non-destructive Articles

  • Ultrasonic Testing For Non Destructive Testing

    Ultrasonic Testing or UT as its known has programs in a wide range of sectors, from aerospace, automobile, to substance, oil, large storage space, and power creation and overseas. UT is aspect of a selection of techniques known as NDT (Non Destructive Testing) methods. Their objective in industry is to allow the examination of parts and equipment ...


    By Non Destructive Testing Lab

  • The ABCOV® Method of Non-Thermal Asbestos Destruction

    The ABCOV® Method destroys asbestos with a non-thermal, United States Federal Environmental Protection Agency approved, chemical-physical process that: Eradicates Asbestos from the Environment; Stops Human Exposure to Asbestos; Provides Efficient and Cost Effective Asbestos Destruction; Eliminate Landfill ...


    By ABCOV Companies

  • Quantifying Chlorophyll in leaves using a non-destructive method with the UniSpec-SC

    Chlorophyll is a driver of the physiological function of leaves. Quantifying chlorophyll content can provide information regarding the physiological state of leaves. Chlorophyll tends to decline rapidly when plants are under stress or during leaf senescence (Gitelson & Merzlyak 1994). It is very vital to understand the pattern of the pigment content change if we are to understand ...


    By PP Systems

  • Analysis of gamma ray incoherent scattering for non-destructive testing

    An approach for the analysis of gamma ray incoherent scattering on free and binding electrons is presented for Non-destructive Testing (NDT). The method is based on computational simulation and backscattering gamma ray measurements for carbon steel walls. The results of thickness measurements for steel walls are described by the theory of the energy transfer model.Keywords: gamma ray incoherent ...


    By Inderscience Publishers

  • Survey of Currently Available Non-Incineration PCB Destruction Technologies

    This publication 'Survey of Currently Available Non-Incineration PCB Destruction Technologies is intended to serve as a guide to available PCB destruction technologies other than incineration. The publication responds to requests for information on, and to continuing interest in alternatives to incineration. The Survey identifies more than 20 vendors who represent that they can treat and destroy ...


  • Non-destructive analysis of concrete for corrosion studies using nuclear technique

    Chloride-induced reinforcement corrosion is the principal cause of deterioration of concrete structures in the Arabian Gulf and the world over. Preventive measures against corrosion require maintaining the chloride and sulphate concentration in concrete below the threshold limits specified by the standards. This requires monitoring the chloride and sulphate concentration in concrete, and a ...


    By Inderscience Publishers

  • Fibre optic sensors as a non–destructive tool for structural monitoring

    Structural monitoring is a diagnostic tool for detection of defects/damages and for scheduling maintenance operations. It is essential to determine the safety of the structures by Non–Destructive Testing (NDT) for evaluation of strength/integrity. This assessment is required for the repair, rehabilitation and life extension of the structure. Fibre Optic Sensors (FOS) are attractive sensing ...


    By Inderscience Publishers

  • How conditions affect cookies and air pollution control solutions

    Chocolate chip cookies are one of my favorite treats. Butter, sugar, eggs, flour, vanilla, and, of course, chocolate chips. Combine the ingredients together and you get a delicious cookie. Somehow, using the same ingredients the cookies do not always turn out the same. Sometimes they are thinner and crispier. Other times, they are soft and chewy. After watching cooking shows, I have come to ...

  • Modeling for NAAQS Part 1: How to select the appropriate output for NO2

    The U.S. National Ambient Air Quality Standards (NAAQS) for 1-hour SO2, 1-hour NO2, and 24-hour PM2.5 use a very particular format. It is very important for all modelers (both within and outside of the U.S.) to understand how AERMOD handles this. In particular, U.S. users need to be familiar with the ...

  • Customer Testimonial: BE&K Building Group for US Pharmaceutical Install

    At Catalytic Products International (CPI), each project we work with is different. Regardless of the differences, we use our experience and expertise to work with all our end users and their engineering / construction / environmental partners to ensure they are addressing their air pollution control needs as efficiently and cost-effectively as possible. We want to share those stories through ...

  • Human Error Threatens Safety in Hazardous Areas

    The top 5 problems identified in hazardous areas are Poor or no maintenance on flameproof (Ex d) enclosures. Due to corrosion—especially when equipment is installed outdoors—the Ex d protection is gone 2-3 years after installation. Incorrectly installed Ex d cable glands. Even if the combination of cable and gland is chosen correctly, the instructions on how to ...


    By Mettler - Toledo Int. Inc

  • Detect Leaks and Analyze Water Consumption with WaterSignal

    Did you know it will cost an estimated $1 trillion over the next 25 years to upgrade the nation’s water system to run more efficiently? While part of the problem is fragile, hundred-year-old water mains, it also falls on property owners to ensure they are doing their part to save water — for both the environment and their wallets. But how? ...


    By WaterSignal

  • Focus on Microfiltration Part 3: Extending Service Life Using Prefiltration

    Last month we examined filter selection strategies for maximizing service life in continuous use applications.  In this 3rd installment, we will examine the use of prefilters to extend service life. Clarifying liquids with high levels of suspended solids is challenging, especially for applications requiring submicron filtration.  In these applications, filter users who experience ...


    By Sterlitech Corporation

  • Using FTIR spectroscopy to measure hydrocarbon pollution in water

    According to the World Health Organization (WHO) and UNICEF’s 2015 Progress on Sanitation and Drinking Water report almost 700 million people around the world don’t have access to clean drinking water [1]. Poor water quality is beginning to return to the developed world too. The strain of population growth, intensified agricultural practices and continued industrial expansion have are ...


    By Specac Limited

  • Methods of Purification by Water Innovations, Inc.

    Carbon Filtration is used for several reasons. Its primary purpose is the reduction of chlorine to less than 0.1 ppm. Chorine can damage softener resins, reverse osmosis membranes, and mixed bed deionization resins. Activated carbon will also help control tastes and odors, provide organic and hazardous organic chemical reduction, and some particulate reduction. ...


    By Water Innovations, Inc

  • Fuel terminal upgrade installs advanced valve actuation and control - Case Study

    Sector: Oil & Gas Category: Control Networks, Electric Actuators, Fluid Power Actuators, Services Products: CP, Extended Scope, Field Service, IQ3 Range, Pakscan Overview Independent tank storage provider Vopak is increasing and enhancing fuel capacity at the Vopak Terminal Durban in South ...


    By Rotork

  • How Installing Arsenic Drinking Water Treatment Can Save Your Life

    Arsenic is an element so associated with its toxicity and harmful effects on the human body that the word itself is often used for any kind of general poison. While the exact ways that exposure to the metalloid attacks various organs and systems is still not fully understood, studies throughout the scientific community are continually determining that ingesting arsenic through drinking water can ...

  • The benefits of monitoring compressed air

    Compressed air is used in many manufacturing processes for many different reasons, from the actuation and control of pneumatic valves and cylinders to the operation of process machinery and tooling. It can also be used as a transport medium for bulk materials or as a purge gas. For all its uses it is nonetheless expensive. This is why, through detailed monitoring, a business can enjoy the ...


    By Contrec Europe Limited

  • Data Centre CRAC unit efficiency improvements

    One of the main types of project Munters look at is energy efficiency improvements within the thermal management side. One of the easiest changes that can be made is swapping out the old AC powered motors for EC powered impellors. the reductions in energy is considerable, with some older belt drive unit changes measuring a saving of over 60% this is due to the design of the new impellors and the ...


    By Munters

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you