oil remediation filter Articles

  • Considerations for Filtering Heavy Gear Oil

    "We have large circulating systems that service industrial gear sets with heavy gear oils (ISO 460-680). We tried using 25-micron filtration, but this was as fine as we could go due to the high fluid viscosities. We have since abandoned the filters because of the high pressure drop. What can we do to remedy this?" It is true that high-viscosity oils are not as easily filtered. However, all of ...


  • Groundwater Remediation Case Study

    Wastewater Treatment Success Stories Groundwater Remediation This sample is representative of the ground water that contains diesel fuel from years past. The facility currently uses traditional ...


    By Integrated Engineers Inc.

  • Land remediation & sludge processing case study

    In late 2009 the company was approached by a London based consultancy on behalf of their clients with oil and gas interests in an Eastern European country. The brief was to supply a technology that could assist in the clean-up of historical oil spills around redundant oil wells in a working oilfield. Our initial meeting led us to believe that this was a viable contract and following several ...

  • Fuel oil removal

    Project Profile:Aquifer Solutions Groundwater Remediation DATA: End User: Aquifer Solutions, for Republic Paper Location: Board Commissioned: Commerce City, CO, Fall, 2003 Units: (1) FDB-19P Complete with dedicated Flow Rate: backwash ...


    By Filtra Systems

  • Efficient pit remediation - CETCO Oilfield Services Process for Treating Pit Water

    A consulting firm was involved in remediating a large earthen pit, which previously contained oil and produced waters near Venice, Louisiana. The site contained approximately 17,000 barrels of produced water and accumulated rainwater. While the entire project involved many aspects, excavating the contaminated soil could not commence until the 17,000 barrels of oily surface water was removed. ...


    By CETCO Energy Services

  • Multifunctional Well Implemented for In Situ Remediation of Hydrocarbon Contaminations in Soil and Groundwater

    Abstract A recently developed Multifunctional Well has been implemented for the remediation of subsurface contamination caused by hydrocarbon spills. Four different remediation processes can be operated within the same well. At optimal efficiency of each remediation process, successive treatment of the capillary fringes, the vadose zone, and the aquifer can be accomplished. Each treatment ...


  • Using a Self Bailer on Containment Sumps to Filter Hydrocarbons

    How do you eliminate problems associated with the collection of rainwater in outdoor containment systems and maintain compliance with EPA and Clean Water Act regulations?  Since most outdoor oil storage tank sumps and oil drum spill pallets will inevitably be exposed to local precipitation and storm water runoff from nearby catchment surfaces, it is necessary to make sure you ...


    By Interstate Products Inc

  • The Growing Threat To Canada`s Oil Sands Boom

    The Alberta Oil Sands reserves are among the top three oil reserves in the world, and are being aggressively developed by the world's largest energy producers; The Oil Sands are being counted on to replace falling production elsewhere in the world, and are strategically important to the energy industry; Extracting oil from the sands is highly water-intensive and ...


    By Biolargo, Inc.

  • Separation and recovery of oil from oily waste materials using anaerobic thermal desrotpion unit technology

    RLC Technologies, Inc.’s Anaerobic Thermal Desorption Unit (ATDU) is an exsitu, non-incineration technology designed to separate hydrocarbons from various matrices including oilfield waste, soil, sludge, sand, filter-cake, tank and tanker bottoms, organic-based hazardous waste and contaminated soil in a non-oxidizing atmosphere without destroying the hydrocarbons. This paper briefly ...


    By RLC Technologies, Inc.

  • New ASTM Test Method Offers Quick and Easy Oil and Grease Measurement for Water and Soil Samples

    Onsite Field Measurement of Oil and Grease A quick and easy field analysis method for determining oil and grease concentration levels is important for both offshore oil platforms and soil remediation sites.. Prior to the Montreal Protocol, infrared (IR) analysis using Freon as an extraction solvent was a widely used field and laboratory method. In 1999, the U.S. EPA promulgated Method 1664A ...


