oil spill absorbent Articles

  • Hydraulic Oil Spill on Roadway

    Fuel Oil Soaked Wood. Contact was made to our office in May/2007 regarding the wood base underneath an oil/kerosene furnace system which, upon removal, it was discovered that kerosene had leaked and was somewhat permeated, leaving an odor. With over-time saturation of the wood, we recommended multiple treatments. After use of our Terracap 3000/4000 kit, we received the following in a letter: "I ...


  • Oil Spill Technologies Heat Up

    The highly successful, widespread deployment of PyroBoom® fireboom for controlled burning in the Gulf represented a crowning achievement in a development journey spanning more than 30 years. The concept of burning spilled or leaked oil on the sea’s surface has been known for many years, offering an extremely effective way of reducing the spill by as much as 90 percent with minimal ...


    By DESMI A/S

  • Time to Ban Clay for Oil Spill Cleanup

    The Silent Menace that Government Agencies Can No Longer Ignore Every day in the United States - and beyond - government agencies, fleet managers, auto mechanics, gas and service stations and hundreds of thousands of consumers violate US hazardous waste laws by throwing clay-based oil spill cleanup products into the trash, bound for a landfill where it will contribute to the pollution of aquifers ...


  • Case Study - BP oil spill bioremediation tests

    CL Solutions, LLC has completed some internal preliminary testing of Munox SR® at the request of our customers and regulators in the Gulf Region. Although, our products have been used to remediate soil and ground water at numerous locations in the region, these tests were undertaken to verify specific applicability to the BP spill. Tar Ball Treatment While manual removal of ...


    By NRG SAVE INC.

  • Oil Spill Eater, Solution Oil Spillage in Niger Delta

    Oil Spill Eater II is the name of a non-toxic product which provides the means for moving oil spill response out of its 19th Century methodology into the realm of advanced technological 21st Century breakthroughs for addressing and remediating 100% of any spill in any environment.  In comparison, current response methods employed by three major oil companies - BP, Exxon and Shell - are ...

  • Determining flammability of SpillFix Universal Organic Absorbent

    SpillFix Universal Organic Absorbent is an industrial absorbent product made from natural coir (coconut husk). Flammability tests (as detailed below) have determined that the product is a Not Readily Combustible Solid, and is unlikely to catch fire even after absorbing flammable spills. Determining Flammability The tests for determining ...

  • Case study - Public-private partnership successfully tests leakwise early oil spill detection sensor in the tidal Delaware river

    Background In the summer of 2011, the Delaware River Basin Commission (DRBC) and the U.S. Geological Survey (USGS) collaborated with GE Analytical Instruments on a unique test deployment of an oil sheen sensor in the tidal Delaware River. The idea for the test deployment arose during meetings of the Delaware River and Bay Oil Spill Advisory Committee, which includes organizations and ...


    By GE Analytical Instruments

  • Open water spill at Kemess Mine in Canada

    We received a request for SpillRemed (Industrial) from Kemess Mine located in the rocky mountains in Canada. The mine was so inaccessible that it took almost 10 days for the shipment to reach the customer. The company had a diesel spill in the containment berm and as per the standard protocol absorbent booms were placed to recover the spill, but unfortunately the boom absorbed water and sank at ...


    By Sarva Bio Remed, LLC

  • Shop Spill Cleanup, Mitigation for Waste Applications

    Spills and effluent water around a shop can cause an operation time and money. Taking simple steps to understand and apply best practices and the right products can mitigate the problematic effects and make any shop safer. If you work in a maintenance shop in the waste industry, you know that one thing is unavoidable—spills. With so many pieces of equipment and so many fluids around ...


    By Waste Advantage Magazine

  • Got a spill kit? Is it the right one for your needs?

    Is your facility storing or working with liquids on a daily basis? If so, are any of the liquids that you are working with aggressive by nature? You may just be working with non-aggressive aqueous based liquids or maybe you are working with hydrocarbons such as oil or gasoline? No matter what your industry is, a liquid spill is still a mess any way you look at it. Cleaning up a spill may be a ...


