oil reclaimers Articles

  • Vibrating feeders for stockpiling and reclaim

    The expanding applications of vibratory feeders for controlling the flow of bulk materials, and their adaptation for processing requirements, have developed considerable interest in stockpiling and reclaim systems. The general design of these units consists of a material transporting trough, or platform, driven by a vibratory force system. The flexibility and variety of designs is limited only by ...


    By General Kinematics

  • Frying oil reclaimed with Abanaki oil grabber® model 8 skimmer

    Golden West Foods' (GWF) circulating water system picks up more than 200 gallons of frying oil every day. The oil enters the wastewater drains during sanitary washdowns. This oil sediment plugs bends in the piping that returns oil to the fryer filter. This sediment - causing oil overflows - comes from the the coating on products such as onion rings and French toast made at the company's Bedford, ...


    By Abanaki Corporation

  • Ultrafiltration reclaims oily process water; reducing operating costs and environmental impact

    Challenge An industry-leading manufacturer of industrial-grade fastening systems discovers a better way to recycle  washwater - reducing fresh water consumption by 130,000 gallons annually and reclaim machining oil by using PRAB’s Ultrafiltration System. Even as demand for its product continued to increase, the manufacturer took the initiative to identify operational ...


    By PRAB, Inc

  • New developments of vibratory feeders for large bulk material reclaim systems

    Summary The efficient economical storage, movement, control and blending of large tonnages at coal handling installations such as mines, power plants and port facilities require new and improved designs of vibratory equipment. Environmental and investment impact as well as operational advantages must be considered in the development of any new reclaim system. ...


    By General Kinematics

  • Oil re-refining methods

    Re-refining is a process of reclaiming used lubricant oils and restoring them to a condition similar to that of virgin stocks by filtration, clay adsorption or more elaborate methods. By this article we want to give you a briefly information about existing methods of oil re-refining. To get more information about installation for oil re-refining processes you ...


    By PC GlobeCore

  • Why clean transformer oil?

    Related Website: http://www.oilrenew.com http://www.leizeyan.com http://www.zhongnengcq.cn ...


  • Methods of oil/fuel analysis

    PC GlobeCore can propose you to make a reclaiming test of yours example of fuel (oil) to verify the possibility of clean it. If the oil is contaminated and not suitable for use, filtration can be recommended. Or, you can also make this test by yourself using our laboratory/test-bench transformer oil vacuum regeneration system UVR. The regenerated samples exceeded yours expectations. Average ...


    By GlobeCore GmbH

  • Peak Oil – Peak Opportunity?

    Possibility and public policies can harness renewable energy technologies for a bright future “Alternative” fuels are nothing new. In fact, they were the mainstream power source a century ago. Rudolph Diesel built his engine to run on peanut oil. Henry Ford designed the Model T to run on ethanol. Wind delivered a significant source of power in the last century. Cheap gasoline (and ...

  • Oil Water Separator Maintenance

    Oil water separators (OWS) can be co$tly to maintain, $20,000 or more on average per cleaning and if not properly managed, can be very expensive conduits of pollution. Have you taken steps to minimize the effects and consequences on your operating co$t? When was your facility’s last OWS maintenance ...

  • MistEliminator removes oil mist effectively

    The challenge Bulten, situated in Sweden is a manufacturing facility. They use cold forming machines to manufacture fasteners, like screws, bolts, valves, etc. Bulten uses metalworking fluids to cool down the products themselves, and to ensure that the machinery and tools do not get rusty. During this metalworking process oil mist arises. These cold forming processes take place in ...


    By Plymovent Group BV

  • Oil Spill Eater, Solution Oil Spillage in Niger Delta

    Oil Spill Eater II is the name of a non-toxic product which provides the means for moving oil spill response out of its 19th Century methodology into the realm of advanced technological 21st Century breakthroughs for addressing and remediating 100% of any spill in any environment.  In comparison, current response methods employed by three major oil companies - BP, Exxon and Shell - are ...