    By Spectro Scientific

  • Tacoma, Washington - Well 12A superfund site - Case Study

    Combined Remedies for DNAPL Remediation Project Summary TRS Group, Inc. (TRS) teamed with KEMRON and AMEC, under KEMRON's U.S. Army Corps of Engineers (USAGE) Environmental Remediation Services Multiple Award Task Order Contract (MATOC), to perform electrical resistance heating (ERH) for the remediation of volatile organic compounds (VOCs) in the vadose zone ...


    By TRS Group, Inc.

  • Case study - NAPL forensics analysis at refinery site in Kansas

    An environmental consultant at Subsurface Environmental Solutions, LLC used Sitelab to fingerprint a large plume of Non Aqueous Phase Liquids (NAPL) located at a former oil refinery in Kansas. The plume is commingled with gasoline, diesel, crude oil and other petroleum products. Sitelab’s portable UVF-3100D analyzer is fitted with optical filters which can measure the C6 to C10 gasoline ...


    By Sitelab Corporation

  • Superfund site - creosote removal

    Project Profile:US EPA Groundwater Remediation of Creosote Oil DATA: End User: US EPA, Army Corps of Engineers, Superfund site program Location: Bainbridge Island, WA Commissioned: Spring, 2005 Units: (1) FDB-7P Hydromation Deep Bed, Filter (HDBF) Flow Rate: 70 ...


    By Filtra Systems

  • HS-200 Lowering company costs and liability

    A major printing company was experiencing difficulties with managing their wastewater treatment system due to a higly concentrated oily water influent. The grab samples performed by the local sanitary district exhibited high levels of BOD, COD and oil and grease levels in the discharge water. The problem was traced back to their compressor condensate discharge. The company has ...


    By Hydrosil International

  • EPA Technology News & Trends - Tacoma “Well 12A” Superfund Site

    The U.S. EPA Region 10 office uses an adaptive site management approach that relies on high-resolution site characterization (HRSC) techniques for strategic sampling at the Well 12A project area. This approximate one-square-mile project area is one of three at the 2.5-square-mile Commencement Bay-South Tacoma Channel Superfund site in Tacoma, Washington. The vicinity of Well 12A, one of 13 wells ...


    By TRS Group, Inc.

  • Case study of Moyno Tri-Phaze System

    Pembina Belly River B East Unit, Warburg, Alberta, Canada In 1994, Talisman Energy, Inc. acquired the majority working interest in the Pembina Belly River B East Unit in Warburg, Alberta, Canada. It was considered attractive due to its potential to increase oil production through workovers and infill drilling. The old battery, constructed in the 1960’s, consisted of a production header ...


    By Moyno, Inc.

  • NORMs contamination treatment using Ivey-sol technology

    NORMs (naturally occurring radioactive materials) are found almost everywhere, and many natural materials, such as the earth’s crust, contain such radioactive materials. So what happens when oil and gas activities such as petroleum refining and natural gas extraction, disturb such radioactive material? They can alter the natural background radiation — the radiation that we are naturally exposed ...


    By Ivey International Inc.

  • Treatment of Oily-Waste Process Streams

    Standard oily-wastewater remediation relies on API 650 for oily-wastewater separation (O/W/S) treatment using gravimetric lagoon separation, then reprocessing the recovered floatable slop oil, followed by chemical flocculation, then reprocessing the recovered oily sludge, followed by dissolved air flotation (DAF), then using holdingpond clarification of supernatant wastewater, before ...


  • The Alternative to Pump and Treat

    Sometimes, an important technological advance begins with a small step – back! Such is the case with remediation of hydrocarbons from groundwater utilizing existing recovery and monitoring wells. For the past few years, state government has based decisions on the amount of clean up that they require by the risk posed to the environment. Risk Based Corrective Action, commonly called 'Rebecca' ...


    By Abanaki Corporation

  • Top 3 Uses of Activated Carbon

    Activated carbon is an effective purifier. It is used to remove organic pollutants from different gaseous, liquid and solid substances. By removing the undesirable organic compounds, activated carbon can successfully remove the odour and taste of these compounds from a wide range of things.  Unlike other purification agents that react with organic compounds and change their nature, activated ...


    By Nichem Co.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you