oil sludge incinerator Articles

  • Minimization of Major Air Pollutants from Sewage Sludge Fluid Bed Incinerators

    ABSTRACT Emissions of major air pollutants including carbon monoxide (CO), nitrogen oxides (NOx) and mercury (Hg) were studied at two sewage sludge fluidized bed combustion (FBC) plants. Both the North West Bergen (NWB) County Utility Authority and the Little Miami (LM) plants have air pollution control systems (APCS) that are of the wet type. Various operating conditions such as temperature, ...

  • Centralised treatment of oil sludge and other industrial waste

    Centralised treatment of various sources of industrial waste has been established in many European countries over the last decade. Many facilities are still equipped with non state of the art technology and therefore cannot fulfil the broad field of applications with regard to industrial waste remediation. econ's international client decided to be one step ahead and erected a new econ industries ...

  • Centralised treatment of oil sludge and other industrial waste - case study

    Centralised treatment of various sources of industrial waste has been established in many European countries over the last decade. Many facilities are still equipped with non state of the art technology and therefore cannot fulfil the broad field of applications with regard to industrial waste remediation, econ's international client decided to be one step ahead and erected a new econ industries ...

  • GWT BIO PS10 Series Case Study- Petrochemical Sludge Reduction

    GWT BIO™ Series Natural Microbiological Product Petroleum Refinery Field Case Study This field case study describes how our GWT BIO PS10 series natural microbiological product provides an alternate solution for disposal of hazardous organic compounds and offers a long term, cost-effective solution to the toughest waste water ...

  • Separation and recovery of oil from oily waste materials using anaerobic thermal desrotpion unit technology

    RLC Technologies, Inc.’s Anaerobic Thermal Desorption Unit (ATDU) is an exsitu, non-incineration technology designed to separate hydrocarbons from various matrices including oilfield waste, soil, sludge, sand, filter-cake, tank and tanker bottoms, organic-based hazardous waste and contaminated soil in a non-oxidizing atmosphere without destroying the hydrocarbons. This paper briefly ...


    By RLC Technologies, Inc.

  • Nuclear Plant in southeastern United States case study

    Turning Liquid Waste into Solid Money Savings using QUIK-SOLID© Project Background: A nuclear plant located in southeastern United States had to dispose of approximately 7,000 gallons (26,488 L) of liquid sludge that resulted from aggressive preventive maintenance activities. The plant stored the watery sludge in B-25 boxes (90 ft each). The slightly ...


    By CETCO

  • Refuse Derived Fuel, Current Practice and Perspectives

    Untitled Document Summary I OBJECTIVES The objectives of the project were to undertake a survey on the current ...

  • EPA issues final rules for boilers

    The U.S. Environmental Protection Agency (EPA) reports that more than 200,000 boilers, process heaters and incinerators will be impacted by a set of Clean Air Act regulations issued on February 21, 2011. Since EPA first proposed the ...


    By Bergeson & Campbell, P.C.

  • PCB clean-up on behalf of the United Nations

    The Environmental Services group of ABB won a contract from the United Nations (UNOPS) for the clean-up and of a PCB spill in Yugoslavia and for the disposal of the resulting PCB wastes. This project is the first clean-up of ...

  • New solid waste definition proposed

    When the Boiler MACT rule was vacated in 2007, one key element in the court challenge was that many non-fossil fuel materials burned in industrial boilers should be classified as solid wastes and regulated accordingly. Along with the recently proposed Boiler MACT and rules for commercial/industrial/solid waste incinerators (CISWI), EPA proposed criteria to determine whether non-hazardous ...


    By Trinity Consultants

  • Baseline Projections of Selected Waste Streams

    Abstract Waste represents an enormous loss of resources both in the form of materials and energy. Indeed, quantities of waste can be seen as an indicator of the material efficiency of society. Waste generation is increasing in the European Union, and amounted to about 3.5 tonnes of solid waste per person in 1995 (excluding agricultural waste) 1 Excessive quantities of waste result from: ...

  • Dazed and Confused: Alternative fuels and the CISWI definitions rule

    As discussed in ALL4’s December 2008 issue of 4 The Record, the use of alternative and non-traditional fuels for heat and power generation is on the rise, an increase that can be attributed to the price surge and volatility of traditional fossil fuels, as well as to a general desire to use more environmentally friendly materials to reduce greenhouse gas emissions. Alternative fuels have been ...


    By All4 Inc.

  • Management of Hazardous Wastes

    ' Management of hazardous waste is a growing concern in many countries. The long-term impacts and costs of improper disposal can be very high and the emphasis must be on prevention. A comprehensive management system should include (i) policies, institutions and effective regulations and (ii) adequate and acceptable disposal facilities (either public or private). This note outlines the key ...


    By The World Bank

  • Transforming waste into profit: Bioconversion soultions

    BioConversion Solutions, LLC (BCS) has the systems and solutions to transform dealing with biomass from an expense into profit for cities and companies worldwide. Instead of sludge requiring treatment and disposal, BCS has developed sophisticated technologies that allow customers to design, build and operate biological conversion plants. Using the proven proprietary Advanced ...

  • Pyrolysis

    Introduction: Pyrolysis is formally defined as chemical decomposition induced in organic materials by heat in the absence of oxygen. In practice, it is not possible to achieve a completely oxygen-free atmosphere; actual pyrolytic systems are operated with less than stoichiometric quantities of oxygen. Because some oxygen will be present in any pyrolytic system, nominal oxidation will occur. If ...

  • Pesticides Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • What is energy recovery?

    Processes like incineration and anaerobic digestion not only provide sources of energy, but they also reduce waste volume The term “energy recovery” often is applied only to a narrow number of methods for converting wastes into energy, when in fact it applies to a broad range of technologies used to create heat, electricity, or fuel. Energy recovery gives ...


    By Fluence Corporation

  • A Citizen`s Guide to Chemical Dehalogenation

    What is chemical dehalogenation? Chemical dehalogenation is a chemical process to remove halogens (usually chlorine) from a chemical contaminant, rendering it less hazardous. Halogens are a class of chemical elements that include chlorine, bromine, iodine, and fluorine. Polychlorinated biphenyls are halogenated compounds that once were used in high voltage electrical transformers because they ...

  • We purify our waste­ water optimally

    Holzkirchen wastewater treatment plant achieves a new milestone in energy efficiency with AERsmart The Holzkirchen wastewater treatment plant has a clearly stated objective: “We purify our wastewater optimally.” For the municipal wastewater treatment plant, located 40 kilometres south of Munich, there is a requirement to operate in a way that is as resource-efficient as ...

  • Controlling Stack Emissions in the Wood Products Industry

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you