oil plant processing Articles

  • Curtailing Contamination Hydrocarbon Engineering July 2017

    During planned shutdowns, the equipment in refineries and petrochemical plants has to be checked. The downtime can require several weeks when tanks, vessels, distillation columns, and pipes have to be drained and cleaned for i   maintenance or repair. Shutdowns are labour-intensive and require accurate scheduling and organisation between all projects, as often hundreds of workers are ...


    By Kurita

  • Heat Recovery Steam Generators (HRSG) & Blowdown Pump Stations

    Romtec Utilities engineers and supplies pump stations for many different applications for industrial facilities across the country. These facilities range from chemical manufacturing to oil & gas refineries, and power generation is another industrial market where Romtec Utilities excels. We have supplied many different types of pumping systems for power gen facilities for wastewater, ...


    By Romtec Utilities Inc.

  • Collini metal processing plant

    Introduction The submerged membrane bioreactor plant at Collini galvanic industries in the West of Austria is a fine example of process optimization in a complex industrial environment. The plant is owned and operated by Collini and is now in its 3rd year treating wastewater from a metal processing facility. It is sited in an industrial estate and discharges into a small waterway in an ...


    By Kubota Membrane

  • Food Processing: Odor Control in Edible Oil Processing

    Abstract: The problems with odor around a typical edible oil deodorizer are discussed in detail, and a three-step solution to eliminate these problems is presented. The three steps are a distillate recovery system which recovers most of the fatty acid in the deodorizer vapor discharge as a valuable byproduct, a closed loop barometric cooling water system which keeps the fatladen ...


    By CR Clean Air Group, LLC

  • New Type of Oil Processing Machine’s Working Principle

    The New Type of Oil Processing Machine of Win Tone reply on mechanical pressure to let the oil separation from the oil plants, this method of mechanical pressure is a pure natural pollution-free authentic first virgin oil, it protects the rich in vitamins, lecithin, unsaturated fatty acids and a variety of nutrients, and the new type of oil processing ...

  • LED Applications for Oil and Gas Refining and Processing

    Oil and gas processing facilities are unsafe due to the existence of hazardous compounds during operations. When addressing such issues, companies in the sector may deploy explosion proof lighting systems to prevent the ignition of sparks created from the electrical equipment. The adoption of LED technology in oil and gas refineries has helped reinforce key safety measures associated with ...


    By Larson Electronics LLC

  • Plant gains efficiency by replacing vacuum-truck process

    A steel min-mill located in Portage, Ind., that produces and sells hot-rolled steel in the north central United States and Canada. The plant produces about 700,000 tons a year and employs about 400 people. On site is an electric arc furnace melt shop that produces continuous-cast steel slabs and a hot-strip rolling mill for further processing of slabs into rolled coils. The mini-mill's raw ...


    By Oil Skimmers, Inc.

  • Major meat-process plant in Canada case study

    In the meat-process plant in Canada managed by a world's leading meat-process plant, huge amount of sludge disposal cost had been a longstanding problem. In production process, approximately 96m3 sludge had been generated a day, and the sludge had been disposed by a waste disposal firm. This sludge disposal cost had reached as much as 93.6 million yen a year. The existing belt press had produced ...


    By AMCON Inc.

  • Tyre Pyrolysis Oil Distillation plant, Tyre Pyrolysis Oil Distillation Unit

    Tyre Pyrolysis Oil Distillation Plant Tyre Pyrolysis Oil Distillation Plant Introduction Reduce pressure distillation new technology , is the new technology are developed as per the characters of tyre oil , plastic oil which refine from waste tyre ,plastic.This new ...

  • Olive Processing

    Problem: The aerated ponds were producing a foul odor & the chloride content of the aquifer was increasing to a level endangering the water quality. Solution: A Hydrocal CAF system is installed to treat the pit water only. This stream, which aligns the olives to be pitted, is highly contaminated with oil, grease, and ruptured olive tissue. The separate ...


    By HydroCal Inc.

