oil content monitoring Articles

  • Colour Measurement as a Tool for Monitoring Oil Quality

    This paper takes a look at the many factors known to have a direct or indirect impact on the quality of oil and the diverse range of different measurement devices have been developed for this purpose, such as relative humidity and absolute water content indicators, particle calculators, dielectric sensors, oxidisation indicators (TAN value), viscosity meters and colour analysers. It explains ...


    By Kytola Instruments Oy

  • Different technology options for monitoring oil in produced water – inline continuous monitoring and IR analysis

    No offshore facility wants to be caught with a sheen around their platform as that can result in a costly fine for exceeding discharge permit limits for oil. Onboard oil in water analyzers are necessary to ensure the oil/water separation systems are functioning properly before overboard disposal of the produced water. Bench top analyzers have traditionally been used to test oil in water although ...


    By Spectro Scientific

  • Gas monitoring and leak detection in underwater application for the offshore oil and gas case study

    With over 300 sensors and systems sold world-wide and over 35 scientific users publications, Franatech is market leader for underwater methane detection and monitoring. Franatech is a developer and supplier of sensors for detection of gases in water. The company has more than 15 years experience in subsea applications, working with all kinds of sensing technologies. Coming from a scientific ...


    By Franatech GmbH

  • Understanding and Monitoring Hydrocarbons in Water

    Untitled Document 1. Introduction Oil contamination continues to be a very hot topic, due largely in part to recent catastrophic events with shipping ...


    By Arjay Engineering Ltd.

  • Understanding Oil-in-Water Instrument Specifications

    The measurement capabilities of oil-in-water analysis methods are described by several analytical figures-of-merit. Examples are: Range (Linear and Dynamic) Limit of Detection (LOD) Limit of Quantification (LOQ) Precision (Repeatability and Reproducibility) Sensitivity Accuracy Response Time Some or all of these are often specified by customers in the bid packages issued when selecting a ...

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Solvent-free oil-in-water analysis

    Non-ionic surfactants can homogenize oily, produced water samples, creating optically clear microemulsions that are ideal for fluorescence measurements [1]. The use of surfactants to reduce fouling and improve the performance of on-line, fluorescence-based, oil-in-water monitors has been reported previously [2,3]. This paper describes the use of surfactants to prepare discrete water samples ...

  • Moisture in Oils: The Three-Headed Beast

    Abstract Moisture contamination in in-service lube oils is perhaps one of the most destructive forms of engine corrosion second only to particle contamination.  Water contamination in oil can be categorized into three forms of water; Free, emulsified, and dissolved.  All forms of water have direct consequences to the oil and gears of the engine, but indirect consequences as ...


    By Arizona Instrument LLC

  • Guide To Coolant In Oil Test Methods

    Liquid cooled engines and rotating equipment use glycol based coolants because of their excellent heat transfer abilities. However, glycol based coolants are not desirable at all in lubrication oil itself – Coolant ingression to the lubricant is a particularly nasty contaminant for the variety of damage it can cause. Glycol coolants break down in the high temperature engine environment, ...


    By Spectro Scientific

  • Tyre Pyrolysis Oil Distillation plant, Tyre Pyrolysis Oil Distillation Unit

    Tyre Pyrolysis Oil Distillation Plant Tyre Pyrolysis Oil Distillation Plant Introduction Reduce pressure distillation new technology , is the new technology are developed as per the characters of tyre oil , plastic oil which refine from waste tyre ,plastic.This new ...

  • Monitoring of Algae Growth by TOC Measurement

    Global warming due to the excessive use of fossil fuels is becoming a problem which has prompted and accelerated the search for alternative fuels. Among the more attractive alternatives is biomass fuel, which is attracting considerable attention. Microalgae can be used for the production of oil without competing with food production, and to a greater extent than other biofuels, its ...

  • Groundwater Remediation System Cleans Up Oil Spill

    A customer in TX was recently in some hot water with the local municipal water department. Due to excessive rains near the coast of Texas, the water levels have been higher than usual. The company fills storage tanks with diesel at its facility. However one day the tanks were overfilled and instead of going into the ground, they diesel dispersed out via the high rain water and into the local ...


    By Abanaki Corporation

  • Easy payback from biogas monitoring

    There is a strong business case for biogas monitoring and CHP protection. A fixed biogas analyser may cost some £6-10,000 and monitor gas every few minutes day and night. By comparison it can save its own cost many times over by protecting CHP engines from expensive unplanned downtime, biogas engine ...


    By Geotech

  • Offshore oil spill clean up case study

    In the event of a major incident occurring offshore, for example a tanker casualty running aground or breaking up for any reason, it is of paramount importance to deploy emergency response to protect and save human life. Once this has been done an assessment of the casualty should be made on whether it is possible to salvage the vessel and its contents and to assess the type and amount of oil ...

  • Vegetable Oil Processing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Monitoring hydrocarbons in Bilge water - Case study

    The Situation Various processes onboard ships, such as machinery wash-down, maintenance, and leakage, generate oily wastewater. This contaminated water flow collects in the bilge of the ship. Marine diesel, lubricating oils, grease, as well as other contaminants may be present in bilge water. The bilge water is discharged overboard, with oil and grease concentrations in the discharged ...

  • A quick guide to oil analysis for engine test applications

    Reliability testing is a very important component of new engine development. Engineers need to fully understand and chart the engine lifetime performance under a variety of conditions before mass production may be considered. Many important performance data parameters are collected in real time through the many different types of sensors that are connected to the engine in the test cell and oil ...


    By Spectro Scientific

  • Global monitoring of marine fuels and machine condition

    The “Shipping, Marine and Ports World” has published in its Dec 2012-Jan 2013 issue, an article written by Dr. Helene Gutman (CTO, Xenemetrix Ltd.). The article presents: The use of EDXRF analytical method systems that enable fleet management to optimize bunkering and machine maintenance.   The new sulfur emission regulations for ocean going vessels present a serious challenge ...


    By Xenemetrix Ltd.

  • New oil spill response application note from China

    The Problem: Oil may spill out in the process of oil exploration & development, refining, storage and transportation and enter into open water environment like oceanic environment due to incident or incorrect operation. Oil spill damages include to human heath, safety, ecological environment, aquaculture. In China, the State Oceanic Administration requires the oil content in the discharge to ...

  • Oil waste management through large scale landfarming: a case study

    The operational activities of the oil industry generate solid waste containing several classes of hydrocarbons. Landfarming enables the treatment of large amounts of oil waste through the disposal of waste in the reactive soil layer and hydrocarbon biodegradation. The aim of the present study was to evaluate oil waste management in a 1,000 m² of landfarming area. The operational method used in ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you