oil recycling Articles

  • Oil Recycling - Case Study

    The problem: Waste oil recycling contributes very much to climate protection through (CO2) energy saving. Compared to the production of base oil the re-refining of waste oil uses 34 % less resources. In the sixties the German government was subsidising the re-refining of waste oil. Because of that the use of waste oil as a fuel was neglected. The used oil re-refining is the ...


    By Dirk European Holdings LTD

  • Packaged Polymer Injection Dewatering System - Case Studies

    Case Study Number 1 Industry: Oil & Gas, Mining and Civil Waste Management Application: Treatment of Waste Drilling Fluids for Recycling Location: Brisbane, Australia Configuration: 20’ Explosion Proof HMI Dewatering System with VFD Driven EE-1448HD Centrifuge. Objective: Wastewater Treatment Sludge Dewatering in Order to Facilitate Landfill ...


    By Elgin Separation Solutions

  • Tire Shredding: Alternatives to Landfills

    For many reasons, whole tires pose a major problem to landfills. The most obvious is the inefficient use of space. The actual rubber of a tire takes up only a small fraction of the space a tire occupies, and the rest of the space is wasted. A less obvious but far more serious problem is that tires may trap methane gasses when buried with other garbage in landfills. When this happens, the tires ...


    By ECO Green Equipment

  • Invention of the Tire Shredder

    The process of vulcanizing rubber was discovered by Charles Goodyear (yes, you read that right) in 1839, and the development of rubber tires followed not long after (Source: Continental Truck). From there, it didn’t take long for worn-out tires to start piling up, and finding good ways to ...


    By ECO Green Equipment

  • From a 1m3 cubitainer to 50mm chips, using a two-shaft shredder? With SatrindTec, “Sí, es posible!”

    A Spanish manufacturer of HPDE cubitainers and containers based in Cataluña has chosen SatrindTech to implement its recycling line of defective cubitainers. The request received by our Sales Department was to replace an existing SatrindTech twin-shaft shredder, in use since the mid-1990s, to now be able to ensure a regular size of the shredded material. ...


    By SatrindTech Srl

  • A solution to fracturing water supply and disposal issues

    “Water, water, everywhere, Nor any drop to drink.” –The Rime of the Ancient Mariner, Samuel Taylor Coleridge Many topics of conversation among oil and gas industry professionals are predictable – oil price trends, the “great shift change” imperiling the available workforce, and production quotas and caps from OPEC. Yet one pressing topic among those developing ...


    By Fairmount Santrol

  • Small Oil Filter Recycling Line

    Oil Filter Recycling Oil filters recycling line construction is more and more worthwhile as the regulations regarding the containment of scrap motor vehicles increasingly. Also plus the increasing global demand for nonferrous metals and a steady price increase. Small Oil Filter Recycling Line Oil filter recycling line’ s basic ...


    By Harden Industries Ltd.

  • Industrial container recycling simplified by oil skimmer

    Barrel Reconditioning Industries (BRI) of Cottage Grove, MN builds recycling systems for both metal and plastic containers, including lubricating fluid drums and barrels. A typical BRI system consists of several integrated machines or stations, including a solvent preflush and a high pressure water wash. The water wash presents two distinct problems. First, oil and grease contaminated wash water ...


    By Abanaki Corporation

  • Aluminum Recycling

    The Customer The Company is one of the largest producers of aluminum. They conduct business worldwide and serve the aerospace, automotive, building, construction, commercial transportation, consumer electronics, oil & gas, packaging and industrial products & services markets. Aluminum is infinitely recyclable and 75% of all aluminum ever produced is still in use today. ...

  • Vermicomposting biotechnology: recycling of palm oil mill wastes into valuable products

    Abstract Background Palm oil mill effluent and palm press fiber are problematic wastes generated by the palm oil mill industries in Malaysia. This study has endeavored to assess the possibility of the vermicomposting of residue from the palm oil mills using epigeic earthworms Lumbricus rubellus under laboratory conditions. The study was conducted over 50 days using four combinations in ...

  • A Recycling Exemption for Oil/Water Separator Wastes at a Large Military Base in California

    The Health & Safety Code (HSC) in California contains provisions that can exempt a recyclable material from categorization as a hazardous waste if certain strict criteria are met. The Department of Toxic Substances Control (DTSC) is wary of 'sham' recycling and requires substantial proof of beneficial reuse for a facility to qualify for this exemption under HSC 25143.2. A large military ...


    By Coto Consulting, Inc.

  • Waste Tire Recycling Plant for Pyrolysis Tyre to Crude Oil

    Key Specifications/Special Features: Heating system: Reactor: uses Q245R boiler plate Thickness: 12mm, 14mm, 16mm, can be customized Main engine uses horizontal-type of 360° structure 0.8rpm Separation system: Gas separator and depositing tank Depart the heavy oil ...


  • Recycler solves waste oil problem, attains EPA compliance

    Environmental compliance is a major concern and challenge for the recycling industry. There are few recycling industries that face a stiffer challenge than auto recyclers. Vehicles that were once abandoned have become a valuable commodity. Junkers are now being crushed, shredded and recycled to make new steel. While autos contain a lot of valuable and reusable metal, they also contain subs tances ...


    By Oil Skimmers, Inc.

  • Recycler solves waste oil problem, attains EPA compliance

    Environmental compliance is a major concern and challenge for the recycling industry. There are few recycling industries that face a stiffer challenge than auto recyclers. Vehicles that once were abandoned have become a valuable commodity. Junkers are now being crushed, shredded and recycled to make new steel. While autos contain a lot of valuable and reusable metal, they also contain substances ...


    By Oil Skimmers, Inc.

  • How are you recycling your waste oil drums and paint boxes?

    Does your company have waste 210 L oil drums? Or small paint boxes? How do you recycle these drums now? ...


    By Enerpat Group UK Ltd

  • Design for recycling: a route to green ship recycling

    Ship recycling at the end of a ship’s useful life aims to make the shipping industry more environmentally sustainable and is a major source of employment in developing countries. However, there are associated health, safety and environmental concerns. This study argues these concerns are due to inappropriate design and explains how ‘design for recycling’ can reduce the costs and ...

  • Scrap Metal Recycling 1

    Integrated Engineers provided treatability services for the facility for three areas onsite: the oil water separator, tin baler effluent water, and aluminum shavings/cutting oil runoff. The facility processes and bales scrap metal for recycling. The three different waters were treated with Floccin J. Oil Separator The oil separator water is used to remove any free oil that is floating on top of ...


    By Integrated Engineers Inc.

  • Machining Coolant Recycling: Unidrive

     Unidrive Pty Ltd undertake extensive machining operations during the production of automotive components. In the past this resulted in the generation of 20,000 litres of waste coolant every week. By implementing a coolant recovery and recycling system, Unidrive have saved approximately $179,000 per annum as a result of more efficient coolant usage and management. ...


  • Scrap Metal Recycling 2

    This facility was mandated by the Regional Water Control Board to install a treatment system to treat the 8 gpm from their pressure washing operations. The pressure washer is used to remove the dirt mixed with oil and grease from the cranes and skip loader used in the loading and unloading of metal. Integrated Engineers was hired to design and install (turnkey) a 100% water reuse system so the ...


    By Integrated Engineers Inc.

  • Wastewater Treatment & Recycle

    Fresh water is a scarce commodity; this fact is well acknowledged by one and all. People at all levels be it general public, governmental bodies, and industries understand the implications of good quality water availability in terms of quantity, cost and wastage. As a consequence, there is a growing consensus on wastewater treatment for recycle/reuse. This paper briefly describes the treatment ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you