oil analyzer Articles

  • Introducing LaserGas III SP CO – a combustion analyzer for rough environments

    NEO Monitors unveils the industry’s most compact CO combustion analyzer suitable for the most demanding environments. LaserGas III CO includes measurement of CH4, H2O and temperature in one single unit designed to reduce risk. Based on decades of experience and customer feedback, NEO Monitors has designed an Ex-d certified tunable diode laser (TDLS) analyzer. The instrument is ...


    By NEO Monitors AS

  • Comply with Highly Regulated Oil in Water Measurements Using Portable Infrared Analyzers

    The Petroleum Industry – both offshore and onshore -- has regulations that limit the amount of oil in discharged water.  Fixed filter infrared (IR) analyzers have been used to test oil levels in produced water on drilling platforms for over 45 years for a number of reasons. On oil rigs where real estate is at a premium, infrared analyzers such as the Wilks InfraCal TOG/TPH ...


    By Spectro Scientific

  • Request from the Laboratory in an Oil Refinery to Testing and Analyzing Equipment Manufacturers

    Oil refineries are always required, as social duties, to strictly ensure "safety" and appropriately manage "environment, health and quality" and "stable supply" and, as economic duties, to seek and manage "productivity." The mission of the laboratory of the oil refinery is to support good management, and it is essential for the laboratory to select and manage appropriate testing and analyzing ...


    By HORIBA Europe GmbH

  • Oil Recovery

    Industrial Wastewater Treatment Success Stories Oil Water Emulsion Wastewater Treatment Industry Oil Recovery - Improved Efficiencies A refinery was having several upsets in their ...


    By Integrated Engineers Inc.

  • Sulfur Compounds Analyzer MEXA-1170SX

    The MEXA-1170SX is a continuous gas analyzer for sulfur compounds existing in engine emissions. It can measure SO2 concentration and the amount of total reduced sulfur compounds (TRS), such as H2S, separately. It can also measure the total sulfur compounds (TS) that contains both gaseous compounds and liquid compounds in PM, such as SO3. By utilizing ultra-violet fluorescence (UVF) method and ...


    By HORIBA Europe GmbH

  • ANALYZES OF THE USED FRIED OIL UNDER ENVIRONMENTAL PERSPECTIVE AND ITS POSSIBILITIES FOR PRODUCTION OF BIODIESEL

    At the moment, questions concerning the environment degradation and the sustainable development are highly argued, but Brazilian companies' efforts for the reduction and elimination of inconsequential effects caused by its products are still presented in incipient numbers. Amongst the products that can generate negative effects to environment and are generated daily and in large amount, it can be ...


  • Portable Infrared Analyzers Provide On-Site Measurement of Oil and Grease Levels in Hydraulic Fracturing Water

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well.  Whether the water is going to be taken off-site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water.  Waiting for remote laboratory results to determine the oil level can take several ...


    By Spectro Scientific

  • Comply with Permit Levels for Fats, Oil and Grease in Wastewater using Portable IR Analyzers

    Wilks InfraCal TOG/TPH Analyzers provide accurate, on-site analysis to help regulators and industry reduce the discharge of fats, oil and grease in wastewater.  On-site testing with the portable mid-IR InfraCal Analyzer gives results in 10 minutes and eliminates the wait for off-site lab results.  It is simple enough for an operator with minimal training to do the analysis. Stricter ...


    By Spectro Scientific

  • GE Leakwise Application Notes: Oil Sheen Detection -- An Alternative to On-Line PPM Analyzers

    Introduction Discharge of hydrocarbons in industrial water is restricted by environmental authorities in most countries to a few parts per million (ppm). Environmental authorities currently monitor wastewater, stormwater, and cooling water discharges from ...


    By GE Analytical Instruments

  • Portable IR Analyzers Provide Petroleum & Wastewater Industries with Accurate Oil Content Measurements

    Fixed filter infrared (IR) analyzers have been used to test oil levels in produced water on off-shore and on-shore drilling platforms for well over 45 years. U.S. EPA methods 418.1 and 413.2 were used extensively on a worldwide basis until the Montreal Protocol called for Freon (the solvent used in the analysis) to be phased out. Infrared analysis using tetrachloroethylene (perchloroethylene) is ...