  • Assessment of an aerobic treatment system for wastewater from a meat processing plant

    This article presents the assessment of a wastewater treatment system by means of aerobic pools from a slaughterhouse, which presents eliminations below 80% in parameters such as BOD5, SST and grease and oils during 50% of its operating time.Keywords: wastewater treatment, contaminants, BOD, biochemical oxygen demand, TSS, total suspended solids, environmental pollution, ...


    By Inderscience Publishers

  • Hahn manufacturing chose oil skimming to remove tramp oils and saved money in the process

    Hahn Manufacturing, a family-owned business, decided to skim oil, recycle coolant and help keep its part of the world cleaner. Hahn Manufacturing, located in Cleveland, Ohio, supplies precision prototype and production machined parts for OEMs across the country. The coolant tanks in Hahn's multiple machining centers were being contaminated with tramp oil. Plant manager Gary Ott was concerned ...


    By Abanaki Corporation

  • Solving waste oil management and removal problems in power generating plants

    If your plant is like most, it is doing a good job of preventing oily water waste and waste oils from escaping into the environment. But at what cost? As labor resources dwindle, operating and maintaining drainage systems, oil separators, and sometimes inadequate oil removal equipment is expensive. Paying higher than needed costs for waste oil disposal, filtration and water treatment due to these ...


    By Oil Skimmers, Inc.

  • High efficiency waste tyre to oil pyrolysis plant, xinxiang huayin

    Company Profile: Waste tyre to oil  pyrolysis plant use the pyrolysis technology which is a recycling technique converting rubber or tyre waste into fuels, monomers, or other valuable materials by thermal and catalytic cracking processes. Huayin renewable energy equipment company has been leading China oil pyrolysis plant field since 1993. Huayin company offers a wide range of ...


  • Techno-economic assessment of heavy crude oil desalting plant

    Electrostatic desalting is the industrial standard method for removing salt from crude oil. In this study a techno-economic analysis of a crude oil desalting plant is presented. A complete process simulation was conducted using Aspen HYSYS in parallel with a simulation in Microsoft Excel in order to account for salt concentrations. An economic assessment of the proposed design was performed to ...


    By Inderscience Publishers

  • Environmentally friendly cogeneration plant saves time and money with Oil Skimmer

    The U.S. Environmental Protection Agency Performance Track Program is a prestigious program that recognizes the accomplishments of manufacturing facilities that lead the way for improving their facilities’ environmental performance (i.e. reduce air emissions and consumption of water). Brooklyn Navy Yard Cogeneration Partners L.P. is an elite member of this program. They have been recognized for ...


    By Oil Skimmers, Inc.

  • GE Leakwise Application Notes: Oil Leaks at Power Generation Plants

    Fossil Fuel Power Generation Fuel fired power generation plants have several oil storage tanks for feeding fuel to the power units. Coal or gas fired power generation plants also have oil storage tanks to be used for start-up or as a back-up energy source. All ...


    By GE Analytical Instruments

  • Model 8 oil grabber® removes small amounts of oil from plant drain water

    Problem: Worldwide, Reichhold Chemical Corp. produces some 5600 products. At St. Helens, Ore., they produce three -urea, ammonium nitrate and ammonia. Plant drain water is discharged into the Columbia River, and although oily residues are minuscule because of a concerted program to keep oil off the floors, some is present - drippage from ammonia compressors, vehicles and machine maintenance ...


    By Abanaki Corporation

  • Chemical processing facility

    Client: Bell Helicopter Textron Inc. Project Summary  Burns & McDonnell provided design services for the construction of a new 40,000-square-foot facility with two automated chemical processing lines at Bell Helicopter Textron Inc.'s Plant 1 in Hurst, Texas. Spaces were provided for associated manufacturing processes, including non-destructive testing, abrasive blasting ...


    By Burns & McDonnell

  • Meat processing case study

    Design & Build of a Wastewater Treatment Plant The client Our client produces and sells a variety of beef products, including fresh, frozen, canned, both vacuum packed or packaged in a protective atmosphere. They also offer a completerange of cuts and processed hamburgers, ready pre-cooked meals, veal cutlets, grilled and roasted products. The company is the market leader in ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you