chemical scrubbing, carbon filters, waste water, OdorgardTM, sludge dryers, sludge pasteurizers, lime ...

  • Upstream Particulate Removal for Rtos on Direct-Fired Osb Dryers – How much is enough?

    Abstract Since 1994 Regenerative Thermal Oxidizers (RTOs) have been applied to direct wood-fired OSB dryers for the purpose of VOC abatement. In early direct wood-fired OSB dryer applications many OSB producers felt that upstream particulate control was not necessary. However, the ash from the combustion of wood waste created a host of new operational problems for the RTO systems. This paper ...

  • Landfill Gas Use Trends In The United States

    MOST PEOPLE think of landfills as a necessary evil at best, but our current primary method of waste management generates a by-product with significant energy value - landfill gas (LFG). Collection and control of LFG results in significant reductions in greenhouse gas (GHG) emissions. With the greater focus on climate change, a burgeoning market for GHG emission offsets is emerging and landfills ...


    By BioCycle Magazine

  • Landfill gas, canola and biodiesel: working towards a sustainable system

    Snohomish County in western Washington State began converting its vehicle fleet to a blend of biodiesel in 2005. As prices for biodiesel rose due to increased demand for this cleaner-burning fuel, Snohomish County looked to its farmers to “grow” this fuel locally. Suitable oil seed crops for biodiesel feedstock include canola, mustard and camelina. The residue, or meal, has high value ...


    By Waste Advantage Magazine

  • Adwest Technologies flameless retox rto oxidizers with acid gas scrubbers for cost effective voc & odor abatement

    Adwest Technologies, Inc. provides cost effective Flameless Regenerative Thermal Oxidizers (RTO) with acid gas scrubber systems for cost effective VOC and odor abatement from malodorous VOC processes including food processing, rendering, petfood, biopharma spray dryer, bakery oven, composites, foundry, biogas, sludge dryers and waste water treatment plants (WWTP) off gas applications.  ...

  • Drying plastic resin pellets in injection- Molding & Extrusion processes case study

    Application Moisture concentrations are measured in the dry purge air used to remove moisture from a hopper containing plastic resin pellets used in injection-molding and extrusion processes. Problem Moisture contaminates the plastic resin pellets causing several quality problems in the finished plastic products. Moisture causes clear ...

  • Case study - Spindle utilities module

    Business Situation The existing method of tracking utility usage at these industrial laundries was highly manual, unreliable, and time consuming. Total utility consumption from bills was entered into large spreadsheets and analyzed over periods that were often 3 months or more in arrears. The report merely told managers what they already knew—they had overspent on natural gas; ...


    By Dober Chemical Corp

  • Sample System Best Practices for Water and Hydrocarbon DP Applications

    Abstract Sampling techniques for BTU and moisture measurements are well understood but applications beyond the routine requires additional attention to detail. Two such applications are the subject of this paper. The first is the measurement of low level moisture (1 – 1,000 ppbv) for cryogenic processes. Measuring moisture below 1 ppm is an entirely different world from the traditional ...

  • Possibility of biomass gasification in tea manufacturing industries in Assam, India

    Tea manufacturing industries in India use natural gas, tea drying oil, wood, and coal for process heat. India is the second largest producer of tea [(1,137.07, China 1,761.00) million kilogram] in 2012. About 0.6–1.2 kg of coal is required to produce one kilogram of dried tea with average moisture of 2.5–3 percentage (w.b.). Biomass gasification is an established renewable energy technology for ...


    By Inderscience Publishers

  • Heat/Web offset printer uses the TRITON Series Thermal Oxidizer

    A heat-set/web offset printer recently installed a TRITON-Regenerative Thermal Oxidizer from Catalytic Products International, Inc. The TRITON system was contracted on a turnkey basis, in which CPI engineered and installed; the ductwork system from all dryers, foundation work, electrical integration, and rigged the oxidizer. The project was installed on time and without any added costs. The ...

  • Springfield MA case study

    At Their Disposal Komline-Sanderson minimizes solid waste disposal costs in Springfield, Mass The City of Springfield, Mass., currently uses a contract composting facility, which is located at the 65 MGD Bondi Island Wastewater Treatment Plant to dispose of their solid waste. The composting facility requires a feed of 40–45% solid materials to ...


    By Komline-Sanderson

  • Case study - Keeping ethanol production green

    OVERVIEW Originally published in Pollution Engineering Magazine. In an effort to reduce the world’s dependence on fossil fuels, there has been a major push towards alternatives. Ethanol has been at the forefront of this movement because it reduces greenhouse gas emissions from automobiles and its production has a positive net energy balance. The homegrown fuel also ...

  • High efficiency odour control for wastewater treatment

    Since the banning of sewage sludge disposal at sea in 1998 secondary treatment of sludge is now a vital part of waste water treatment. Initially many water companies opted for incineration, but over the last 10 years other options have been adopted such as producing stabilised sludge and pelletised dried sludge for use as fertiliser for agriculture. Currently over 62% of sludge is used in ...

  • Ciba Specialty Chemicals makes energy savings of over 7% with the Maxsys Fuel Systems

    Ciba Specialty Chemicals is a world leading Chemicals Manufacturer with a global presence whose products and services are sold in over 120 countries on all continents and employing around 15,000 people at 69 sites in 22 countries worldwide. The Fuel Systems from Maxsys was able to deliver impressive gas savings of 7% to Ciba’s plant operations. The ...


    By Maxsys Fuel Systems Ltd

  • Gatineau Sewage Treatment Plant, Gatineau, Quebec, Canada

    Project No. 1 Industrial Boiler Application A FLU-ACE waste heat recovery system installed to process all flue gases from three boilers. The system recovers up to 3.5 mmBTU/h of waste heat which is re-used for heating the digester sludge. The main fuel for the boilers is recycled methane based sewage gas generated from the plant’s anaerobic digesters. 'The installation ...

  • Energy Savings on Process Heating Units Case History

    The Customer This specialty chemical company is a leading supplier of performance polymers. Their products are used in a wide range of applications including adhesives, coatings, consumer and personal care products, sealants, lubricants, medical, packaging, automotive, paving, roofing and footwear products. The Project The company was increasing the ...

  • Heat Pump Used to Drain Contaminated Sludge in a Steel Factory

    Summary In 1987, new regulations required that factories dispose of their contaminated water and waste themselves. Making galvanised steel wire, the Stelfil factory produces sludge contaminated with lead and zinc. Stelfil spent thousands of dollars to bury this waste and evaluated three systems to remove most of the water: a gas dryer, an induction heated screw conveyor and a heat pump system. ...


  • Clearing the air: the use of bio-oxidation for industrial air emissions control

    The wood products industry began rather ardous road to emissions control in the early 1990s with the first installation of a thermal oxidizer (an RTO) at a California MDF facility, for volatile organic compound (VOC) control. During the ensuing years, virtually every panel board facility has had to control emissions of VOCs, and up until the last few years, always with some sort of thermal ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you