    By Spectro Scientific

  • Research Institute uses GE InnovOx TOC analyzer to evaluate hydraulic fracturing and oil exploration produced water

    Background The Global Petroleum Research Institute (GPRI) at Texas A&M University-College Station regularly conducts laboratory research studies on various oil and gas produced wastewaters with varying sample matrices. The GPRI tests samples at different shale and oil producing formations using a mobile laboratory, which houses a pilot-scale treatment system for identifying the ...


    By GE Analytical Instruments

  • Portable IR Analyzer Provides ASTM Field Test Method for Measuring Soot Levels In Diesel Engine Lubricating Oils

    The InfraCal Soot Meter, from Wilks Enterprise, gives users an approved ASTM testing method for measuring the percent level of soot in diesel engine lubricating oils -- ASTM Method D7686-2011 entitled “Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) instrument.” While there is widespread disagreement on used-diesel ...


    By Spectro Scientific

  • On-site Oil Analysis to extend oil drain intervals

    Fleets demonstrate ROI on do it yourself oil analysis “If the oil is good, why would you change it?” Gary Lentsch, CAFM, fleet manager for Eugene Water & Electric Board (EWEB), asked ...


    By Spectro Scientific

  • Oil in frac water testing

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the wa-ter. Waiting for remote laboratory results can take several days to a week. The InfraCal TOG/TPH ...


    By Spectro Scientific

  • Detection of atrazine in corn oil

    MATRIX: Corn Oil ANALYTE: Atrazine RANGE OF DETECTION: 10 to 500 ppb MATERIALS: Atrazine RaPID Assay, Kit and Sample Diluent. Reagents: acetonitrile (pesticide grade). Equipment: 15 mL polypropylene tubes with screw caps, 15 mL polypropylene centrifuge tubes, serological pipets, test tube rack and pan balance. ...


  • Methods of oil/fuel analysis

    PC GlobeCore can propose you to make a reclaiming test of yours example of fuel (oil) to verify the possibility of clean it. If the oil is contaminated and not suitable for use, filtration can be recommended. Or, you can also make this test by yourself using our laboratory/test-bench transformer oil vacuum regeneration system UVR. The regenerated samples exceeded yours expectations. Average ...


    By GlobeCore GmbH

  • Oil Water Separator Maintenance

    Oil water separators (OWS) can be co$tly to maintain, $20,000 or more on average per cleaning and if not properly managed, can be very expensive conduits of pollution. Have you taken steps to minimize the effects and consequences on your operating co$t? When was your facility’s last OWS maintenance ...

  • Quantifying the concentration of crude oil microdroplets in oil–water preparations

    Dissolved constituents of crude oil, particularly polycyclic aromatic hydrocarbons (PAHs), can contribute substantially to the toxicity of aquatic organisms. Measured aqueous concentrations of high–molecular weight PAHs (e.g., chrysenes, benzo[a]pyrene) as well as long‐chain aliphatic hydrocarbons can exceed the theoretical solubility of these sparingly soluble compounds. This is attributed to ...


    By John Wiley & Sons, Ltd.

  • Solvent-free oil-in-water analysis

    Non-ionic surfactants can homogenize oily, produced water samples, creating optically clear microemulsions that are ideal for fluorescence measurements [1]. The use of surfactants to reduce fouling and improve the performance of on-line, fluorescence-based, oil-in-water monitors has been reported previously [2,3]. This paper describes the use of surfactants to prepare discrete water samples ...

  • Moisture in Oils: The Three-Headed Beast

    Abstract Moisture contamination in in-service lube oils is perhaps one of the most destructive forms of engine corrosion second only to particle contamination.  Water contamination in oil can be categorized into three forms of water; Free, emulsified, and dissolved.  All forms of water have direct consequences to the oil and gears of the engine, but indirect consequences as ...


    By Arizona Instrument LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you