no-analyzer Articles

  • Two Detector Solution to Analyzing Sulfur

    Sulfur compounds are reactive, corrosive to pipes, and destructive to catalysts in petroleum refineries. Sulfur emission are strictly regulated globally. When released into the atmosphere sulfur dioxide converts to sulfuric acid resulting in adverse effects on human health and the environment. Sulfur detection is found useful in many other industries; therefore, detection of sulfur compounds in ...


    By Restek Corporation

  • Introducing LaserGas III SP CO – a combustion analyzer for rough environments

    NEO Monitors unveils the industry’s most compact CO combustion analyzer suitable for the most demanding environments. LaserGas III CO includes measurement of CH4, H2O and temperature in one single unit designed to reduce risk. Based on decades of experience and customer feedback, NEO Monitors has designed an Ex-d certified tunable diode laser (TDLS) analyzer. The instrument is ...


    By NEO Monitors AS

  • How to analyze H2S, All Mercaptans, THT and Total Sulfur for Monitoring Natural Gas or Gaseous Fuels in Metering Stations

    Chromatotec has been pleased to participate to the last issue of Petro Industry News with an article on “How to analyze H2S, All Mercaptans, THT and Total Sulfur for Monitoring Natural Gas or Gaseous ...


    By Chromatotec Group

  • LGD F200 - Designed for easy zeroing and span adjustments

    Regular zeroing and span adjustments to gas analyzers in the field are suggested and required for a variety of reasons. Compliance to environmental standards, e.g. those outlined in the US EPA (40 CFR) or EN 14181 is an important factor. Special application conditions, e.g. a varying gas matrix or compensating for pressure effects can be additional reasons, where a zeroing and span adjustment ...


    By Axetris Ag

  • TOC Analysis for Standard Methods 5310B: High-Temperature Combustion Method

    Introduction Total Organic Carbon (TOC) is a rapid method that analyzes for organic carbon and expresses the result as the amount of carbon found. It is a non-specific method unable to distinguish between various organic species and only indicates that organic carbon compounds are present. Organic carbon analyzers operate by the determination of the amount of total carbon present in a ...

  • Analysis of PeCOD Technology and Comparison to Dichromate Method

    Abstract The main objective of this report was to determine if a correlation exists between peCOD technology and the dichromate method of estimating Chemical Oxygen Demand (COD). Additional investigations described in this report were: to identify whether particle size in water samples affects the estimate of COD obtained by peCOD analysis and, to identify whether peCOD analysis is ...


    By MANTECH INC.

  • Closing The California Clean Energy Divide

    Reducing Electric Bills in Affordable Multifamily Rental Housing with Solar+Storage Executive Summary BATTERY STORAGE IS EMERGING AS AN effective new strategy for reducing electricity costs for affordable multifamily rental housing in California. Battery storage systems not only provide economic returns today, they can also preserve the value of solar in an ...


    By Growing Energy Labs, Inc.

  • Nitrogen Demand Increases for Semiconductor: How Safe Are You?

    As users demand ever-smaller smartphones and better televisions, semiconductor manufacturing plants are tasked with developing new products faster and using new materials. Key to the continued success of the semiconductor industry are inert gases, which include nitrogen and argon. When used safely, both nitrogen and argon play a number of important roles within the semiconductor ...

  • 100 Simple Ways To Save Water

    To improve water conservation install a rain sensor, it turns off your irrigation when it rains. Use a weather-based controller. The use of smart controllers can reduce water usage 24% a year on average. Learn about available rebate programs ...


    By Jain Irrigation, Inc

  • Real Time TOC Analysis in Steam and Condensate

    Executive Summary Steam in petro/chemical plants could be contaminated with hydrocarbons (TOC = Total Organic Carbons) from various sources. In any case this is a sign for defects in the process, whether it they occur in the heat exchanger, the blow down vessel, the condensate recovery or other parts of the system. Conventional solutions to monitor such contaminations use TOC- ...


