oil drilling waste Articles

  • How to Deal with Drilling Waste

    At present, environmental protection is a basic state policy in China, and it has been a strategic mission and goal for our country to maintain a sustainable development of society, economy and environment. Along with the continuous improvement of environmental laws and the increasing environmental awareness among people, the departments concerned have successively enacted various environmental ...


  • Drilling oil recovery from drill cuttings case study

    By econ industries VacuDry indirect heated thermal desorption Drill cuttings are an increasing waste stream worldwide, econ industries addressed the challenge by developing a process that cleans the waste and at the same time recovers valuable drilling oil. The VacuDry plant started the successful processing of drill cuttings in autumn 2013. Our client, a medium-sized recycling company, was new ...


    By econ industries GmbH

  • A new approach to drilling waste management – prevention!

    Grangemouth based Surface Active Solutions (SAS) has developed its microemulsion based technology to aid the prevention and management of drilling waste. The many activities surrounding the removal of drilling mud in surface and downhole cleaning applications usually generate significant volumes of oil contaminated drilling waste. The drilling mud is typically removed through the use of solvents ...

  • 5 Leading Drilling Waste Management Companies

    Drill cutting waste management as a separate niche has gained a lot of traction in recent times. This is true because post Shale Revolution, the hunt for oil and gas is on the rise and with it drilling waste disposal has become quite important. According to the American Petroleum institute, “Approximately 1.21 barrels of drilling waste is produced for every foot drilled in US”. If ...


    By IWA Publishing

  • Mono nov at the cutting edge of drill waste management

    Equipment from Mono is being used in a joint venture with Baroid Drilling Fluids at a state of the art facility in Kazakhstan. Baroid, part of the Halliburton Company, provides drilling fluids and services to energy companiesworldwide, and is a global leader in Total Fluids Management services. The system is a fully contained closed system and uses a Mono pump for handling oil-based mud ...


    By NOV Mono - Mono Pumps Ltd

  • Mono nov at the cutting edge of drill waste management

    Equipment from Mono is being used in a joint venture with Baroid Drilling Fluids at a state of the art facility in Kazakhstan. Baroid, part of the Halliburton Company, provides drilling fluids and services to energy companiesworldwide, and is a global leader in Total Fluids Management services. The system is a fully contained closed system and uses a Mono pump for handling oil-based mud ...


    By NOV Mono - Mono Pumps Ltd

  • Equipment List for full solids manage & drilling waste

    Solids Handle & drilling waste management are pretty important for drilling contractor. If they manage this division well, they can save lots of money on drilling mud / drilling chemicals, also they can be environmental friendly. There is much equipment needed for solids control & drilling waste ...


  • Mercury recovery from industrial waste and toxic residues of natural gas drilling

    econ's client in the east of Germany is one of the few specialised companies in Europe for the treatment of mercury contaminated waste. Typical input material for this type of treatment is sludge from the natural gas industry or other residues from chemical processes, i.e. contaminated filter cake from waste water treat-ment. Among their most important clients are Shell, ExxonMobil, Wintershall ...


    By econ industries GmbH

  • Oil Field Produce Waste Water Treatment

    Oily Waste Produce Water Treatment Oil Field Produce Waste Water Treatment Testing Produce Water Oil Field Production The oil industry has been ...


    By Integrated Engineers Inc.

  • SAS drilling mud cleaning products

    Effective & fast mud cleaning for the oilfield. SAS microemulsion drilling mud cleaning products speed up the cleaning and removal of drilling mud waste. The cleaning of drilling mud residues from mud pits, offshore supply vessels and mud trucks is traditionally a time consuming task. Using high pressure water or standard cleaning detergents usually results in large volumes of mud slop ...

  • Case study: Contract title - ADCO Drilling Operations

    Contract Location: Habshan, U.A.E. Contract Start Date: 10/2002 Contract Finish Date: 2005 Quantity Treated (m3): 30,000 tons Treatment Method: Thermal Desorption Rate of Treatment (m3/hr): 3.5 to 4.5 tons per hour (dependent upon feed) Working Hours per Day: 24 Working Days per Week: 5.5 Project Description: RLC Technologies contracted to ...


    By RLC Technologies, Inc.

  • Solids Control for Drilling Mud Process System

    Nowadays, more and more drilling contractors recognize solids control’s importance to oil and gas drilling, HDD, CSM/CBM exploration, etc. How does solid control affect well drilling? Please find the following details. Cost Comparison of Two Oil Well Drilling Let’s find the difference of two kinds of oil well drilling with and without solids control system. Final effect or result is ...


  • Remediation of hydrocarbon contaminants from oil lagoons and refinery waste - case study

    In 2007 econ delivered an indirectly heated thermal desorption plant to a client in Kuwait. The plant is de-signed to treat various types of waste with hydrocarbon contaminant content. In particular refinery waste, oil lagoons and down hole drilling waste. The aim is to recover the waste hydrocarbons from the soil/sand and remediate the lagoons of their contaminants.  Due to the natural ...


    By econ industries GmbH

  • Degassing Refrigerators - Drill-head and Piercing-plier

    1. For what purpose do we have to degas a refrigerator? A refrigerator has to be disposed as hazardous waste. The refrigerants inside a hazardous refrigerator are harmful for the environment (ozone depleting and greenhouse effect). Most common refrigerants are; R12, R134a and R600a. The uncommon is the removal of NH3. Refrigerants are developed to dissolve very easily into ...


    By ATN Engineering B.V.

  • Waste not, want not

    Consultant Andy Ive considers solutions which not only comply but also enhance the environmental profile of today’s industrial companies. Until recently the prevailing perception in many industries, particularly those operating in emerging market areas has been that waste is an unwelcome inconvenience. The primary infrastructure of most companies was fundamentally not designed to deal with waste ...


    By Ive Design

  • Proof That Bacteria Degrade Oil

    There has been a lot of publicity and ‘noise’ around the ability of bacteria to degrade oil, especially following BP’s Gulf of Mexico incident.  However little has been shown to prove that biological remediation is an effective means of treating oil contamination. Over many years CBIO have worked to develop a range of a microbial products that have proven to be able to ...


    By Cleveland Biotech Ltd.

  • Separation and recovery of oil from oily waste materials using anaerobic thermal desrotpion unit technology

    RLC Technologies, Inc.’s Anaerobic Thermal Desorption Unit (ATDU) is an exsitu, non-incineration technology designed to separate hydrocarbons from various matrices including oilfield waste, soil, sludge, sand, filter-cake, tank and tanker bottoms, organic-based hazardous waste and contaminated soil in a non-oxidizing atmosphere without destroying the hydrocarbons. This paper briefly ...


    By RLC Technologies, Inc.

  • Waste water: Skimming the surface

    A walk on the wild side gave the founder of a Calgary service company a new appreciation for clean water, indirectly laying the foundation for his own future. Years ago, while on the island of Borneo, Jason Snydmiller learned the super-major he was under contract to would promptly fine any contractor that left oil in local waters. Although it seemed harsh then, the rule was necessary, since ...


  • Oil Spill Eater, Solution Oil Spillage in Niger Delta

    Oil Spill Eater II is the name of a non-toxic product which provides the means for moving oil spill response out of its 19th Century methodology into the realm of advanced technological 21st Century breakthroughs for addressing and remediating 100% of any spill in any environment.  In comparison, current response methods employed by three major oil companies - BP, Exxon and Shell - are ...

  • Oil Field Production Wastewater Produce Water Treatment

    Produce Water Treatment Oil Drilling Produce Water Treatment Produce Water Produce water is generated from the oil field production of natural gas and ...


    By Integrated Engineers Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you