oil condition sensor Articles

  • Ferrography Made Easy With The FerroCheck 2000

    The measurement and trending of abnormal ferrous wear debris in machinery lubrication oils is arguably the most significant indicator of machinery health and a key predictor of catastrophic machinery failure. There are several methods available to measure the ferrous content of lubrication oil. ...


    By Spectro Scientific

  • Fires at Composting Facilities: Causes and Conditions

    The subject of fires at composting facilities is a bad news/good news situation. The bad news is that fires are more common than we realize. Ask a group of facility operators if they have had to deal with a fire, and the majority will quietly admit they have. The good news is that we don’t realize that fires are fairly common at composting facilities. Most are neither frequent nor destructive ...


    By BioCycle Magazine

  • Environmental Sensors in Waste Management

    Issue: As part of an increasing sentiment among European consumers that environmental protection is important, concern about the impact of landfill is growing. Sensor technology makes it possible to measure and control inputs to landfill sites and pollutants arising from them. However, the exploitation - or uptake - of such technology has been lower than expected in the waste management sector. ...


  • Case study - Public-private partnership successfully tests leakwise early oil spill detection sensor in the tidal Delaware river

    Background In the summer of 2011, the Delaware River Basin Commission (DRBC) and the U.S. Geological Survey (USGS) collaborated with GE Analytical Instruments on a unique test deployment of an oil sheen sensor in the tidal Delaware River. The idea for the test deployment arose during meetings of the Delaware River and Bay Oil Spill Advisory Committee, which includes organizations and ...


    By GE Analytical Instruments

  • Oil on Water Monitoring

    Northern Ireland Water operate a number of potable water plants around Lough Erne and the River Derg, these waterways are extremely popular with tourists and are used for pleasure crafts of various sizes, from jetskis to fully fitted 6 berth cruisers. These watercraft create an ongoing risk of floating oil from poorly maintained engines, as the watercraft have access to within 10 metres of the ...


    By Partech (Electronics) Ltd.

  • Upgrading from Pellistor Gas Sensors to Infrared Technology

    In this article Andy Avenell, Crowcon’s Fixed Systems Product Manager, considers the shift towards infrared (IR) gas sensor technology in the oil and gas industry. Abstract Flammable gases and vapours can present considerable dangers in many industrial applications, none more so than the processes involved in extracting, transporting and processing oil and gas. Fast and reliable ...

  • Efficient Operation of Lighting, Hot Water and Air Conditioning: Hotel Inter Continental Sydney

    To improve its environmental performance and save nearly $300,000 per year, the Hotel Inter Continental Sydney changed some practices that seemed insignificant in themselves but which collectively, wasted massive resources. The changes cost around $275,000 and no adverse affect on guest amenity. They included lowering the power of lights that were too bright, lowering the temperature of ...


  • Controlling Storage Level of Oil Tanks case study

    SmartScan25 provides a reliable and strong solution for level measurement of stored oil in Taiwan's leading fibers manufacturer. Tuntex Distinct Corp. located in Tainan, is Taiwan's leading manufacturer of fiber and spinning for the textile industry. The company's plant is known by its state-of-the-art technology that guarantees top quality fibers and filaments for textiles and garments around ...

  • Off Shore Oil Sheen Detection and Thickness Monitoring

    This technical note discusses some of the key offshore applications for oil-on-water monitoring and thickness detection. Leakwise systems have over 18 years of experience supplying reliable monitoring to major petroleum and power companies in offshore and onshore applications. Designed for Marine Applications The Leakwise ID-227 wired and ID-227WL wireless systems ...


    By GE Analytical Instruments

  • Increasing Safety and Pumping Efficiency in a Crude Oil Refinery

    CAS DataLoggers recently provided the automated data collection and transfer solution for a crude oil refinery which wanted standalone systems to take thermocouple readings in a number of their observation wells. These shafts are connected to the refinery via extensive pipelines for subsequent processing. ...


