oil contamination solution Articles

  • CH#952 - Oil Contaminated Soil

    SITE OWNER: A National Overnight Express Package Company SITE SURVEY: Site and geological surveys revealed a contaminated area north of the facility and west of a diesel tank pit. The cause of the contamination was the result of two (2) underground storage tanks (UST™). One tank contained waste oil while the other contained new oil. Both tanks had ...


    By BIO-SYSTEMS International

  • Seven Ways Your Facility Isn’t Meeting Effluent Regulations and How to Solve Them

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business, especially when it comes to meeting effluent regulations. This is an important part of the wastewater treatment process to consider, as ignoring it could earn your ...


    By SAMCO Technologies, Inc.

  • Characterization and treatability of a contaminated soil from an oil exploration zone

    Abstract: A crude contaminated soil, arising from an oil production zone in Tabasco, Mexico was studied. A sample of about 40 kg was dried and screened through meshes 10-100. Total petroleum hydrocarbons and 6 metals (Cd, Cu, Cr, Ni, V and Zn) were determined to the different portions. For soil which passed mesh 10, six non-ionic, three anionic and one zwitterionic surfactant solutions ...

  • Power plants use oil skimmers to prevent contamination from spills

    Most hydroelectric plants designed in the 1960s were built with a station drainage sump that collects all drainage from the plant. As designed, float switches activate sump pumps that discharge liquids directly into the tailrace. The system cannot distinguish between types of liquids, so in the event of an oil leak, oil in the sump could be released into the tailrace. Modern ...


    By Oil Skimmers, Inc.

  • Innovative Project for Hydrocarbons Contamination

    Baioni Crushing Plants, leader in the aggregate crushing sector has been operating for 40 years, have recently developed equipment and methods for environmental control. Several plants have already been supplied to third parties, now Baioni have full know-how of the technology and can ensure correct conception of the line based on the specifications of the soil to reclaim and can provide ...


    By Baioni Crushing Plants Spa

  • Liberating contaminants for easy recovery

    The number one challenge associated with most site remediation designs and methodologies is that 90-95 per cent of all environmental contaminants are present in an adsorbed phase onto soil and bedrock surfaces within both saturated and unsaturated zones. Contaminants, including hydrocarbons (LNAPL), chlorinates (DNAPL) and heavy metals, are sorbed onto the substrates and so have reduced mobility ...


    By Ivey International Inc.

  • Oil Spill Eater, Solution Oil Spillage in Niger Delta

    Oil Spill Eater II is the name of a non-toxic product which provides the means for moving oil spill response out of its 19th Century methodology into the realm of advanced technological 21st Century breakthroughs for addressing and remediating 100% of any spill in any environment.  In comparison, current response methods employed by three major oil companies - BP, Exxon and Shell - are ...

  • Oil refinery reduces energy consumption with a Culligan Solution

    Challenge A major petroleum refinery was looking to replace a hot lime softener. Naturally occurring minerals such as Calcium, Magnesium and Silica can cause scale in steam boilers and other types of equipment used in refinery operations. Scale deposits in steam boilers con reduce equipment efficiency and increase energy, chemical, disposal and maintenance costs. Hot lime softening is a ...


    By Culligan Matrix Solutions

  • Analysing four of the most contaminated foodstuffs

    Food adulteration has been around since the Victorian times when cheese was often coloured with lead salts, beer and milk were watered down and flour was bulked out with chalk dust or ground bones [1]. Governments apply stringent legislation and quality standards to food products but the practice of adulteration, driven by greed and profit, is still seen. ...


    By Specac Limited

  • Properties and Behavior of Inorganics in Contaminated Soil

    Often, specific technologies may be ruled out, or the list of potential technologies may be immediately narrowed, on the basis of the presence or absence of one or more of the chemical groups. The relative amounts of each may tend to favor certain technologies. Metals may be found in the elemental form, but more often they are found as salts mixed in the soil. At the present time, treatment ...

