non-woven filter media fabric Articles

  • Solid / gas separation with fabric filters

    A myriad of filter media are utilized today for separation of particulate matter in industrial gas filtration applications. These media range from single use (deposable) to semi-permanent media and include fiber, fabric, ceramic, membrane, metal mesh, and sintered metal media. Semi-permanent media are usually cleanable, either on or off-line, and are primarily intended for long-term (up to ...

  • To prevent blinding in dust collection systems, consider filter type, filter size and selection of the filter media used

    All dust collection systems, regardless of size, share a common problem—dust blinding. Simply stated, blinding is defined as when dust particles plug the holes in a filter and stop the flow of air through the filter, resulting in the dust collector performing poorly. All types of collectors, whether stand-alone units, cyclones or full-scale baghouses, are subject to blinding. To better ...


    By American Fabric Filter Co

  • Removing Solids with Automatic Self-Cleaning Filters

    Introduction The “art” of filtration utilizes many methods for separating solid particles from fluids. There is often no right or wrong method. Water quality and customer requirements usually determine the “best” method for each unique situation. Ridged screens, pleated cartridges, string wound cartridges, melt blown cartridges, woven fabrics, non woven fabrics, sintered metals, granular ...

  • Improve performance by installing a larger filter bag

    YOU MIGHT NOT NEED a more powerful dust collector after all. That’s the word from woodworkers who’ve replaced the original equipment filterbags on their collectors with bags that are more efficient. You might ask, “What can be more efficient than the 1 micron bag that came with my collector?” The answer is a 1 micron bag that’s properly sized for your machine and ...


    By American Fabric Filter Co

  • Evaluation of dynamic membrane formation and filtration models at constant pressure in a combined coagulation/dynamic membrane process in treating polluted river water

    In this study, a dynamic membrane (DM) was formed by flocs produced by river water pollutants reacting with polyaluminum chloride (PAC). The DM was used to separate the flocs from the mixed liquor at constant pressure. Two support media for the DM were tested: non-woven fabric filter and dacron mesh. The formation time of the DM was determined according to the critical flux. The formation ...


    By IWA Publishing

  • Fundamentals and Advantages of Screen Filtration

    The “art” of filtration utilizes many methods for separating solid particles from fluids. There is often no right or wrong method. Water quality and customer requirements usually determine the “best” method for each unique situation. Ridged screens, pleated cartridges, string wound cartridges, melt blown cartridges, woven fabrics, non woven fabrics, sintered metals, granular media, frizzy balls ...

  • Efficient Removal of Organic and Inorganic Suspended Solids

    ABSTRACT The Romans used sand as a filter media to treat their drinking water 2000 years ago. Centuries ago water was poured through layers of cloth to remove visible impurities in drinking water with fabric bags and paper cartridges soon following. Darcy employed sand beds in Dijon, France over 200 years ago to conduct his experiments for developing his famous equation to describe fluid flow ...

  • OM-1 Oil Mist Eliminators Collect Coolant Mists, Lubricant Mists, Smoke

    A major midwest metalworking facility uses 24 OM-1 Mist Eliminators to collect oil mists from over 200 sources, including grinding, dressing, CNC machining, lathes and heat treating operations.  OM-1's ability to accommodate smoke gives it an advantage over centrifugal-type oil mist collectors, which are not usable for smoke. Both soluble and non-soluble oils are used;  OM-1 collects ...


    By Tri-Mer Corporation

  • Methods of Purification

    Water Innovations Water Systems Carbon Filtration is used for several reasons. Its primary purpose is the reduction of chlorine to less than 0.1 ppm. Chorine can damage softener resins, reverse osmosis membranes, and mixed bed deionization resins. Activated carbon will also help control tastes and odors, provide organic and hazardous organic chemical ...


    By Water Innovations, Inc

  • Project profile - USEPA Arsenic demonstration project Stewart, Minnesota arsenic and iron treatment system

    Background AdEdge Technologies Inc. (AdEdge) was selected in 2004 by the U.S. EPA as part of the Round 2 Arsenic Demonstration Program to implement full scale arsenic treatment for the city of Stewart, Minnesota. This public water system serves a community of approximately 600 people with average daily demand of 60,000 gallons per day. AdEdge was selected from the proposed alternatives by ...

  • Compost in the mix for storm water management

    Bioretention areas, also known as rain gardens, are increasingly being used to capture and treat storm water runoff from impervious surfaces such as roofs, sidewalks and parking lots. These landscaped areas often feature native plants installed in an engineered soil mixture that includes compost. “Bioretention areas or rain gardens are an attractive storm water Best Management Practice (BMP) ...


    By BioCycle Magazine

  • Introduction to Decentralized Packaged Wastewater Treatment (PWWT) Systems - PDH Article

    Learning Objectives After reading this article, you should understand: Functions and processes of a decentralized PWWT system; Design considerations of a PWWT system. Overview "Clean water will be the oil of the 21st Century." The accuracy and magnitude of this statement is resonating worldwide. ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you