    By CAS DATALOGGERS

  • Safety Systems Depend on Reliable Field Sensors (Emphasis on Fire and Gas Detectors)

    Abstract Because not all hazards are the same, identifying and quantifying the hazard is the starting point in choosing sensing technology. Not all detectors are the same, and they should be selected according to their ability to detect the hazard. This paper gives a broad summary of technologies that provide users reliable responses to hazardous conditions, that minimise false ...

  • Danger and Detection of Hydrogen Sulphide Gas in Oil and Gas Exploration and Production

    A rig worker smells rotten eggs near the well head, rubs his itchy eyes as he investigates the frosty pipe connections. After a few moments, he believes all is fine as he no longer smells the tell-tale hydrogen sulphide odour. In this scenario, we can only hope the worker recognises the danger and quickly leaves the site. Oil fields, especially mature ones, can produce hydrogen sulphide gas ...

  • Gas detector communication technology for offshore oil and gas platforms

    In few applications is safety as important as on offshore oil and gas platforms. Explosive hazards from hydrocarbon gases and vapours are an ever-present risk, whilst toxic hydrogen sulphide gas and depleted oxygen environments can pose significant risks to personnel. Gas detectors are therefore essential to provide dependable early warning of gas hazards. Gas detectors are permanently installed ...

  • Solving waste oil management and removal problems in power generating plants

    If your plant is like most, it is doing a good job of preventing oily water waste and waste oils from escaping into the environment. But at what cost? As labor resources dwindle, operating and maintaining drainage systems, oil separators, and sometimes inadequate oil removal equipment is expensive. Paying higher than needed costs for waste oil disposal, filtration and water treatment due to these ...


    By Oil Skimmers, Inc.

  • Non-contacting solution for Plugged off flow meters in the oil patch - Case Study

    For years Petrobakken Energy Ltd. used inline turbine flow meters to track the flow rate of oil recycled to treaters. But with a high concentration of wax and sand in the oil, the turbine meters were quickly plugging off. The line had to be shut down at least once a day and the turbine flowmeters disassembled for cleaning. This was troublesome and expensive. Petrobakken knew there had to be a ...


    By Greyline Instruments Inc.

  • Helping veolia transform waste into bio-fuel case study

    LIPODAN, a VEOLIA company, is a plant for recycling grease, food grease and used oil which is collected from restaurants, from gas stations, car garages, bus companies and similar locations. The plant treats 12,000 Tons of organic oils and 6,000 Tons of mineral oil per year. For recycling, the plant is using the LIPOVAL process. The oils are first converted to LIPOFIT, an ...

  • Gill Instruments case study featured in AWE International

    AWE International magazine, which is focused on the environmental analysis industry, recently featured Gill Instruments in a case study about environmental monitoring with solid-state meteorological instruments. The case study includes information about all of the products within the Gill Instruments range, with information about their advantages within the environmental analysis field. We have ...


    By Gill Instruments Limited

  • Case study - SEAWATCH Norway

    DURATION: 1990 onwards DESCRIPTION: SEAWATCH Norway, which is a continuation of SEAWATCH Europe in Norwegian waters, focuses on developing new technologies, special applications and sensors. One of the buoys is specifically reserved for testing new technologies and is located nearby Fugro premises. Users of the services include: ...


    By Fugro OCEANOR AS

  • Pressure transmitters: It’s class that counts

    KELLER would like to do away with DIN standards. The company is backing the introduction of an accuracy class, as it did for pressure gauges. The conditions under which the class is complied with are described in specifications. The new EC standards make it more difficult for companies to manufacture their own transmitter electronics. Changing from OEM transducers to OEM transmitters is ...

  • Ultrasonic Testing For Non Destructive Testing

    Ultrasonic Testing or UT as its known has programs in a wide range of sectors, from aerospace, automobile, to substance, oil, large storage space, and power creation and overseas. UT is aspect of a selection of techniques known as NDT (Non Destructive Testing) methods. Their objective in industry is to allow the examination of parts and equipment ...


    By Non Destructive Testing Lab

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you