non-clog effluent pump Articles

  • Seven Ways Your Facility Isn’t Meeting Effluent Regulations and How to Solve Them

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business, especially when it comes to meeting effluent regulations. This is an important part of the wastewater treatment process to consider, as ignoring it could earn your ...


    By SAMCO Technologies, Inc.

  • Bioremediation of Effluent the Pulp and Paper Industry

    The treatment of industrial effluent from the paper manufacturing facilities in British Columbia is a major concern because the effluent is discharged into prime salmon habitat in the marine environment (Cross, 1994). High levels of biological oxygen demand (BOD) in the effluent reduce the dissolved oxygen (DO) available to species in the marine environment. In 1988, the Federal Department of ...


  • Treatment plant protected by effluent monitor at major drinks factory

    The installation of a BioTector continuous TOC (Total Organic Carbon) monitor to police the front end of Cobevco’s wastewater treatment plant has enabled tight control of the treatment process. Delivering results 20 times faster than laboratory techniques, the monitor at the Elton facility in Cheshire provides advance notice of organic overload so that the plant is able to instantly divert ...


  • Pumping Stations, Your Options

    There are many things to consider when thinking about pumping systems in developments, our Pumping Stations Manager talks through the options. Along with budgets, there are many factors to consider when choosing the right pumping station for a development, such as; Technical specifications – how much effluent is the pumping station going to need to remove? ...


    By T-T Pumps Ltd.

  • Large Diameter Impellers Make Trash Pumps More Versatile

    The introduction of these impellers allow for a higher range of discharge pressure. Pumps are available in many types—diaphragm, positive displacement and progressive cavity—but the most common is a centrifugal pump. Centrifugal pumps have an impeller that spins, transferring energy to the fluid by centrifugal force and directing the water to the discharge point within the ...


    By Griffin Dewatering

  • Sewage Pump - Klargester is the market leader for small and medium-sized domestic treatment plant and waste water treatment systems in the UK

    There are a variety of solutions on the market for properties in the UK that are unable to connect to the main sewer by gravity. However, UK building regulations dictate that pumping stations must be used whenever possible. As a result, pumping stations are the most commonly specified solutions for off-mains developments, ahead of sewage treatment plants, such as the Biodisc, and septic tanks. ...


    By Kingspan Environmental Ltd

  • Pumping Stations - Klargester`s range of package systems are efficient, economical to install and are available on short lead-times to fit in with tight construction schedules

    There are a variety of solutions on the market for properties in the UK that are unable to connect to the main sewer by gravity. However, UK building regulations dictate that pumping stations must be used whenever possible. As a result, pumping stations are the most commonly specified solutions for off-mains developments, ahead of sewage treatment plants, such as the Biodisc, and septic tanks. ...


    By Kingspan Environmental Ltd

  • SaniTEE: an ideal septic tank wastewater screen

    SaniTEE is an effluent wastewater screen (commonly known as an effluent filter) that reduces the gross suspended solids discharged in septic tank effluent. This helps extend the lives of drain fields, reduces clogging of orifices in effluent disposal systems, and allows use of non-solids handling effluent pumps. It is shown in Figure 1. It fits inside a standard septic tank outlet tee by dropping ...


    By Bio-Microbics, Inc.

  • Primary clarification evaluation and optimization study

    This report describes the evaluation and optimization of primary clarifiers at the San Jose/Santa Clara Water Pollution Control Plant. Part 1 of this report examines the individual effect of the concentration of non-settleable solids, detention time, clarifier depth, sludge blanket level, and design feature of the clarifier on primary effluent quality and removal efficiency. Part 2 of this report ...


    By Entech Design, Inc.

  • Mono nov’s compact mutrator solves sewage problem at park

    The services in Woodbank park are used by Stockport Metropolitan Borough Council staff working in the area, as well as members of the public using the sports facilities and visiting the park. The council wanted a simple and reliable alternative to handle raw effluent and enable them to link into a foul sewer some 500m away from the community services building. Engineers orignally opted to install ...


