nitrogen generator adsorption Articles

  • How do pressure swing adsorption nitrogen generators work?

    Adsorption is a gas separation process whereby the gas molecules adhere to a surface when under pressure. Adsorption allows for the ability to separate specific gasses, such as nitrogen, from compressed air by selecting an adsorbent material which unwanted gases more readily diffuse into. In the case of air-to-nitrogen separation, compressed air is passed through a cylinder containing a Carbon ...

  • How molecular sieve DESICCANT is used for oxygen generation?

    Molecular sieves are basically three dimensional aluminosilicate that contains cavities inside the crystal. Through various channels these cavities are interconnected with each other. These channels are called pores. All the pores have an exact diameter which is uniform. This diameter plays a very crucial role in the application of these zeolites. This means that the molecules which have a ...


    By Sorbead India

  • NOx in Non-Utility Industries - Part I NOx in Non-Utility Industries - Part I - Air emission origins, best control solutions and monitoring methodology for nitrogen oxides

     Problems with reducing nitrogen oxides (NOx) are widespread in the general process industries. These industries, together with medium size utility and power generators contribute about 15 percent of global NOx emissions. The emission sources addressed include various heaters employed in chemical and petrochemical plants, nitric and sulfuric acid plants, glass furnaces, iron and steel mills, ...


  • Primary treatment of anaerobic landfill leachate using activated carbon and limestone: batch and column studies

    Leachate generated from an old landfill in Taiping, Perak, Malaysia contains high colour, COD, iron and ammoniacal nitrogen. Activated carbon?limestone mixture was used as a primary treatment process. More than 86% of colour and COD, 95% of iron, and 48% of ammoniacal nitrogen were removed by a mixture of activated carbon and limestone (15:25 by volume) in the batch study compared with 70, 80 and ...


    By Inderscience Publishers

  • Physico-chemical treatment of anaerobic landfill leachate using activated carbon and zeolite: batch and column studies

    Leachate generated from one of the old landfills in Malaysia contains high concentrations of colour, COD, iron and ammoniacal. The ability of activated carbon-zeolite mixtures as an adsorbent was investigated in this research. Results of the batch experiments indicated that more than 522.2 mg/g of colour, 52.63 mg/g of iron, 232.6 mg/g of COD and 21.01 mg/g of ammoniacal nitrogen were removed by ...


    By Inderscience Publishers

  • Woodside goodwyn - treating flushing fluid

    Client: Woodside Goodwyn During a scheduled shutdown on the Goodwyn platform, Woodside contracted CETCO Oilfield Services to treat the fluid generated during a flushing operation on the Goodwyn West Alpha condensate (water) stripping column T-100 and, install a permanent CETCO adsorption OIW (Oil in Water) package. During the shutdown of the Goodwyn platform, the vessel was drained, purged with ...


    By CETCO Energy Services

  • Case No : 601: Reducing NOx emissions from Nirtic Acid Manufacturing Plants with NOx Abatement or NSCR

    NOx Abatement is a Non-Selective Catalytic Reduction (NSCR) technology that has a long and proven track record for controlling NOx emissions from nitric acid manufacturing plants. It can be used to alter the NO to NO2 balance (decolourization) or to eliminate NOx through catalytic reaction with a fuel as a reductant. ...

  • Hydrocarbon evaporative emissions & control for automotives

    Even the cleanest and most efficient vehicle on the market today still pollutes the air and otherwise damages the environment. Motor vehicles emit several noxious pollutants which vehicle emissions standards are designed to regulate. Vehicles generally emit Hydrocarbons (HC), Carbon monoxide (CO), Nitrogen oxides (NOx) and Fine airborne particulate matter (PM) as pollutants that require control. ...

  • Biofiltration as pre-treatment to water harvesting and recycling

    This paper presents the results of the long term biofilter experiments conducted with raw stormwater collected from a canal at Carlton, in Sydney. Anthracite and granular activated carbon (GAC) were used as a single filter media in biofilter columns. Media heights of 75 and 40 cm were used. The filter columns were operated at filtration velocities of 0.12 and 0.25 m/h. The removal efficiency for ...


    By IWA Publishing

  • Biofilters vs Asdorption

    In the last three decades biological technologies have emerged as a sustainable and economically-viable alternative compared to traditional techniques like adsorption/absorption for purifying gases. They were well-received initially in the industry and interesting products with good results were carried out for several years. However, owing to a series of reasons that will be detailed in this ...


    By Bioconservacion SA

  • Biological Wastewater Treatment

    Untitled Document The use of microorganisms to remove contaminants from wastewater is effective and widespread. To choose the right system from the many options offered, ...


  • Controlling Odors from Waste Water Treatment Plants

    INTRODUCTION In recent years, there is growing public awareness of odors from waste water treatment plants, which mainly stems from the following observed trends: The public is less tolerant of objectionable odors from waste water treatment plants; Many waste water treatment plants have seen residential, commercial, or other developments established near the facility ...


    By PRD Tech, Inc.

  • Case study - Pemaco superfund site remediation

    OVERVIEW Pemaco was formerly a chemical facility located in a light industrial and residential area of Maywood, CA, adjacent to the Los Angeles River. No one knows how long hazardous substances had been leaking into the ground but the operations date back to the 1940's.  Up until closure of the facility in 1991, chlorinated solvents, aromatic solvents, and flammable liquids had ...

  • Biomethane enters the gas grid article for energy world

    The Carbon Plan, published in 2011, aims to reduce UK carbon emissions by a quarter from 1990 levels. With the current policies in place, the UK is on target to reduce emissions by over a third by 2020 and with the introduction of new technologies this should increase to an 80% reduction by 2050. However, currently around half the UK’s carbon emissions result from heat related processes and ...


    By CNG Services Limited

  • NOx in Non-Utility Industries - Part II - Control options and monitoring methodology

     This the second in a two-part series. Part I, which appeared in our June 2001 issue focuses on air emission origins of nitrogen oxides (NOx) in non-utility industries. Choice of the NOx control technology is dependent on many factors, including regulatory requirements, technical feasibility, cost and public perception. Figure 1, compiled based on publications [1-5], presents a summary of ...


  • Evaluation of Tire Derived Rubber Particles for Biofiltration Media

    ABSTRACTCurrently, on average, one tire is discarded in the U.S. for every man woman and child every year. While the reuse market for used tires has increased over the years to approximately 75%, there are still an estimated 2-3 billion used tires stockpiled in the U.S. Finding economical and sustainable end uses for this tire material is an ongoing challenge to environmental engineers and ...

  • Operator Strategies : Sorting Out the Plastic

    BETTER BUGS Ideas and products in the Better Bugs category attempt to affect the biological components and biochemistry of processes by altering the mix of microorganisms or enzymes present. After all, biology is the foundation of many, if not most, organics recycling systems. Pyrophiles: The first example of Better Bugs involves pyrophilic organisms, bugs that can take the heat. This example is ...


    By BioCycle Magazine

  • Toxicological and Environmental Safety Data - Case Study

    Introduction AGRAGEL is a cross-linked copolymer of acrylic acid and acrylamide partially neutralized as potassium/ ammonium salt. The polymer is in its dry form a granulate and forms a gel-like material upon addition of water or aqueous solutions. Due to the cross-linking it is insoluble in water. Uptake of water is facilitated mainly by the negative carboxylic groups of the polymer and ...

  • Cleaning Up Gasification Syngas

    Documento sin título ...


    By Merichem Company

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you