occupational health monitoring Articles

  • Case study - New N2O monitor for occupational health and safety

    The new Geotech G200 range of N2O analysers measures N2O at 0-1000ppm or at 0-100 percent with accuracy, speed and ease-of-use.  With options for CO2, O2 and CO, the G200 range can assist anaesthetists and ...


    By Geotech

  • Health monitoring of NPP workers

    The aim of the study is to assess the health status of Kozloduy Nuclear Power Plant personnel in association with their occupational exposure to low doses of ionising radiation (IR) as well as with other factors of their working environment and to determine the probability of the occupational exposure to be a reason for the diagnosed malignant diseases (Probability of Causation – PC). More than ...


    By Inderscience Publishers

  • Application of thermal desorption to occupational exposure monitoring

    Occupational hygiene, in its broadest sense, is the recognition, evaluation and control of health hazards arising from work – a trained hygienist needs to understand a range of subjects from health and safety legislation through to toxicology, hazardous substances, physical agents, exposure assessment and exposure control strategies. To some extent, occupational hygiene is relevant in all ...


    By PerkinElmer, Inc.

  • Human biomonitoring to define occupational exposure and health risks in waste incinerator plants

    A contribution to the research on the relationship between exposure to ambient pollutants and diseases comes from human biomonitoring data collection and interpretation. The 21 biomonitoring studies reviewed are mainly aimed at providing either information on exposure amongst worker subgroups, serving as a reference, or information on the relationship between exposure and toxicity. Attention was ...


    By Inderscience Publishers

  • The Auditory & Non-Auditory Effects of Noise Pollution:An Occupational Health Study

    1. Introduction: The present study was planned as a prospective, longitudinal and panel-type of a study with the documentation of the health effects of noise exposure as its primary objective. Noise as a health hazard has been studied extensively in the last decade and a substantial amount of dose-response information on NIHL and its risk factors has been documented. However most of these studies ...


  • Why instrument hire makes occupational safety sense

    Background Decisions concerning the acquisition of occupational safety monitoring instrumentation are often made by operational staff that may not have visibility of the full financial implications of their choices. The following article will examine the factors affecting these decisions and explain why a strategic decision to hire instrumentation can deliver substantial and wide-ranging ...


    By Ashtead Technology Ltd

  • Beat the Heat: Occupational Exposure to Heat and Hot Environments

    With summer underway, now is the perfect time for organizations to examine their policies and procedures regarding employee heat exposure, especially in light of the recently published document from NIOSH titled, “Occupational Exposure to Heat and Hot Environments”, Publication Number 2016-106. What is the ...


    By Antea Group - USA

  • Occupation-specific screening for future sickness absence: criterion validity of the trucker strain monitor (TSM)

    Background: Monitoring psychological job strain may help occupational physicians to take preventive action at the appropriate time. For this purpose, the 10-item trucker strain monitor (TSM) assessing work-related fatigue and sleeping problems in truck drivers was developed. Objectives: This study examined (1) test–retest reliability, (2) criterion validity of the TSM with respect to future ...


    By Springer

  • Health monitoring of persons occupationally exposed to ionising radiation in Bulgaria

    This paper describes changes in Bulgarian legislation concerning the health monitoring of occupationally exposed individuals to ensure the radiation safety and protection of radiation workers. The expert view on the implementation of health monitoring programmes to different occupational groups and assessment of health risk, including molecular-epidemiological analyses, is given. Special ...


    By Inderscience Publishers

  • Measuring occupational noise levels at the 2014 Glastonbury Festival - Case Study

    Noise measurement specialist Richard Wilson of the The Event Safety Shop, along with a number of colleagues, measured and monitored occupational noise levels at the 2014 Glastonbury Festival to ensure that the noise exposure of festival staff and concession workers was in-line with the Noise at Work Regulations. To carry out the measurements, Richard and his team used the Cirrus  ...


    By Cirrus Research plc

  • UK Health and Safety Laboratory Will Hold Course on Nanotechnology Health and Safety

    On January 27, 2015, the United Kingdom (UK) Health and Safety Laboratory (HSL) will hold a one-day course on “Nanotechnology Health & Safety -- A Practical Approach.”  The course is intended to help participants gain an understanding of the techniques ...


    By Bergeson & Campbell, P.C.

  • Dust monitoring

    Generally, two different approaches are used to measure the amount of dust deposited on a surface; Determination of the soiling of a surface, by a change in its properties; Determination of the quantity of dust deposited, by weight. WHAT IS DUST? Dust is a generic term used to describe fine particles that are suspended in the atmosphere. Dust comes from a wide variety of sources, including soil, ...


    By Queensland Laboratory

  • Air Monitoring Information to Aid in the Assessment of Potential Human Health Risk from an Ongoing Landfill Fire

     Abstract The North Carolina Division of Air Quality (DAQ) was asked by the Occupational and Environmental Epidemiology Section (OEES) of the North Carolina Department of Health and Human Services to provide air monitoring information to aid in the assessment of potential human health risk from an ongoing landfill fire in Dare County. The Air Toxics Analytical Support Team (ATAST) arrived ...


  • NIOSH Announces Sampling Strategy to Help Identify Potential Nanomaterial Exposure in an Occupational Setting

    On November 1, 2016, the National Institute for Occupational Safety and Health (NIOSH) published a blog item entitled “Never fear!  NEAT 2.0 is here! — How to perform nanomaterial exposure assessment in the workplace.”  NIOSH notes that in 2009, it developed and was the first to recommend using the nanoparticle ...


    By Bergeson & Campbell, P.C.

  • Leveraging the Web for Environmental Quality, Health and Safety

    Untitled Document The principles of continual improvement from management systems such as ISO 14001 and Six Sigma are well known. Less clear ...


    By Intelex Technologies Inc.

  • Noise Monitors and Meters

    Sound level meters Description and ApplicationsThe sound level meter is a lightweight instrument for the measurement of sound pressure level (SPL) in decibels. All ANSI-approved meters meet minimum requirements that include an A-weighted network, a slow-response meter characteristic, and a fully graduated scale with measurements ranging from 80 to 130 dBA. The Type II meter is most frequently ...

  • Radiation Monitors and Meters

    Light Description and Applications The light meter is a portable unit designed to measure visible, UV, and near-UV light in the workplace. (The CTC has a UV light meter available through its loan program, ALEP.) The light meter is capable of reading any optical unit of energy or power level if the appropriate detector has been calibrated with the meter. The spectral range of the instrument is ...

  • Wireless monitoring for a safe indoor environment

    This article discusses the benefits of wireless technology for continously monitoring the indoor environment. In striving for the construction of energy efficient and cost-effective buildings, the imperative issue of the buildings Indoor Air Quality (IAQ) is often overlooked. This can often lead to a unhealthy indoor environment and even to conditions such as Sick Building Syndrome (SBS) or other ...


    By PPM Technology

  • Are you using the right monitor for CO2?

    Carbon dioxide, (CO2) detectors are commonly used to protect workers from leaks in fast food establishments and restaurants.  The OSHA, ACGIH and NIOSH CO2 threshold limit value for 8 hours, (TLV) is 5,000 PPM, and the ACGIH and NIOSH short-term exposure level, (STEL) is 30,000 PPM.  Although these agencies established worker exposure levels, they also all state: ...

  • Tiny materials in countless products raise big questions for environment and health

    Nanotechnology opens a universe of possibilities — but also creates a world of unknowns. In recent years, efforts to develop the Next Big Thing — whether in medicine, computer technology, pollution prevention or high-performance materials — have turned to some really, really small things: nanomaterials. Working at the ...


    By Ensia

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you