oil spill absorbent product Articles

  • Hydraulic Oil Spill on Roadway

    Fuel Oil Soaked Wood. Contact was made to our office in May/2007 regarding the wood base underneath an oil/kerosene furnace system which, upon removal, it was discovered that kerosene had leaked and was somewhat permeated, leaving an odor. With over-time saturation of the wood, we recommended multiple treatments. After use of our Terracap 3000/4000 kit, we received the following in a letter: "I ...


  • Oil Spill Technologies Heat Up

    The highly successful, widespread deployment of PyroBoom® fireboom for controlled burning in the Gulf represented a crowning achievement in a development journey spanning more than 30 years. The concept of burning spilled or leaked oil on the sea’s surface has been known for many years, offering an extremely effective way of reducing the spill by as much as 90 percent with minimal ...


    By DESMI A/S

  • Time to Ban Clay for Oil Spill Cleanup

    The Silent Menace that Government Agencies Can No Longer Ignore Every day in the United States - and beyond - government agencies, fleet managers, auto mechanics, gas and service stations and hundreds of thousands of consumers violate US hazardous waste laws by throwing clay-based oil spill cleanup products into the trash, bound for a landfill where it will contribute to the pollution of aquifers ...


  • Case Study - BP oil spill bioremediation tests

    CL Solutions, LLC has completed some internal preliminary testing of Munox SR® at the request of our customers and regulators in the Gulf Region. Although, our products have been used to remediate soil and ground water at numerous locations in the region, these tests were undertaken to verify specific applicability to the BP spill. Tar Ball Treatment While manual removal of ...


    By NRG SAVE INC.

  • Oil Spill Eater, Solution Oil Spillage in Niger Delta

    Oil Spill Eater II is the name of a non-toxic product which provides the means for moving oil spill response out of its 19th Century methodology into the realm of advanced technological 21st Century breakthroughs for addressing and remediating 100% of any spill in any environment.  In comparison, current response methods employed by three major oil companies - BP, Exxon and Shell - are ...

  • Determining flammability of SpillFix Universal Organic Absorbent

    SpillFix Universal Organic Absorbent is an industrial absorbent product made from natural coir (coconut husk). Flammability tests (as detailed below) have determined that the product is a Not Readily Combustible Solid, and is unlikely to catch fire even after absorbing flammable spills. Determining Flammability The tests for determining ...

  • Shop Spill Cleanup, Mitigation for Waste Applications

    Spills and effluent water around a shop can cause an operation time and money. Taking simple steps to understand and apply best practices and the right products can mitigate the problematic effects and make any shop safer. If you work in a maintenance shop in the waste industry, you know that one thing is unavoidable—spills. With so many pieces of equipment and so many fluids around ...


    By Waste Advantage Magazine

  • Got a spill kit? Is it the right one for your needs?

    Is your facility storing or working with liquids on a daily basis? If so, are any of the liquids that you are working with aggressive by nature? You may just be working with non-aggressive aqueous based liquids or maybe you are working with hydrocarbons such as oil or gasoline? No matter what your industry is, a liquid spill is still a mess any way you look at it. Cleaning up a spill may be a ...


    By Chemtex, Inc.

  • Elimination of oil stains in a fast food takeout lane case study

    MICROCAT-SMPL Hydrocarbon Cleaner/Degrader was added to remove oil stains from a fast food takeout car lane. Objective of Treatment Eliminate the oil stains on the pavement and treat hydrocarbons in an environmentally safe way. Site History In an area where cars stop frequently to pick up fast food, they drop small amouts of oil and other hydrocarbons on ...


    By Bioscience, Inc.

  • Solving waste oil management and removal problems in power generating plants

    If your plant is like most, it is doing a good job of preventing oily water waste and waste oils from escaping into the environment. But at what cost? As labor resources dwindle, operating and maintaining drainage systems, oil separators, and sometimes inadequate oil removal equipment is expensive. Paying higher than needed costs for waste oil disposal, filtration and water treatment due to these ...


    By Oil Skimmers, Inc.

  • Tiny materials in countless products raise big questions for environment and health

    Nanotechnology opens a universe of possibilities — but also creates a world of unknowns. In recent years, efforts to develop the Next Big Thing — whether in medicine, computer technology, pollution prevention or high-performance materials — have turned to some really, really small things: nanomaterials. Working at the ...


    By Ensia

  • Introducing `Oscar`

     Introducing O.S.C.A.R., Guardian Environmental Technologies newest entrant to the oil sheen control and removal community. This product incorporates the industry approved standard oil spill containment booms with Guardian's own SheenGuard oil sheen removal blankets. The absorbent used is PetroGuard, the original oil solidifier that was introduced by Guardian in 1992. OSCAR's unique design ...

  • OSE II economic comparison to dispersants and mechanical Clean ups

    INTRODUCTION   Oil Spill Eater II is the name of a non-toxic product which provides the means for moving oil spill response out of its 19th Century methodology into the realm of advanced technological 21st Century breakthroughs for addressing and remediating 100% of any spill in any environment. In comparison, current response methods employed by three major oil companies - BP, Exxon ...

  • Unique sponge system contains water contaminants in storm drains

    Untitled Document SmartSponge technology captures oil and hydrocarbons from stormwater runoff, preventing its discharge into receiving waters. Water quality is being ...


    By Baum Publications Ltd.

  • Plant gains efficiency by replacing vacuum-truck process

    A steel min-mill located in Portage, Ind., that produces and sells hot-rolled steel in the north central United States and Canada. The plant produces about 700,000 tons a year and employs about 400 people. On site is an electric arc furnace melt shop that produces continuous-cast steel slabs and a hot-strip rolling mill for further processing of slabs into rolled coils. The mini-mill's raw ...


    By Oil Skimmers, Inc.

  • Barium Sulfate: A Protocol for Determining Higher Site-Specific Barium Cleanup Levels

    Abstract Although different barium compounds are known to exhibit vastly different toxicities, cleanup standards for barium in soil or sediment at environmental corrective action sites are typically based on total barium concentration without regard for the specific barium compounds present. However, the Texas Commission on Environmental Quality (TCEQ) has recently agreed that the insoluble ...


  • Mercury Analysis

    Characteristics of Mercury What is Mercury? Mercury is a naturally occurring silver-colored metallic element noted for its occurrence as a liquid at room temperature and toxic to living organisms. This silvery, opaque liquid metal is very dense, yet has a high surface tension that causes it to form tiny perfect spheres in the pores of the rocks it is found in. It is ...


    By HORIBA Europe GmbH

  • Internal Auditing for Compliance & EMS Performance

    Many companies today conduct their own environmental audits to monitor compliance and keep management informed of environmental performance. Why is this important? If you ask these companies, you will generally hear this reason Risk management The liabilities resulting from noncompliance with environmental regulations can be severe, and include both monetary penalties and personal ...


    By ERS Global

  • Printing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Huge Price Increases Underway from Lamp Manufacturers: The impact of rare earth metals shortages

    Brace Yourself for Record Price Increases from the Lamp Manufacturers. ...


    By Connexion

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you