nox control Articles

  • NOx Control on a Budget

    National, regional and local regulations to reduce NOx emissions have prompted the development and implementation of a number of NOx control technologies – from selective catalytic reduction and low-NOx burners to overfire air and flue gas recirculation. Induced flue gas recirculation (IFGR), a design derivative of conventional forced flue gas recirculation, has demonstrated NOx reductions as ...

  • Theory of Cost Effective NOx Control

    NOx is one of the primary air pollutants emitted from combustion processes and environmental regulations are the only driver forcing industry to install NOx control systems. In the Houston Galveston area alone, there is over 6,000 point sources that would need to be controlled to comply with the new State Implementation Plan adopted by the TNRCC. Many in the industry are in the process of ...

  • CFD Analysis for NOx-Control in a Refinery

    Refineries are required by law to reduce the emission of nitrous oxides (NOX) to the atmosphere. Spray nozzles are key components in the gas conditioning equipment used to control the humidity and temperature of the gases, providing controlled volumes of liquid with predictable drop size and consistent spray coverage. Knowing these values is vital for the optimization of gas conditioning ...


    By Spraying Systems Co.

  • NOx Scrubbing Technology Breakthrough

    Pacific Rim Design and Development and Dupont are proud to introduce a technology breakthrough in the treatment and safe elimination of problematic nitric oxide (NO) and nitrogen dioxide (NO2 ).  There are six forms of nitrogen oxide (NOx); the drawings to the right show the two most problematic forms.  These two are of particular interest because they are identified as atmospheric ...


  • Layered Reduction Technologies for Effective NOx Control

    The control of nitrogen oxides (NOx) is a well-known requirement for utility and industrial furnaces alike.  Although the regulations and corresponding emission limits vary greatly, the need for substantial reduction is becoming universal.  There are a few existing NOx reduction technologies which have been proven effective in a variety of applications.  The most appropriate ...


    By Fuel Tech, Inc.

  • Cost-Effective NOx Control for Air-Preheated Systems

    New advancements in combustion control technologies, such as flue gas recirculation (FGR) and low NOx burners (LNB), have made it possible to achieve ultra low NOx levels without using expensive post-combustion flue gas clean-up technology. For some natural draft units it may be possible to meet the most stringent of the NOx regulations with cost-effective combustion control technologies. For ...

  • The Chemical Aspect of NOx Scrubbing

    With the passage of the 1990 Clean Air Act Amendments, many chemical and metal industries and utility producers will now be required to further limit the amount of NOx (Nitrogen Oxides) produced. NOx is a precursor to ozone in the atmosphere, and is believed to be a major contributor to acidic deposition (acid rain). Formation of ozone: NOx is produced in a variety of ...


    By CR Clean Air Group, LLC

  • Trading NOx in the North-east USA

    Controlling ozone raises thorny issues. Daniel Chartier examines the US ‘cap and trade’ approach to the problem. The problem of ozone in the Northeastern US has been a persistent one. Throughout the North-eastern and Mid-Atlantic US the federal National Ambient Air Quality Standard (NAAQS) for ground level ozone is exceeded repeatedly each summer.  Despite attempts to deal with the ozone ...

  • NOx in Non-Utility Industries - Part II - Control options and monitoring methodology

     This the second in a two-part series. Part I, which appeared in our June 2001 issue focuses on air emission origins of nitrogen oxides (NOx) in non-utility industries. Choice of the NOx control technology is dependent on many factors, including regulatory requirements, technical feasibility, cost and public perception. Figure 1, compiled based on publications [1-5], presents a summary of ...


  • Advanced SNCR - NOx Reduction on Large Utility Boilers

    Fuel Tech has recently completed full-scale demonstrations of Advanced Selective NonCatalytic Reduction systems on a number of large utility boilers (>600MW) firing a variety of fuel types. The systems use the latest flexible injection technology and are controlled with a balanced algorithm utilizing unit load, a full grid of continuous furnace temperatures and the plant continuous emissions ...


    By Fuel Tech, Inc.

