non-recycled plastic Articles

  • Waste materials are an underused resource the construction of Europe`s roads

    Recycled waste material could play a major role in the construction of roads in Europe, bringing both environmental and economic benefits. A new study proposes a scenario where 50% of the asphalt for Europe's roads consists of recycled materials, leading to significant reductions in costs, energy use and greenhouse gas emissions. According to the European Waste Framework Directive, there is a ...


    By European Commission

  • NEC Classifications and Divisions for Hazardous Locations

    Electrical equipment in hazardous (classified) locations present a serious threat for workers due to the existence of explosive dust and vapors. Examples of such facilities range from grain mills and gasoline stations to aircraft hangars and chemical manufacturing plants. To prevent devastating explosions that may occur from the ignition of combustible particles in the atmosphere, the National ...


    By Larson Electronics LLC

  • What`s Hiding in Your Waste Piles?

    In over 25 years in the grinding and recycling industry, we’ve learned that there’s always more than meets the eye in a pile of waste materials. Whether it’s a pile of pallets or household garbage, there’s some good and some bad hiding under the surface. It's there if you know how to find it. You can find it with the right industry knowledge, the right equipment, ...


    By Rotochopper, Inc.

  • Ferrous Wear Metal Measurement Made Easy with the FerroCheck

    Historically, one of the most cost-effective indicators of machinery health has been the analysis of ferrous debris in oil. Such analysis utilizes the ferromagnetic properties of generated debris to perform the analysis. Since nearly all wear debris contains ferrous material (in particular iron), an abnormal increase in the amount of debris can be directly correlated to abnormal machinery ...


    By Spectro Scientific

  • Plastic Products – Designed for Recycling?

    When it comes to the UK’s approach to plastics recycling, local authorities, waste management firms and members of the public often come under fire. But to what extent would greater product design considerations enable further progress to be made, considers Chris Oldfield? A recent study conducted by recycling association Recoup¹, found that plastic is the material consumers are most ...


    By UNTHA UK LTD

  • Plastic Recycling Facts

    Plastic recycling is the process of recovering scrap or waste plastics and reprocessing the material into useful productsAccording to the Beverage Marketing Corp, the average American consumed 1.6 gallons of bottled water in 1976. In 2006, that number jumped to 28.3 gallons. Below list some ...


    By Harden Industries Ltd.

  • FLOTTWEG SORTICANTER® for Plastic recycling

    How many times each day do you use something made out of plastic? From a toothbrush to a soda pop bottle, from a grocery bag to a garden hose, plastics are part of our daily life. Needless to mention the huge amount of waste plastics generated in the industry. You probably know that plastics are made from petroleum, a non-renewable resource. When plastics are thrown away, they become part of the ...


    By Flottweg SE

  • Blazing the plastics recycling trail

    In the past year, MBA Polymers has opened two facilities showcasing its high-tech recycling process for plastics from end-of-life durable goods. Those plants, in China and Austria, are just the beginning for this plastics recycling pioneer; over the next two years, the company is hoping to announce at least one additional facility in Europe as well as the development of another operation in Asia. ...


    By Recycling International

  • Plastic Recycling Process

    Plastic recycling is the process of recovering scrap or waste plastics and reprocessing the material into useful products, sometimes completely different in form from their ...


    By Harden Industries Ltd.

  • Recycling plastics with magnets

    (from Machine Desgin)   Many plastics manufacturers use processes like sequential 3D blow-in molding and two-shot injection molding, but they create a ...


    By Eriez Magnetics Europe Ltd

  • Demonstration of Recycled Plastic Lumber in Structures

    One of the first demonstration projects undertaken to explore the uses of Recycled Plastic Lumber (RPL) in structures was conducted by the U.S. Department of Energy (DOE) and ODNR at Battelle-Columbus. This project was a feasibility study for investigating if RPL pallets could successfully be used at DOE field sites. A second project demonstrates the performance of RPL in structures subject to ...


  • Recycling of Pre-consumer Plastic Film

    Untitled Document ...


    By Shred-Tech Corp.

  • Plastic Recycling Industry - Case Study

    Introduction Bottle Recycling has been on the uprise for a number of decades. As the global community becomes more aware of the practices and benefits of reuse and recycling of plastics, they are also demanding that better controls be put in place by the manufacturers, corporations, environmental agencies and end users. This promotes these groups to look toward new technologies that are ...


    By Clean Water Technology, Inc.

  • Recycle plastic HDPE Crate Moulds

    According the appliance, usually we classify the plastic crate into following: Industry large plastic crates/box/container moulds Agriculture plastic crates moulds for vegetables,fruits, fish... Plastic ...


    By Focare Mould Co.,Ltd.

  • Milestone moments in plastics recycling history

    Two separate statistical analyses, one published in Europe and the other in the USA, serve to underline the dynamic and international nature of the plastics recycling sector. Both focusing on developments in 2006, the reports reveal significant increases in the collection of post-consumer plastics on both sides of the Atlantic, as well as unabated export ...


    By Recycling International

  • Facilitating The Healthcare Plastics Recycling Council

    Challenge: The Healthcare Plastics Recycling Council (HPRC) represents a technical consortium of medical product company manufacturers, waste collectors and recycling companies working to enable recycling of select packaging waste materials within hospital and medical facilities. Founded by Antea®Group in 2011, the objective of the HPRC is to enable packaging reduction and/or ...


    By Antea Group - USA

  • IdentiPlast’s positive outlook for plastics recycling

    Opening the IdentiPlast conference on a positive note, PlasticsEurope’s Executive Director Wilfried Haensel stressed that the current debate on climate change presented a chance for the plastics industry to demonstrate how its products contribute to the efficient use of resources. ‘The plastics industry has the opportunity to play a leading role in providing resource solutions,’ he said in ...


    By Recycling International

  • Plastic Pallets features and advantage

    Plastic Pallets are prefereable by people these days because it is more economical than wood pallets and with good apperance, safety and racticability. Plastic Pallets are applicated widely industry: Plastic Pallets for food industry,Plastic Pallets for medicine industry,Plastic Pallets for printing industry,Plastic Pallets for beer industry,Plastic Pallets for printing ...


    By Focare Mould Co.,Ltd.

  • Plastic Waste Management in India

    Plastic waste is recycled in India in an “unorganized” way. 60% of the plastic-waste collected and segregated gets recycled back into materials for further processing into consumer products, while the balance is left unutilized. Regulations and legislations are being enforced in two States of India viz. Haryana and Himachal pradesh, while a National Plastic Waste Management Council Task Force has ...


  • Recycled Plastic Lumber: From Park Benches to Bridges

    The first applications of plastic lumber products were in non-structural applications such as picnic tables and benches. As the industry has matured through the years, innovative research and development work by the plastic lumber industry and universities has fostered the development of superior performing products which in turn has begun to establish new and demanding structural applications ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you