oil process water treatment Articles

  • Curtailing Contamination Hydrocarbon Engineering July 2017

    During planned shutdowns, the equipment in refineries and petrochemical plants has to be checked. The downtime can require several weeks when tanks, vessels, distillation columns, and pipes have to be drained and cleaned for i   maintenance or repair. Shutdowns are labour-intensive and require accurate scheduling and organisation between all projects, as often hundreds of workers are ...


    By Kurita

  • Oil Water Emulsion Wastewater Treatment

    Oil Water Emulsion Wastewater Treatment Industry Oil Recovery - Improved Efficiencies A refinery was having several upsets in their biological system due to high loadings of oils after pretreatment API separators and ...


    By Integrated Engineers Inc.

  • Shrimp Processing Wastewater Treatment

    These jars show the treatibility with Floccin J and wastewater from cooked shrimp. The initial untreated water had a TSS of 1,230 ppm and a BOD of 3,000 ppm. The addition of 0.10 grams of Floccin J in 100ml (8.34 lbs/1,000 gallons) created a tight flock and a very clean effluent water quality. The treated TSS was less than 10 ppm and the BOD was 200 ppm. There was a significant amount of oil ...


    By Integrated Engineers Inc.

  • Easy To Integrate: Dezentralised Treatment Of Process Water

    Technical processing systems are some of the most complex industrial plants in existence. In the petrochemical industry, lor example, a great number of chemical products can be manufactured from crude oil and natural gas as a result of chemical-physical processes using such systems. They are designed by special companies, such as the Engineering Division of Linde AG, which having installed over ...


    By EnviroChemie GmbH

  • Food Processing: Odor Control in Edible Oil Processing

    Abstract: The problems with odor around a typical edible oil deodorizer are discussed in detail, and a three-step solution to eliminate these problems is presented. The three steps are a distillate recovery system which recovers most of the fatty acid in the deodorizer vapor discharge as a valuable byproduct, a closed loop barometric cooling water system which keeps the fatladen ...


    By CR Clean Air Group, LLC

  • Oil field Produce Water Treatment Case Study

    Produce Water Treatment Oil Drilling Produce Water Treatment Produce Water Produce water is generated from the oil field production of natural gas and ...


    By Integrated Engineers Inc.

  • Oil Field Produce Waste Water Treatment

    Oily Waste Produce Water Treatment Oil Field Produce Waste Water Treatment Testing Produce Water Oil Field Production The oil industry has been ...


    By Integrated Engineers Inc.

  • Oil Field Production Wastewater Produce Water Treatment

    Produce Water Treatment Oil Drilling Produce Water Treatment Produce Water Produce water is generated from the oil field production of natural gas and ...


    By Integrated Engineers Inc.

  • Treatment of Oily-Waste Process Streams

    Standard oily-wastewater remediation relies on API 650 for oily-wastewater separation (O/W/S) treatment using gravimetric lagoon separation, then reprocessing the recovered floatable slop oil, followed by chemical flocculation, then reprocessing the recovered oily sludge, followed by dissolved air flotation (DAF), then using holdingpond clarification of supernatant wastewater, before ...


  • Treatment Of Edible Oil Refinery Wastewater

    AbstractIndustry manufacturing refined edible oil with a capacity of 18000 tones/annum generated wastewaters and solid wastes (viz. spent earth, chemical and biological sludges). The wastewater streams were mainly from vat house after soap splitting, floor washing, cooling tower, boiler and filter press. The chemical composition of the wastewater from cooling tower and boiler sections and solid ...


  • Oil Drilling Operation Wasteawater Treatment

    Wastewater Treatment Success Stories Oil Industry Operation Wastewater Treatment Wastewater on a self-contained drilling platform comes from several sources. The following examples are samples obtained from the ...


    By Integrated Engineers Inc.

  • Aquamend: Process Water Containing High COD and Oil and Grease

    AQUAMEND™ was used to treat industrial process water containing spent lubricant from a facility in the Northwest USA The investigation focused on evaluation of the efficiency of Adventus’ AQUAMEND™ technology for the treatment of water containing high chemical oxygen demand (COD) and oil and grease, with significant concentrations of ICAP 36 metals present in the solution. The AQUAMEND™ treatment ...


  • Oil Water Separator Maintenance

    Oil water separators (OWS) can be co$tly to maintain, $20,000 or more on average per cleaning and if not properly managed, can be very expensive conduits of pollution. Have you taken steps to minimize the effects and consequences on your operating co$t? When was your facility’s last OWS maintenance ...

  • Treatment of oil-field produced water by combined process of Anaerobic Baffled Reactor (ABR)-Biological Aerated Filter (BAF): a pilot study

    The combined process of Anaerobic Baffled Reactor (ABR) and Biological Aerated Filter (BAF) was used to treat the oil-field produced water. The experimental results showed that for ABR the removal efficiency of oil and COD was 84.5%, 40.8%, respectively, and the ratio of BOD5/COD of the effluent increased 24.8% when the flow rate was 0.3 m³/h. For the BAF, when the hydraulic loading rate was ...


    By Inderscience Publishers

  • Oil Processing Upgrading via Cavitation Technology

    Ultrasonic vortex generators AVS-100   Cavitation technology application   Cavitational effect is accompanied by microexplosions, ultrasound and also by mechanical cuts and encounters from exposure of the hundred of cuts pairs which are moved towards each other with the high linear speed. The value of ...


    By GlobeCore GmbH

  • Metal Processing Facility 2 Wastewater Treatment

    Integrated Engineers, Inc. conducted the below treatability on a Metal Processing facility that uses soluble metal cutting oils in their machining process; below are the results. The treatment required no pH adjustment from the 7.0 pH. The best product was treated with 0.679 grams of Floccin-HP (powdered) in a 100 ml sample and required moderate mixing. The dosage equates to a treatment of 56 ...


    By Integrated Engineers Inc.

  • Shell - produced water treatment

    Client: Shell Auk CETCO Oilfield Services mobilised an 18” diameter twin vessel CrudeSep® test skid and a RFV 3000 adsorption skid comprising of dual sock filter pods and two vessels holding adsorption media canisters. The CETCO equipment was tied in downstream of the existing WEMCO and hydrocylones and successfully treated produced water at a variety of rates. Samples were taken from a variety ...


    By CETCO Energy Services

  • Desalination of oil sands process-affected water and basal depressurization water in Fort McMurray, Alberta, Canada: application of electrodialysis

    The high content of inorganic species in water used to extract bitumen from the Alberta oil sands and in the groundwater below the oil sands is an increasing environmental concern. These water matrices require treatment before they can be reused or safely discharged. Desalination of the oil sands process-affected water (OSPW) and groundwater, or basal depressurization water (BDW), can be ...


    By IWA Publishing

  • Toxicity assessment of oil field produced water treated by evaporative processes to produce water to irrigation

    During the productive life of an oil well, a high quantity of produced water is extracted together with the oil, and it may achieve up to 99% in the end of the well's economical life. Desalination is one of mankind's earliest forms of saline water treatment, and nowadays, it is still a common process used throughout the world. A single-effect mechanical vapor compression (MVC) process was tested. ...


    By IWA Publishing

  • Optimised treatment of Palm Oil Mill Effluent

    In this paper, we study experimentally the problem of separating oil from the oil?water emulsion that emulates Palm Oil Mills Effluent (POME). The investigations are focused on the effects of hydrochloric acid (HCl) and treatment conditions, e.g., operating temperature and magnetic stirring, on the separation process. The experiment results reveal that a higher flotation rate of oil is achieved ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you