    By NOV Mono - Mono Pumps Ltd

  • In-Barge Dewatering Application Offers Innovative Solution Where Lay Down Area Is Unavailable - Case Study

    Tight space constraints are solved by customized Geotube   units in floating barges. Geotube dewatering technology has been used to deliver high performance solutions all over the world in more than 50 countries. Over 2,000 dewatering projects have taken advantage of Geotube containers since 1991. These have involved both small and large situations for lagoon cleanout, ...

  • Enviro - Septic® Systems Achieve Even Distribution without Pressure Dosing

    Abstract: Enviro-Septic Systems do not use pressure distribution. Pumps are used only if necessary to gain elevation to the treatment field. Pressure distribution has the potential to disrupt the settling of solids within the pipe. Testing has confirmed that Enviro-Septic^ achieves even distribution throughout the system naturally, through the development of a controlled bacterial treatment layer ...

  • Crown point wastewater treatment plant case study

    Project Summary Due to capacity issues, the City of Crown Point was forced to either start planning for expensive capital expansions of the facility or to investigate alternative technologies that would increase capacity. In 2007 the City chose In-Pipe Technology to improve the treatment capacity of the plant without capital improvements. In-Pipe's goal is to improve the efficiency of the ...

  • Mono provides packaged system benefits for prestigious hotel

    Designed specifically to meet domestic requirements for handling raw sewage, the Mono Grifter system first usesa macerator to reduce solids within the flow to small particles, making it suitable for onward pumping by a Monoprogressing cavity pump. The Grifter system incorporates a 0.75 kW motor, plus suction and delivery pipework, non-return valves and rising main isolator valves, which are all ...


    By NOV Mono - Mono Pumps Ltd

  • Recovery of Acrylic Latex from Wastewater: BASF Australia

     BASF Australia is saving $120,000 per year after installing a $40,000 pump that enabled them to recover valuable acrylic latex previously flushed to effluent when equipment was washed. They are also saving on water costs and thinking about cleaner production led the company to improved scheduling which boosted productivity. Background Based in Victoria, BASF Australia ...


  • Advanced Enviro-Septic™ Systems Achieve Even Distribution without Pressure Dosing

    Abstract: Advanced Enviro-Septic™ Systems (AES) do not use pressure distribution. Pumps are used only if necessary to gain elevation to the treatment field. Pressure distribution has the potential to disrupt the settling of solids within the pipe. Testing has confirmed that AES achieves even distribution throughout the system naturally, through the development of a controlled bacterial ...

  • Case study - KLa Slot Injector™ Aeration System For CFAS Process

    Project Name: Touch Panel Manufacturing Plant Wastewater Treatment Location: Tainan Science-Based Industrial Park, Taiwan Type of Bio-Process: CFAS Aeration/Mixing Technology: KLa Slot Injector System Operational Since: July, 2011 The Challenge The plant manufactures ...


    By KLa Systems, Inc.

  • Wastewater Solutions for a hospital in Libya case study

    Continuing the trend of significant growth in Libya for WPL Ltd and El Zulal, the most recent development has been to provide wastewater treatment solutions for a hospital near Ubari. These facilities were provided as part of a co-operation project between El Zulal and the Libyan Government. El Zulal are the local expert distributors and installers for WPL's ...


    By WPL Ltd

  • Modelling biological Cr(VI) reduction in aquifer microcosm column systems

    Several chrome processing facilities in South Africa release hexavalent chromium (Cr(VI)) into groundwater resources. Pump-and-treat remediation processes have been implemented at some of the sites but have not been successful in reducing contamination levels. The current study is aimed at developing an environmentally friendly, cost-effective and self-sustained biological method to curb the ...


    By IWA Publishing

  • Rold Model Water Recycling Program

    ABSTRACTThe Viejas Band of Kumeyaay Indians, a federally recognized tribe, vested with authority by the U.S. Environmental Protection Agency (USEPA), form the Tribal Government to regulate all activities concerning water quality issues within the reservation boundaries. The Reservation has 400 non-transient residents and an average of 5,000 transient residents. The transient population visits the ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you