  • Oil spillage

    An area of specialisation is the supply of pumping solutions based around their standard product range, but with a complete system designed to suit the end user’s specifi c requirement. Autoclude were approached by an environmentalengineering company who had to recover diesel fuel which had leaked from storage tanks and spread over a wide area. To limit the environmental damage and recover the ...

  • Faroe Maritime Technic provide total solution for treating Oily Sludge and contaminated Oily Water

    We at Faroe Maritime Technic provide total solution for treating Oily Sludge and contaminated Oily Water. Firstly our products - The Sludge Dewatering Separator and The Oil Conveyor are developed for the marine industry, but the same need is also on Power plants on shore. All Oily driven Power plants have these same need for treating Oily Sludge. A brief introduction of our products. ...


    By Faroe Maritime Technic

  • Cement industries solution to Waste Management - Remediation of oil refinery sludge basin

    Abstract Work was completed in early 1992 to clean up a 5.5 acre (2.2 ha) stormwater sludge basin for an oil refinery company. The basin, which had served as a stormwater collection and settling pond for over 40 years, contained oily sludges with high concentrations of certain metals and volatile organic compounds. The closure plan included a combination cement-bentonite slurry wall and jet ...


    By Geo-Con, Inc.

  • Surface active solutions tank cleaning & crude oil sludge removal

    For over ten years Surface Active Solutions has led the way in developing integrated microemulsion solutions for tank cleaning operations, crude oil sludge treatment and slops treatment. The company, with offices in Houston and Grangemouth (Scotland) aims to create real synergy in its approach to tank cleaning by combining its microemulsion chemistries with automated tank cleaning systems. The ...

  • NORMs contamination treatment using Ivey-sol technology

    NORMs (naturally occurring radioactive materials) are found almost everywhere, and many natural materials, such as the earth’s crust, contain such radioactive materials. So what happens when oil and gas activities such as petroleum refining and natural gas extraction, disturb such radioactive material? They can alter the natural background radiation — the radiation that we are naturally exposed ...


    By Ivey International Inc.

  • Kerosene contaminated soil removal - Argyll & Bute

    Remove hydrocarbon impacted material from the garden of a residential property, Glendaruel, Argyll & Bute The Client: Loss Adjuster The Challenge: Following the identification of a leak from a heating oil storage tank at the rear of residential property Soilutions assessed the spill impact. Approximately 200-300 litres of kerosene had ...


    By Soilutions Ltd

  • Density Dependent Water Flow and Contaminant Transport

    SoilVision Systems Ltd. would like to announce the release of the addition of fully coupled density-dependent water flow and contaminant transport in ChemFlux™ and SVFlux™. Using the new density-dependent flow capability can improve the accuracy of the simulation of heavy salt water. This new feature has been implemented in 1D, 2D, and 3D models and is enabled to ...


    By SoilVision Systems Ltd.

  • Density dependant water flow and contaminant transport

    SoilVision Systems Ltd. would like to announce the release of the addition of fully coupled density-dependent water flow and contaminant transport in ChemFlux and SVFlux. Using the new density-dependent flow capability can improve the accuracy of the simulation of heavy salt water. This new feature has been implemented in 1D, 2D, and 3D models and is enabled to work with the Professional version ...


    By SoilVision Systems Ltd.

  • Extending the life of wash solutions

    Simple things we learn early in life might well apply to a basic need of the parts washing market: To look good - wash well before you "dress." Washing metal parts is a necessity prior to painting or plating: If the wash is not properly prepared and foreign substances are not removed from the metal in the wash phase, the finish - the "dress" - may not hold properly, and it may not wear well. ...


    By Oil Skimmers, Inc.

  • Thermal Desorption - A Viable Solution

    Untitled Document As regulations continue to tighten, the need for expedient and accurate remediation technology is of great importance. When faced with the demand or need to reach ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you