    By JCT Analysentechnik GmbH

  • Wind Energy Production Estimates: Moving Beyond Time Averages

    No need to be a statistician to see that averages are often useful to compare different things. And yet, they often fall short as a true measure of performance. For instance, we use averages to compare the current weather against the climate normals or to get a sense of how our favorite sport team or player is doing. Team (player) statistics are a concise way of combining the scores from many ...


    By AWS Truepower, LLC

  • The productive environmental laboratory: BSK Labs boosts efficiency with Metrohm IC

    BSK Labs runs a number of environmental laboratories and service centers along the west coast of the US. A total of 70 employees – including microbiologists, chemists, lab technicians, and support staff – make sure that the 200 to 350 samples that come in every week are analyzed. BSK Labs specializes in potable water chemistry, ground water monitoring, storm water runoff, solid waste ...


    By Metrohm AG

  • Research NOx Analyzers

    ECO PHYSICS provides environmental experts with exceptionally sensitive and precise NOx measurement instruments. Please take a look at our newest press release on our research NOx analyzers below. Bound by the same laws of nature, ecology and physics are close associates in an on-going battle to preserve air quality around the globe. One of our planet's champions is Swiss-based ECO PHYSICS. The ...


    By ECO PHYSICS INC.

  • Forklift Emissions Analyzers

    Forklifts are commonly used in warehouses of various size and capacity for the movement and shipping of goods; however, the unoptimized engines can produce excess quantities of silent and deadly CO gas that can risk the health and safety of the workers. When forklifts are brought in for service usually the CO gas isn't measured. If the CO gas isn't measured and the engine properly optimized then ...

  • Assessing performance of on-line nitrate analyzers

    Traditionally, activated sludge processes were designed to remove organics and suspended solids from wastewater. The justification for including nitrogen control in wastewater treatment facilities began with the need to protect receiving waters from the increasing problem of eutrophication and hypoxia (low levels of dissolved oxygen in bottom waters, generally less than 2 mg/l). One of the ...

  • Hydrogen Chloride Analyzer (HCl, H2O)

    LGR's Hydrogen Chloride Analyzer (HCl, H2O) provides sensitive measurements of HCl in ambient air or in industrial process flows (e.g., coal and cement exhaust streams) with extremely high precision and sensitivity. No longer do you have to spend a lot of money or wait a long time to measure HCl with extremely high sensitivity – LGR's HCl Analyzer provides measurements every second with ...

  • Analyzing for Trace CO and CO2 using a Total Hydrocarbon Analyzer

    Untitled Document The purity of Specialty Gases is determined by the measurement of various contaminants including Total Hydrocarbons. Low level measurements of carbon ...


    By MOCON, Inc. - Baseline

  • Analyzing the lifecycle of beer case study

    Challenge: A global brewing company requested Antea Group's Global Corporate Consultancy assess greenhouse gas (GHG) emissions that result from the complete life cycle of beer and how the most common package types contribute to the "carbon footprint" of its products. The analysis was to be conducted in the context of the entire product value chain, from materials extraction and agriculture ...


    By Antea Group - USA

  • Sulfur Compounds Analyzer MEXA-1170SX

    The MEXA-1170SX is a continuous gas analyzer for sulfur compounds existing in engine emissions. It can measure SO2 concentration and the amount of total reduced sulfur compounds (TRS), such as H2S, separately. It can also measure the total sulfur compounds (TS) that contains both gaseous compounds and liquid compounds in PM, such as SO3. By utilizing ultra-violet fluorescence (UVF) method and ...


    By HORIBA Europe GmbH

  • Analyzing sulfur in soil and sediment with handheld XRF

    Background Sulfur creates more than nasty odors. Exposure to low levels (0-10ppm) of hydrogen sulfide (H2S) causes irritation of eyes, nose, and throat; higher levels can cause headaches, dizziness, nausea and vomiting, coughing, and breathing difficulty. H2S and numerous other odor-causing compounds are generated as a result of organic material decomposition. In the case of the Muddy River in ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you