off-gas monitoring Articles

  • White Paper & Video on FTIR multigas analysis

    Gasmet Technologies has published a free White Paper and a video on the simultaneous measurement of multiple gases in a wide variety of applications using FTIR. Both the video and the White Paper can be found here at www.gasmet.com or by visiting the Quantitech stand 62/63 at AQE 2017. ...


    By Gasmet Technologies Oy

  • Water Treatment Optimization - Case Study

    Drinking water treatment in North America has stringent requirements for effluent water quality, with a great amount of attention being drawn to the presence of hazardous disinfection by-products (DBPs) persisting through water distribution systems. The operation of water treatment plants involves addition of various mixing agents to help with coagulation and settling of organics in the raw water ...


    By MANTECH

  • `Standards are desperately needed for plastic and pesticide contamination in soil´

    In addition to plastic in the oceans, plastic contamination in arable land throughout Europe and other parts of the world is a growing problem. No standards exist for these types of soil pollutants, nor for pesticide residues or their degradation products. For this reason, Professor Violette Geissen is calling for standards to be implemented. On 15 June, Geissen will deliver her inaugural address ...

  • Customer Testimonial: BE&K Building Group for US Pharmaceutical Install

    At Catalytic Products International (CPI), each project we work with is different. Regardless of the differences, we use our experience and expertise to work with all our end users and their engineering / construction / environmental partners to ensure they are addressing their air pollution control needs as efficiently and cost-effectively as possible. We want to share those stories through ...

  • How conditions affect cookies and air pollution control solutions

    Chocolate chip cookies are one of my favorite treats. Butter, sugar, eggs, flour, vanilla, and, of course, chocolate chips. Combine the ingredients together and you get a delicious cookie. Somehow, using the same ingredients the cookies do not always turn out the same. Sometimes they are thinner and crispier. Other times, they are soft and chewy. After watching cooking shows, I have come to ...

  • Titanium Demand on Rise for Additive Manufacturing Printing: How it’s Made? Titanium Plasma Atomization.

    Plasma atomization is used in many applications, including 3D printing. First developed in 1998, this technique has risen to become the industry standard process for creating reactive metal powders suitable for 3D printing. Learn how plasma atomization works and why you need an oxygen monitor to stay safe with plasma atomization.  How Plasma Atomization Works ...

  • Why You Should Consider a Sample Conditioning Unit for Taking Low NOx Measurements When Using a Portable Emissions Analyzer

    Using state-of-the-art technology, we here at E Instruments create high-quality portable industrial combustion gas and emissions analyzers that are capable of taking precise, low NOx measurements for both NO and NO2. In particular, we recommend our sample conditioning unit to those of you who need to take accurate, low NOx or SO2 ...

  • ISO Standard describes aerosol generation for air exposure studies of nano-objects and their aggregates and agglomerates

    The International Organization for Standardization (ISO) recently published standard ISO/TR 19601:2017, “Nanotechnologies — Aerosol generation for air exposure studies of nano-objects and their aggregates and agglomerates (NOAA).”  ISO states that, to evaluate the inhalation toxicity of NOAA, it is important to consider certain ...


    By Bergeson & Campbell, P.C.

  • A quick guide to oil analysis for engine test applications

    Reliability testing is a very important component of new engine development. Engineers need to fully understand and chart the engine lifetime performance under a variety of conditions before mass production may be considered. Many important performance data parameters are collected in real time through the many different types of sensors that are connected to the engine in the test cell and oil ...


    By Spectro Scientific

  • Measuring hydrogen off-gas in nuclear reactor - Case Study

    Nuclear reactor coolant removal monitored by hydrogen measurements provided by Systech's 542 programmable gas analyzers NNC Limited is using Systech's 542 programmable gas analyzers to monitor hydrogen off-gas in test rig for Dounreay Fast Breeder Reactor decommissioning. Decommissioning nuclear reactors is not only a matter ...


    By Systech Instruments Ltd

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...


    By Pollution Srl

  • Off Shore Oil Sheen Detection and Thickness Monitoring

    This technical note discusses some of the key offshore applications for oil-on-water monitoring and thickness detection. Leakwise systems have over 18 years of experience supplying reliable monitoring to major petroleum and power companies in offshore and onshore applications. Designed for Marine Applications The Leakwise ID-227 wired and ID-227WL wireless systems ...


    By GE Analytical Instruments

  • Landfill Gas Monitoring Procedures

     Purpose of Document The purpose of this document is to provide standardized procedures for California Integrated Waste Management Board (Board) inspectors to use when performing landfill gas (LFG) monitoring during routine disposal site inspections. The standardization of procedures is intended to produce an acceptable level of confidence in the monitoring. This document presumes that each ...


  • Gas Detection and Monitoring Systems

    In greenhouse applications, the accurate measurement of a number of environmental parameters such as carbon dioxide concentration, temperature, light intensity, water, humidity, pH and nutrient levels using sophisticated sensors is used to create a controlled environment for optimising plant growth rates while minimising energy usage. Carbon dioxide concentration is also one of the best ...


    By Edinburgh Instruments Ltd

  • Biofuels Gas Monitoring

    The Customer The Company is one of the world’s leading developers and producers of advanced fuels and green chemicals. The Process The Company uses a gasification process that breaks down wood chips, waste and other feedstock using plasma technology. The process produces a uniform synthetic gas (syngas) that is used to power their turbine engines. ...

  • The latest ground Gas monitoring innovations

    The latest Ground Gas monitoring innovations   The traditional methodology for ground gas monitoring has been ‘spot monitoring’ – taking event readings at various set times to predict the sub surface gas regime on both on Brownfield and Landfill sites.     This methodology is in general current practice under both the EU Landfill Directive ...


    By Shawcity Limited

  • When is a Nitrogen Monitor Not a Nitrogen Monitor?

    No matter what industry you work in, whether it be diving, agriculture, academia, aerospace or catering you will no doubt have your own industry specific language. My favourite take on this is this ...


    By Analox Sensor Technology

  • Monitoring flammable gas in boiler houses

    The most common fuels in use for space and water heating are Oil, Natural Gas and Liquid Petroleum Gas (LPG). By far the most popular, clean and cost effective solutions are utilising Natural Gas or LPG. The traditional safety measure derived from the time of oil fired boiler houses is the use of a fusible link placed above the each boiler. The fusible link is intended to melt if it becomes ...

  • Green House Gas Flow Monitoring

    This article addresses the challenges and solutions to flow measurement of green house gases in various industry applications.  GHG flow monitoring regulations are discussed and addressed. Last year the EPA implemented new regulations entitled “Mandatory Reporting of Greenhouse Gases.” The new regulations called for certain facilities emitting 25,000 metric tons or more per year ...

  • FTIR gas monitor for diverse applications

    QUANTITECH, a leading supplier of environmental monitoring instrumentation, has recently supplied EURO Environmental Services in Ireland with a transportable Gasmet FTIR multiparameter gas analyser which EURO Environmental's Managing Director Geoff Fitzpatrick says, “is proving invaluable in many varied applications across a broad selection of industries.” With headquarters in Drogheda in Ireland ...


    By Quantitech Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you