  • Nadph oxidases nox-1 and nox-2 require the regulatory subunit nor-1 to control cell differentiation and growth in neurospora crassa

    We have proposed that reactive oxygen species (ROS) play essential roles in cell differentiation. Enzymes belonging to the NADPH oxidase (NOX) family produce superoxide in a regulated manner. We have identified three distinct NOX subfamilies in the fungal kingdom and have shown that NoxA is required for sexual cell differentiation in Aspergillus ...

  • Tri-NOx Multi-Chem Wet Scrubber. Case Study of Our NOx Scrubber in an Automotive Manufacturing Plant

    Toyota Auto Body of California, Inc. (TABC) manufactures 170,000 truck beds per year at its Long Beach, CA facility. The company also makes catalytic converters, and generates NOx at several points within that process. A Tri-NOx scrubber has controlled those emissions with exceptional efficiency since its installation in 1988 To accommodate increased demand, the plant sought Tri-Mer's assistance ...


    By Tri-Mer Corporation

  • Case No : 601: Reducing NOx emissions from Nirtic Acid Manufacturing Plants with NOx Abatement or NSCR

    NOx Abatement is a Non-Selective Catalytic Reduction (NSCR) technology that has a long and proven track record for controlling NOx emissions from nitric acid manufacturing plants. It can be used to alter the NO to NO2 balance (decolourization) or to eliminate NOx through catalytic reaction with a fuel as a reductant. ...

  • Tri-NOx Multi-Chem Wet Scrubber. Case Study of Our NOx Scrubber in a Plastics Resin Plant.

    As part of a commitment to reduce airborne emissions – or even the threat of such emissions – the Mt. Vernon, IN plant of GE Plastics has installed a NOx scrubber. When such GE Plastics products as Ultem resins are produced, nitric acid is used, and emissions from this step are tightly controlled. But to address upset conditions, the company opted to install an emergency scrubber that can treat ...


    By Tri-Mer Corporation

  • NOx in Non-Utility Industries - Part I NOx in Non-Utility Industries - Part I - Air emission origins, best control solutions and monitoring methodology for nitrogen oxides

     Problems with reducing nitrogen oxides (NOx) are widespread in the general process industries. These industries, together with medium size utility and power generators contribute about 15 percent of global NOx emissions. The emission sources addressed include various heaters employed in chemical and petrochemical plants, nitric and sulfuric acid plants, glass furnaces, iron and steel mills, ...


  • NOx formation by steam injection using detailed chemical kinetics

    In order to improve thermal efficiency of gas turbine system and better control NOx emission, the injection of steam into a gas turbine combustor has been employed. This study has used both chemical equilibrium calculations and the counterflow diffusion flame calculations of methane-air flame aiming at the elucidation of the NOx reduction mechanism due to the steam injection. The influence of the ...


    By Inderscience Publishers

  • LATEST TECHNOLOGY: Low NOx PAINT BOOTH & INDUSTRIAL OXIDIZERS with Heat Recovery

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • Technology Spotlight: BIONOxSOLVER NOx: An Eco-Friendly Scubbing Solution

    NOx scrubber installations employing Bionomic Industries' BIONOxSOLVER have proven to be simpler, safer and considerably more cost effective than systems using sodium sulfide or hydrosulfide scrubbing reagents. Sodium sulfide and hydrosulfide are DOT libeled hazardous compounds that require dealing with major worker safety issues. They are extremely corrosive, causing difficulties in safe ...


    By Bionomic Industries Inc.

  • NOx re-burn simulation in a double-jet counter-flow flame

    The paper investigates the main features of NOx emission in a laminar double-jet counter-flow diffusion flame for later use as a possible physical model for NOx reduction through turbine in situ reheat. The oxidizer stream consists of exhaust gas resulted from a conventional combustor and the fuel stream is represented by an air?methane mixture. The main interest rests on the distribution of NOx ...


    By Inderscience Publishers

  • Exhaust Gas Treatments for NOx Reduction to Add to Global Warming

    The enforcement of year 2007 stringent emission norm for reduced NOx reduction/oxides of nitrogen gases from the diesel exhaust and the after treatment to reduce them will add to global warming by several fold according to renowned engine combustion kinetics, emission control process expert and inventor -Mr.Srinivasan Gopalakrishnan, Hydrodrive Systems & Controls Pvt. Ltd, India. His invention ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you