oil coalescer Articles

  • Series TJ Coalescence-separation Oil Purifier

    Series TJ Coalescence-separation oil purifier adopts advanced polymer fiber as the filter medium combined with the special oil-water separating device to make TJ is good at breaking emulsion and filtering. It can effectively separate water from oil. Series TJ can work online with turbine system for breaking emulsion and filtering, also it can separate particles and mass water from light oil. ...


    By rier oilpurifier company

  • Coalescence and Size Distribution Characteristics of Oil Droplets Attached on Flocs After Coagulation

    Abstract  The coalescence characteristics of oil droplets which are attached on flocs after coagulation is different from coalescence of droplets which are suspended in emulsions. The droplets attached on flocs are stationary and do not collide as those in emulsions. Objectives of this study were to investigate the change in size distribution of oil droplets that were attached on flocs ...


  • Research on the treatment of oily wastewater by coalescence technology

    Recently, oily wastewater treatment has become a hot research topic across the world. Among the common methods for oily wastewater treatment, coalescence is one of the most promising technologies because of its high efficiency, easy operation, smaller land coverage, and lower investment and operational costs. In this research, a new type of ceramic filter material was chosen to investigate the ...


    By IWA Publishing

  • Oil-Water Separator with New Coalescing Media Handles High Load Stormwater at HydroElectric Powerplant to Yield Zero Oil Discharge

    Background Removal of oil from water before the water is discharged into a river or other body of water is an important environmental goal. In order to accomplish this, a major hydropower producer in the southern United States contracted with HydroQuip, Inc.* for the supply of a state of the art oil/water separator. The power plant had several goals, but the most important was that in ...


    By Lantec Products, Inc.

  • Oil droplets and solid particles removal using circular separator with inclined coalescence mediums: comparison between co-current and counter-current flow

    This research investigated the effects of co- and counter-current flow patterns on oil-water-solid separation efficiencies of a circular separator with inclined coalescence mediums. Oil-water-solid separations were tested at different influent concentrations and flowrates. Removal efficiencies increased as influent flowrate decreased, and their correlationship can be represented by power ...


    By IWA Publishing

  • Oil Water Separator Maintenance

    Oil water separators (OWS) can be co$tly to maintain, $20,000 or more on average per cleaning and if not properly managed, can be very expensive conduits of pollution. Have you taken steps to minimize the effects and consequences on your operating co$t? When was your facility’s last OWS maintenance ...

  • Kimre Inc. LIQUI-NOMIX oil-water separators

    Liquid - liquid mixtures of contaminant oils (or organic solvents) in water (or aqueous solvents) can be separated economically and efficiently with gravity settlers or decanters. To achieve high efficiency separations, the settling unit must include a coalescing stage for removal of small droplets of oil. Kimre Inc.'s LIQUI-NOMIX coalescers provide high efficiency polishing of liquid streams and ...


    By Kimre, Inc.

  • Oil Emulsion and cleaning parts wastewater

    Customer The company is the only car manufacturer in Slovakia producing engines. In the Slovak facility, they produce gasoline engines by five production lines, four metal cutting lines and one assembly line. Customer needs Disposal of huge not dischargeable oily waste water is one important issue that the company has set out to exploit. The goal ...

  • Oil Skimmer makes oil/water separator more efficient

    Industrial facilities depend on oil/water separators to separate oil from its waste water. While oil/water separators are a helpful component to a plant's wastewater system, oil/water separators traditionally do not provide an efficient method of removing oil once it has been separated from the waste stream. Traditionally, the separator industry has either used overflow skimmer pipes or weirs, or ...


    By Oil Skimmers, Inc.

  • Freytech oil water separators in car wash applications

    Knowing that oil can get into the reclaim water, David F. Roberts, the President of Freytech Inc., recommends the use of an enhanced coalescing oil water separator. “Even trace amounts of oil in the recycled water can diminish the quality of the wash,” he said. “An ‘oil trap’ is not enough since it is simply a tank with baffled walls which does trap some of the oil ...


    By Freytech Inc.