  • Turning coolant contamination into a profitable oil-reclamation program

    What started out as an expensive problem of metalworking coolant contamination has been turned into a profitable oil-reclamation program. Van Huffel Tube of Warren, Ohio – a manufacturer of welded tubing – was spending about $3,000 per year in recharging a soluble-oil coolant tank that would become contaminated with tramp lubricating oil. The 1,000 gallon tank had to be recharged ...


    By Oil Skimmers, Inc.

  • Freytech oil water separators in car wash applications

    Knowing that oil can get into the reclaim water, David F. Roberts, the President of Freytech Inc., recommends the use of an enhanced coalescing oil water separator. “Even trace amounts of oil in the recycled water can diminish the quality of the wash,” he said. “An ‘oil trap’ is not enough since it is simply a tank with baffled walls which does trap some of the oil ...


    By Freytech Inc.

  • Vertical pumps perform oil skimming duties for shell

    The Brent Charlie platform is one of four production platforms serving the Brent Field which is the largest in the UK sector of the North Sea. Installed vertically within one of the platform’s legs, the pumps are required to remove oil from the column and pump it via the reclaimed oil line and crude manifold into storage cells for further processing. Shell Expro required a reliable ...


    By NOV Mono - Mono Pumps Ltd

  • Vertical pumps perform oil skimming duties for shell

    The Brent Charlie platform is one of four production platforms serving the Brent Field which is the largest in the UK sector of the North Sea. Installed vertically within one of the platform’s legs, the pumps are required to remove oil from the column and pump it via the reclaimed oil line and crude manifold into storage cells for further processing. Shell Expro required a reliable ...


    By NOV Mono - Mono Pumps Ltd

  • Oil Skimmers, Inc., pays off for Hon Industries

    The manufacture of metal office furniture has hidden problems which can make production of the end product frustrating and can slow up the production process. One such hidden problem is the presence of waste oil which builds up in the parts washer solution, leaving a film clinging to the metal sur face when the build-up becomes too great. If any oil does remain on the surface, paint will not ...


    By Oil Skimmers, Inc.

  • Model 8 oil grabber® removes small amounts of oil from plant drain water

    Problem: Worldwide, Reichhold Chemical Corp. produces some 5600 products. At St. Helens, Ore., they produce three -urea, ammonium nitrate and ammonia. Plant drain water is discharged into the Columbia River, and although oily residues are minuscule because of a concerted program to keep oil off the floors, some is present - drippage from ammonia compressors, vehicles and machine maintenance ...


    By Abanaki Corporation

  • Reclamation of oil, diesel fuel cleaning, installation by PC Globecore UVR 450/16

    We dig into the myth that recycled, reclaimed transformer oil (or industrial oil, turbine oil, mineral oil, diesel fuel and other types of mineral oils) is BAD oil, and actually show that reclaimed oil might be BETTER then what you are using now!  Installation for cleaning and clarification of dark heating oil and dark diesel fuel also can be use for regeneration of light ...


  • Large office furniture company saves money with Oil Skimmers

    Oil Skimmers, Inc. Pays Off for Hon Industries The manufacture of metal office furniture has hidden problems which can make production of the end product frustrating and can slow up the production process. One such hidden problem is the presence of waste oil which builds up in the parts washer solution, leaving a film clinging to the metal surface when the build-up becomes too great. If any oil ...


    By Oil Skimmers, Inc.

  • Machine shop for oil and gas services provider wins when the chips are down

    Chip Filtering Keeps Machine Shop Coolant Clean Since 1976, Facility Engineer Jay Wilson has handled the HVAC, electrical, and other operational facility needs for a key Texas-based plant within the FMC Technologies, Inc. (FMCTI) family. This leading global provider of technology solutions for the energy industry and other industrial markets was twice named as the Most Admired Oil and Gas ...


    By Abanaki Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you