oil sand separator Articles

  • Oil Analysis for Hydraulic Systems

    Hydraulic systems are used in industrial, mobile and aviation applications to transmit power to operate equipment. They are incredibly efficient, compact, and lightweight relative to a mechanical equivalent. Hydraulic fluids transmit force in the system, and as such are carefully chosen by the system maker.  Chemical stability, high flash and fire points, viscosity, and oxidation resistance ...


    By Spectro Scientific

  • Separation

    Introduction: Ex situ separation can be performed by many processes. Gravity separation and sieving/physical separation are two well-developed processes that have long been primary methods for treating municipal wastewaters. Magnetic separation, on the other hand, is a much newer separation process that is still being tested. Gravity Separation Gravity ...

  • Tackling waste in the sands of the Sahara

    When gas was discovered in the mid Sahara areas of North Africa in the 1990s Andy Ive was asked by BP to help set up the water and waste infrastructure for what amounted to four small towns 600 km into the desert. No local infrastructure at all existed for the waste and water to be produced by 2-3000 workers. IVE overcame sandstorms, extreme heat, poisonous snakes and patented a novel solution to ...


    By Ive Design

  • Well-to-Wheels Greenhouse Gas Emissions of Canadian Oil Sands

    Are greenhouse gas emissions from Canada’s oil sands higher than those from conventional oil? Apparently yes, according to a new study funded in part by the U.S. Department of Energy. It says oil from Canada’s oil sands produce greenhouse-gas emissions that average 20% more than from oil from conventional U.S. crude. The study ...


    By GLOBE SERIES

  • Ivey-Sol Technology has potential to increase oil recovery of oil-sands waste by 15-25 percent

    Alberta’s oil sands are comprised of one of the world's largest sources of bitumen, containing an estimated 1.6 trillion barrels. About two tonnes of oil sands must be dug up and processed to produce one barrel of oil. Oil sands recovery processes include extraction and separation systems to remove bitumen from sand and water. Separating the oil from the sand is difficult and costly, and getting ...


    By Ivey International Inc.

  • What do oil sands and shale gas have in common? Acute need for sustainable water management solutions

    The world’s appetite for fossil fuels is not abating anytime soon, and the alternatives fall short. Nuclear energy makes people uneasy, coal is perceived as not being that clean, hydroelectric requires massive capital outlays, solar is still improving and the wind just doesn’t always blow. For the foreseeable future, North Americans have embraced the idea that expanded production of ...


    By Biolargo, Inc.

  • Innovation in Offshore Separation Process

    CLOV is a deep-sea oil production project offshore Angola. Sulzer helped to lower the cost of the floating production, storage, and offloading (FPSO) ship. There, Sulzer’s patented distributor technology and state-of-the-art pumps are brought to life by Total’s innovative wash tank process. This combination achieves significant cost savings on the FPSO design. With a processing ...


    By Sulzer Management Ltd

  • Separation and recovery of oil from oily waste materials using anaerobic thermal desrotpion unit technology

    RLC Technologies, Inc.’s Anaerobic Thermal Desorption Unit (ATDU) is an exsitu, non-incineration technology designed to separate hydrocarbons from various matrices including oilfield waste, soil, sludge, sand, filter-cake, tank and tanker bottoms, organic-based hazardous waste and contaminated soil in a non-oxidizing atmosphere without destroying the hydrocarbons. This paper briefly ...


    By RLC Technologies, Inc.

  • Oil Water Separator CarWash in Finland HD Q-PAC Retrofit Eliminates Maintenance Headache

    Introduction Getting your vehicle washed is always a good idea. But the dirt (leaves, sand and other grit) and especially oils that wash off vehicles need to be collected and removed from the water before the water can be reused or discharged. HD Q-PAC is Installed in Car Truck Wash Oil Water Separator A car wash (average 150 vehicles per day) located near Helsinki, Finland had an oil ...


    By Lantec Products, Inc.

  • MVC technology to recover oil from SAGD facility

    The Facility The SAGD Facility is called “Orion” and consists of 4 major processes: Steam Generation, Injection/Recovery Wells, Deoiling and Water Purification, for recovery of oil. The Players Aquatech will be working alongside Shell Canada (formerly BlackRock Ventures), the developer and IMV Projects, the integration engineers. ...