  • Starndard Batch Treatment of Free and Soluble Oil Wastewater

    Small and Medium metal-based manufacturing plants produce between 1,000 and 30,000 gallons per week of oil-laden wastewater. Typically, the oil load is less then 2,000mg/l as soluble oil. Free (globular) oil is typically removed by DAF, oil-water separator, or coalescer with the remaining soluble oil needing to be reduced to less then 100mg/l in order to discharge directly to the local sewerage ...


  • Industrial container recycling simplified by oil skimmer

    Barrel Reconditioning Industries (BRI) of Cottage Grove, MN builds recycling systems for both metal and plastic containers, including lubricating fluid drums and barrels. A typical BRI system consists of several integrated machines or stations, including a solvent preflush and a high pressure water wash. The water wash presents two distinct problems. First, oil and grease contaminated wash water ...


    By Abanaki Corporation

  • Choosing the right oil skimmer for economical fluid management

    Oil skimmers are simple, dependable and effective tools for removing oil, grease and other hydrocarbuns from water. Although designs var’, ah oil skimmers rely on the fluid properties of specific gravity and surface tension. Most use a moving medium tu remove floating oil from the fluid’s surface, as shown jo Figure 1 (The exception is a floating suction skimmer.) Floating oil and grease cling tu ...


    By Abanaki Corporation

  • Emulsion breakingtechniques for oil in water solvent extractions

    Certain types of samples, such as those containing detergent, may form emulsions when doing an oil in water extraction into a solvent. The boundary between the solvent and the sample will have an emulsion layer that lias a cloudy or milky appearance as shown in tlris photo. According to U.S. EPA Method 1664, "if the emulsion is greater than one-third the volume of the solvent layer. Hie ...


    By Spectro Scientific

  • Emulsion-Breaking Techniques for Accurate Oil in Water Measurements

    A White Paper discusses emulsion-breaking techniques for ensuring accurate oil in water measurements. Certain water samples, such as those containing detergent, may form an emulsion when oil in water extraction into a solvent is done. In order to ensure an accurate measurement, the emulsion must be broken. Six techniques are described that can be used for reducing an emulsion ...


    By Spectro Scientific

  • How do I get that oil out of there?

    It is a common question asked every day by people in all fields of industry. Machine shops, steel mills, industrial manufacturers, and many others are faced with the problem of removing oils from coolants and wastewater on an everyday basis. They are faced with high disposal and maintenance costs. Some manufacturers are charged extreme amounts to have their contaminated water treated properly by ...


    By Abanaki Corporation

  • The Challenge of Removing Surface (free-floating) Oil

    Imagine tackling your greatest production challenge quickly, easily and inexpensively. Now imagine tackling your greatest production challenge quickly, easily and inexpensively – and even generating a profit while doing so. For businesses and industries that deal with oil separation and removal, the solution does not need to be expensive or inefficient. In fact, the answer may be simpler ...


    By Oil Skimmers, Inc.

  • How Do I Get That Oil Out of There?

    It is a common question asked every day by people in all fields of industry. Machine shops, steel mills, industrial manufacturers, and many others are faced with the problem of removing oils from coolants and wastewater on an everyday basis. They are faced with high disposal and maintenance costs. Some manufacturers are charged extreme amounts to have their contaminated water treated properly by ...


    By Abanaki Corporation

  • Monroe`s Multi Stage Oil Mist Collector solves synthetic fiber plant`s oil mist problems

    Challenge A synthetic fiber plant's manufacturing operations produced a large amount of oil mist. The oil mist consisted of heavy oil droplets, smoke, and sub-micron vapors. The manufacturer required the air to be cleaned of the oil mist and other pollutants before discharge into the atmosphere. Solution The plant examined various types of oil mist ...

  • Oil/water separator and oil skimmer companies work together to help power generation facilities

    Power generation facilities depend on oil/water separators to separate oil from its waste water. While oil/water separators are a helpful component to a plant’s wastewater system, oil/water separators traditionally do not provide an efficient method of removing oil once it has been separated from the waste stream. Knowing what his customers were faced with, Dave Goding, president, Mercer ...


    By Oil Skimmers, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you