    By Chemtex, Inc.

  • Seaswarm to Clear out Oil

    When an oil spill occurs, the challenge is clearing out of the oil fast and secure. Seaswarm is a possible solution to this dilemma. Robotic cleaning instruments absorb the oil and move independently and autonomously. They can communicate between them and coordinate their actions. The supplier claims the job will be done efefctively. ...


    By IWA Publishing

  • Elimination of oil stains in a fast food takeout lane case study

    MICROCAT-SMPL Hydrocarbon Cleaner/Degrader was added to remove oil stains from a fast food takeout car lane. Objective of Treatment Eliminate the oil stains on the pavement and treat hydrocarbons in an environmentally safe way. Site History In an area where cars stop frequently to pick up fast food, they drop small amouts of oil and other hydrocarbons on ...


    By Bioscience, Inc.

  • Solving waste oil management and removal problems in power generating plants

    If your plant is like most, it is doing a good job of preventing oily water waste and waste oils from escaping into the environment. But at what cost? As labor resources dwindle, operating and maintaining drainage systems, oil separators, and sometimes inadequate oil removal equipment is expensive. Paying higher than needed costs for waste oil disposal, filtration and water treatment due to these ...


    By Oil Skimmers, Inc.

  • Introducing `Oscar`

     Introducing O.S.C.A.R., Guardian Environmental Technologies newest entrant to the oil sheen control and removal community. This product incorporates the industry approved standard oil spill containment booms with Guardian's own SheenGuard oil sheen removal blankets. The absorbent used is PetroGuard, the original oil solidifier that was introduced by Guardian in 1992. OSCAR's unique design ...

  • This New Year, Commit to Workplace Health and Safety

    Workplace health and safety is something that every industry and career path faces in its own way. While our team primarily focuses on issues that impact people who work with chemicals or liquids, like fuel distributors or chemists, we see on the news all too often the impact of lax safety regulations in all sorts of workplaces and industries. We understand that accidents happen ...

  • A Simplified Procedure for the Determination of TPH’s in Waters and Soils Using the HC-404 System

    The determination of Total Petroleum Hydrocarbons (TPH), greases, and lubricant residues are important environmental and industrial tests. Fuel and lube oils can be determined in water and soils to track spills and storage tank leaks, while many military and industrial situations require certain components (gas regulators, space shuttle components, weaponry parts, etc.) to have a maximum limit of ...


    By Buck Scientific Inc

  • OSE II economic comparison to dispersants and mechanical Clean ups

    INTRODUCTION   Oil Spill Eater II is the name of a non-toxic product which provides the means for moving oil spill response out of its 19th Century methodology into the realm of advanced technological 21st Century breakthroughs for addressing and remediating 100% of any spill in any environment. In comparison, current response methods employed by three major oil companies - BP, Exxon ...

  • Fabrication of polysiloxane-modified polyurethane sponge as low-cost organics/water separation and selective absorption material

    Through sol-gel and dip-coating processes, commercial polyurethane sponge modified by polysiloxane was fabricated under low temperature (60 °C) and atmosphere. The contact angle of the obtained polysiloxane/polyurethane sponge is 145 ± 5°. Hence, the polysiloxane/polyurethane sponge could float on water and selectively absorb organics from the surface of the water, indicating simultaneous ...


    By IWA Publishing

  • Unique sponge system contains water contaminants in storm drains

    Untitled Document SmartSponge technology captures oil and hydrocarbons from stormwater runoff, preventing its discharge into receiving waters. Water quality is being ...


    By Baum Publications Ltd.

  • Plant gains efficiency by replacing vacuum-truck process

    A steel min-mill located in Portage, Ind., that produces and sells hot-rolled steel in the north central United States and Canada. The plant produces about 700,000 tons a year and employs about 400 people. On site is an electric arc furnace melt shop that produces continuous-cast steel slabs and a hot-strip rolling mill for further processing of slabs into rolled coils. The mini-mill's raw ...


    By Oil Skimmers, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you