  • Inland oil spill clean up case study

    Introduction The essential strategy for inland spill clean up techniques should be containment, recovery and temporary storage. Secondary needs will include transportation and possible disposal - or recycling. It is important to discover the source of the spill which might not be straight forward. A steady slow seepage from a leaking disused oil storage tank may be very difficult ...

  • Argentina’s largest oil co. uses mono for shear sensitive duties

    YPF produces in the region of 400,000 barrels of oil per day from the Neuquen Province, of which 123,080 barrels/day are produced from the Lomitas Chiuhido oil field in the Rincon de Los Sauces region. The Mono Industrial E Range pumps have been installed on a first stage upstream process to transfer a mixture of formation water, crude oil and sand from the intake tank to the separator system. ...

  • Remediation of hydrocarbon contaminants from oil lagoons and refinery waste - case study

    In 2007 econ delivered an indirectly heated thermal desorption plant to a client in Kuwait. The plant is de-signed to treat various types of waste with hydrocarbon contaminant content. In particular refinery waste, oil lagoons and down hole drilling waste. The aim is to recover the waste hydrocarbons from the soil/sand and remediate the lagoons of their contaminants.  Due to the natural ...

  • New air quality rules challenge oil & natural gas industry

    EPA Administrator signed a suite of proposed new air regulations affecting both the Production/Processing and Transmission/Storage sectors of the oil and natural gas industry. The proposed rules mandate the use of emission controls as well as work practices through two different air regulatory programs – New Source Performance Standards (NSPS) and National Emissions Standards for Hazardous ...


    By Trinity Consultants

  • Optimizing water management in hydraulic fracturing for shale oil and gas production

    Centralized treatment of wastewater is emerging as a viable solution for long-term efficiency in managing water sourcing and wastewater treatment in hydraulic fracturing. The number of hydraulic fracturing (fracking) shale oil and gas wells in the United States continues to increase. Within the Bakken Shale formation alone, in North Dakota and Montana, upwards of 15,000 hydraulic fracturing ...


    By WesTech Engineering, Inc.

  • Optimizing Water Management in Hydraulic Fracturing for Shale Oil and Gas Production

    Centralized treatment of wastewater is emerging as a viable solution for long-term efficiency in managing water sourcing and wastewater treatment in hydraulic fracturing. The number of hydraulic fracturing (fracking) shale oil and gas wells in the United States continues to increase. Within the Bakken Shale formation alone, in North Dakota and Montana, upwards of 15,000 hydraulic fracturing ...


    By WesTech Engineering, Inc.

  • Different technology options for monitoring oil in produced water – inline continuous monitoring and IR analysis

    No offshore facility wants to be caught with a sheen around their platform as that can result in a costly fine for exceeding discharge permit limits for oil. Onboard oil in water analyzers are necessary to ensure the oil/water separation systems are functioning properly before overboard disposal of the produced water. Bench top analyzers have traditionally been used to test oil in water although ...


    By Spectro Scientific

  • Petronas - production fluid desanding

    Client: Petronas Tukau Field CETCO Oilfield Services Company has successfully implemented a technology to prevent sand issues which can potentially disrupt production in Petronas’ Tukau field near Miri in East Malaysia. Working with BJ Services, CETCO utilized a desanding system that extracts sand from the production fluids upstream of the field’s TKDP-A platform’s production facilities as part ...


    By CETCO Energy Services

  • The Crushers make environment better

    We need more sand As we all know,the sand is very useful in construction,building,filtering and breeding beautification.With the development of the industries, more and more sand are needed for make our city better. Well,the natural sand is under the river,and we have to use the dredgers make the sand out to use them in our industries.The more sand we need, the more we dug,the more we ...


    By SBM

  • Case study - tailing ponds

    Location: Canada Year: 2012 Working context Oil Sand - Tailing pond dredging - The standard industry practice is to pump oil sands tailings into large settling ponds. There, the heaviest material settles to the bottom, separating from the top layer of water which can be recycled. The problem Oil ...


    By Dragflow North America

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you