nox recovery system Articles

  • LATEST TECHNOLOGY: Low NOx PAINT BOOTH & INDUSTRIAL OXIDIZERS with Heat Recovery

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • The Chemical Aspect of NOx Scrubbing

    With the passage of the 1990 Clean Air Act Amendments, many chemical and metal industries and utility producers will now be required to further limit the amount of NOx (Nitrogen Oxides) produced. NOx is a precursor to ozone in the atmosphere, and is believed to be a major contributor to acidic deposition (acid rain). Formation of ozone: NOx is produced in a variety of ...


    By CR Clean Air Group, LLC

  • NOx in Non-Utility Industries - Part II - Control options and monitoring methodology

     This the second in a two-part series. Part I, which appeared in our June 2001 issue focuses on air emission origins of nitrogen oxides (NOx) in non-utility industries. Choice of the NOx control technology is dependent on many factors, including regulatory requirements, technical feasibility, cost and public perception. Figure 1, compiled based on publications [1-5], presents a summary of ...


  • NOx in Non-Utility Industries - Part I NOx in Non-Utility Industries - Part I - Air emission origins, best control solutions and monitoring methodology for nitrogen oxides

     Problems with reducing nitrogen oxides (NOx) are widespread in the general process industries. These industries, together with medium size utility and power generators contribute about 15 percent of global NOx emissions. The emission sources addressed include various heaters employed in chemical and petrochemical plants, nitric and sulfuric acid plants, glass furnaces, iron and steel mills, ...


  • LATEST TECHNOLOGY: Small PAINT BOOTH OXIDIZERS with Heat Recovery

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • LATEST TECHNOLOGY: Low Fuel Cost PAINT BOOTH & INDUSTRIAL OXIDIZERS with Heat Recovery

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • Filter technology to meet evolving regulations

    Maguin has developed the Cercat filter for high temperature air pollution control. In this article, David Gambier and Hélène Real outline the technology, as well as installations planned for 2009. Maguin has been present in the waste thermal treatment field since the 1970s. The company’s knowledge has been built through the turnkey supply of thermal treatment units for different kinds of products ...

  • Adwest Technologies flameless retox rto oxidizers with acid gas scrubbers for cost effective voc & odor abatement

    Adwest Technologies, Inc. provides cost effective Flameless Regenerative Thermal Oxidizers (RTO) with acid gas scrubber systems for cost effective VOC and odor abatement from malodorous VOC processes including food processing, rendering, petfood, biopharma spray dryer, bakery oven, composites, foundry, biogas, sludge dryers and waste water treatment plants (WWTP) off gas applications.  ...

  • Gas turbine compliance emissions test case study

    CKwas retained by Lake Road Generating Company, LP (Lake Road) to conduct a compliance emissions test program on three combustion turbine and heat recovery steam generators (CT/HRSG). The purpose of this program is to demonstrate that emissions from the CT/HRSGs are within the emission limits specified in the operating permit issued by the Connecticut Department of Environmental Protection ...


    By CK Environmental, Inc.

  • Nitrogen Oxide Technology Gives American Superconductor an Economical, Environmentally Friendly Treatment Solution

    Untitled Document The installation of Bionomic Industries Inc.'s (Mahwah, NJ) innovative ScrubPac™ BIONOxSOLVER abatement system is enabling American Superconductor ...


    By Bionomic Industries Inc.

  • High-temperature air pollution control technology

    Based on 35 years’ experience working for the environment, French company Maguin has developed the Cercat filter for high temperature air pollution control. David Gambier describes the technology and its potential use in the glassmaking industry.Maguin has been present in the waste thermal treatment field since the 1970s, offering customers innovative and state-of-the-art concepts. The company’s ...

  • Put energy into emission control projects

    Many companies feel pressured to spend the least amount possible to meet environmental regulations, primarily because compliance isn’t a profit generating endeavor. What some environmental and compliance managers fail to realize is that emission control equipment can quickly become a profit decreasing endeavor with this penny wise-pound foolish approach. With mandatory greenhouse gas (GHG) ...

  • Power Industry using Micro-Media Filtration and short-bed ion exchange

    With the demand or higher efficiencies, lower maintenance and operating costs for boilwers and turbines, high-purity water treatment systems are becoming more crucial to the operation of power plants. Modern power plants, operating at supercritical and ultra upercritical boiler pressures and temperatures, require high-purity water that approaches quality levels at the theoretical levels. ...


    By Eco-Tec Inc.

  • Return of the clean air interstate rule—The court does CAIR

    In summer 2008, the U.S. Court of Appeals for the D.C. Circuit issued a dramatic decision to vacate the Clean Air Interstate Rule (CAIR) in its entirety (North Carolina v. EPA, No. 05-1244, D.C. Cir., July 11, 2008). Following a petition for rehearing, it seems the previous vacatur was just a temporary detour, as the Court reinstated CAIR on December 22, 2008. The reinstatement appears to turn ...


    By Trinity Consultants

  • Biotechnology for sustainable hydrometallurgy

    Untitled Document High rate bacterial catalyzed processes can serve to improve hydrometallurgical operations. These solutions are not only ...


    By Paques B.V.

  • The Greening of Carbon Fibre

    Carbon fiber is a material that has, and will continue to revolutionize the products we use every day by making them stronger, lighter and more durable.  Experts estimate that the specialty material is twice as stiff as steel and five times stronger, per unit of weight.   It is made from organic polymers which consist of long strings of molecules held together by carbon atoms.  The ...

  • Case study - Stainless steel RTOs for ethanol emissions and odors

    Overview A 42 million gallon expansion at an ethanol production plant in Nebraska was certain to put the dry mill out of emission compliance for Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs), carbon monoxide (CO), nitrogen oxides (NOx), and particulate matter (PM), all regulated by the EPA. Ethanol production facilities in the United States are permitted to operate ...

  • Case study - Increasing oxidizer capacity by 80,000 SCFM

    Overview A recreational products company bought a three year-old manufacturing facility with an existing regenerative thermal oxidizer (RTO) for the production of their outboard engine. They required emission control equipment to manage the volatile organic compounds (VOCs) emitted by the solvents used in the engine painting processes. The company wanted to minimize overall costs by using ...

  • What carbon footprint? Asks Corus

    Problem In case you haven’t heard, our planet is getting warmer. At what rate it is occurring or how much human activity has to do with the increasing temperatures is a heated debate, pardon the pun. One thing we do know for sure…carbon dioxide (CO2) is a contributing factor in global warming and humans are responsible for a large portion of these emissions. If you had asked ...

  • Case study - Coil coater asks...`What carbon footprint?`

    Overview Our planet is getting warmer. At what rate it is occurring or how much human activity has to do with the increasing temperatures is a heated debate. One thing we do know for sure is that Carbon Dioxide (CO2) is a contributing factor in global warming and humans are responsible for a large portion of these emissions. These days, many individuals and businesses alike are trying ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you