off-gas Articles

  • Why ‘custom-built’ is often cheaper than off the shelf

    We know that we’ve said it before, but even though we list what we call our ‘standard range’, by far and away most of the incinerators and cremators we manufacture are specially designed and manufactured to match the individual needs of each customer.  Since everyone’s requirements are different, virtually every unit we produce is ‘made to order’ and the ...


    By Todaysure Limited

  • City Of North Bay Uses Condition Assessment On Critical Force Main To Implement Asset Management Plan

    On one hand, it may seem like a waste of capital dollars if you perform a pipeline condition assessment and the final analysis turns up no leaks. Alternatively, you can also look at the no-leak report as a good news validation story, especially when using the information to help establish an asset management ...


    By Pure Technologies

  • Air Emissions/Off-Gas Treatment

    A number of technologies have been widely applied for removal of VOCs from off-gas streams. However, the application of these technologies to off-gases from site remediation may be quite limited. Biofiltration has been widely applied for VOC destruction in Europe and Japan, but it has only recently been used in the United States. Catalytic and thermal oxidation are widely used for the destruction ...

  • Why Are CHP Closing All Over The World?

    Burning of coal nowadays has become a big problem. The main reason for this is a rapid increase of mankind. So, China burns half of coal in the world. Since 2000 the share of coal in world energy production has increased from 25 to 30%, and the Chinese economy is responsible for 82% of this growth. In Beijing, it is customary to use ...


    By Lumex Instruments Group

  • Robust on-line monitoring assay - Case Study

    Alkaline Phosphatase Enzyme Activity Measurement as a Robust on-line Monitoring Assay for Water Quality Assessment. Zina Al-Saar 4th year Intern student Avans University of Applied Science - ATGM Department Joep Appels - Supervisor and Managing Director microLAN on line Bio-monitoring System. ...


    By microLAN B.V.

  • Ammonium, nitrate, and total nitrogen determination in fly ash

    Fly ash is a by-product of the combustion of pulverized coal and is composed of small particles. The composition of the fly ash may vary considerably, however, all fly ashes contain substantial amounts of silicon dioxide (SiO2), aluminum oxide (Al2O3) and calcium oxide (CaO). Nowadays, air pollution control standards require a separation of flue gas before being released to the atmosphere. Fly ...


    By BÜCHI Labortechnik AG

  • New Paper: Atomic layer etching using advanced plasma etch technology

    Scientists at Plasma Technology demonstrate Atomic Layer Etching (ALEt) of Silicon, using advanced technology  and plasma process knowledge. Read the article in JVST by Andy Goodyear and Dr Mike Cooke, Oxford Instruments Atomic layer etching using plasma is a cyclical etching process of gas dosing and surface bombardment that removes material layer ...


    By Oxford Instruments plc

  • Hutchinson Finds a Quick Reliable Fix to Cavitation Damage

    The Hutchinson Kansas Water Plant gets its water from twenty wells. The water is pumped out of the wells and into a reverse osmosis water treatment center to purify and ensure safe drinking water. At that point, a portion of the water is taken off from the main line, run through the reverse osmosis system and then mixed back with the well water.  This is used to lower the total dissolved ...


    By Singer Valve Inc.

  • A Faster and Better FluidScan with Version 5

    Measure water contamination in turbine oils down to 300 ppm The latest version of FluidScan software can detect total water presence as low as 300 ppm in turbine oils.  The method provides an alternative to laboratory tests such as Karl Fischer titration when fast, simple, and reagent-free analysis is needed. In addition to measuring water contamination, the FluidScan ...


    By Spectro Scientific

  • NEC Classifications and Divisions for Hazardous Locations

    Electrical equipment in hazardous (classified) locations present a serious threat for workers due to the existence of explosive dust and vapors. Examples of such facilities range from grain mills and gasoline stations to aircraft hangars and chemical manufacturing plants. To prevent devastating explosions that may occur from the ignition of combustible particles in the atmosphere, the National ...


    By Larson Electronics LLC

  • Life Among The Heavy Metals

    Authors in scientific and applied works interpret the meaning of the concept "heavy metals" in different ways. Today, they include more than 40 chemical elements with an atomic mass of more than 50 atomic units. An important role in the determination of heavy metals is played by the following conditions: their high toxicity in relatively low concentrations, and the ability to bioaccumulation. ...


    By Lumex Instruments Group

  • Rotork IQ3 actuators selected for Brazilian water treatment plant upgrade

    The upgrade at the Rio Manso WTP at Brumadinho in the south east of Brazil involved the building of an additional filter plant, the replacement of obsolete actuators on existing plant and the introduction of a Profibus digital control network. ...


    By Rotork

  • With its High Pressure Pipeline Environment, Rand Water Provided A Perfect Opportunity to Test New Smartball Insertion And Extraction Equipment

    Rand Water is the largest bulk water utility in Africa and one of the largest in the world, providing bulk potable water to more than 23 million people in Gauteng, parts of Mpumalanga, the Free State and North West - an area that stretches over 31,000 square kilometres. Rand Water’s distribution network includes over 3,300 kilometres of large-diameter pipelines. In 2015 ...


    By Pure Technologies

  • The Internet of Water Is Saving Lives While Battling Pollution

    The Problem A condition known as Legionnaires' disease has made headlines after it killed a dozen people in Flint, Michigan in 2014 and 2015 and sickened hundreds in  ...


    By Griswold Water Systems

  • Thermal Oxidiser - Scottish Leather Group - Case Study

    Project Details Customer Name: Scottish Leather Group The Brief:  Scottish Leather were sending 30, 000 tonnes of waste to landfill each year. Turn that waste into heat and steam for processing leather and heating water Location of Installation: Bridge of Weir, ...


    By Process Combustion Ltd

  • UV LEDs making waves with clean water

    Oxford Instruments systems now facilitate water purification technology With World Earth Day last week I’ve decided to make this weeks blog about how new technology is being used to enhance people’s lives in a fundamental way. The UN recognises that clean drinking water is a global issue with over ...


    By Oxford Instruments plc

  • Food Recovery Innovators

    A YEAR ago, ReFED: Rethink Food Waste released its groundbreaking report, “A Roadmap to Reduce Food Waste by 20 Percent” (Roadmap). Integral to the Roadmapare 27 solutions, categorized into Prevention, Recovery and Recycling. ReFED applied four screening criteria to identify the highest priority solutions for its report, including: “Is the solution limited to specific ...


    By BioCycle Magazine

  • Optimizing VOC Combustion - Case Study

    Volatile Organic Compounds (VOCs) are pre-cursors to Ozone pollution and subject to EPA regulations. Thermal and catalytic oxidizers are routinely used to destroy VOC emissions from a variety of industrial sources. ...

  • Ferrous Wear Metal Measurement Made Easy with the FerroCheck

    Historically, one of the most cost-effective indicators of machinery health has been the analysis of ferrous debris in oil. Such analysis utilizes the ferromagnetic properties of generated debris to perform the analysis. Since nearly all wear debris contains ferrous material (in particular iron), an abnormal increase in the amount of debris can be directly correlated to abnormal machinery ...


    By Spectro Scientific

  • Do You Need a Microfiltration or Ultrafiltration Membrane System for Your Plant?

    Determining whether or not an industrial plant needs a microfiltration (MF) and/or ultrafiltration (UF) membrane system isn’t always as straightforward as it seems. While these systems are not essential for every industrial process, when thoughtfully implemented within an intake, process, or waste stream, they can go a long way in improving a facility’s efficiency and/or cutting ...


    By SAMCO Technologies, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you