oil spill clean-up microbe Articles

  • Bioremediation of an Oil Spill

    Bioremediation is the method of choice to effectively clean up a small spill of hydrocarbons. In this case, five-hundred liters of BTEX has spilled from an above ground storage tank into a pasture that is located at the west edge of the Royal Roads University (RRU) grounds. The soil is classified as a Gleyed Eutric Brunisol based on recent laboratory analysis; it contains clay, but is fairly ...


  • Oil Spill Eater, Solution Oil Spillage in Niger Delta

    Oil Spill Eater II is the name of a non-toxic product which provides the means for moving oil spill response out of its 19th Century methodology into the realm of advanced technological 21st Century breakthroughs for addressing and remediating 100% of any spill in any environment.  In comparison, current response methods employed by three major oil companies - BP, Exxon and Shell - are ...

  • OSE II economic comparison to dispersants and mechanical Clean ups

    INTRODUCTION   Oil Spill Eater II is the name of a non-toxic product which provides the means for moving oil spill response out of its 19th Century methodology into the realm of advanced technological 21st Century breakthroughs for addressing and remediating 100% of any spill in any environment. In comparison, current response methods employed by three major oil companies - BP, Exxon ...

  • Solution blooming for fracking spills?

    Blooming salts may clean up after brine spills North Dakota's oil boom can have a salty side-effect. Wastewater from oil drilling and hydraulic fracturing – or fracking – is often laden with salts and can spill, contaminating soils. In 2014, for example, 42 such brine spills per week, on average, were recorded in North Dakota. Brine spills introduce so ...


    By American Society of Agronomy

  • Nanobite remediates boyne river oil spill - Case study

    On the 6 September 2007, an oil spill from a fuel dump leaks into the beautiful Boyne River, County Louth, Ireland. Local wild fowl and their nesting areas are endangered, as is the local water supply. The coastguards deploy conventional booms to contain the spill but decide against the use of conventional chemical detergents because of the obvious damage to flora and fauna. ...


    By Slick Solutions

  • 93% of Oil from Railway tracks remediated - Case study

    Railway engines are predominantly diesel and as such  they discharge large volumes of oil, diesel and hydraulic fluids as they operate. These hydrocarbons contaminate the railway lines, stations and sidings on which the engines operate. For many years the hydrocarbon discharges have been ignored, with the tracks and surrounding lands becoming heaving contaminated. However, new ...


    By Slick Solutions

  • 99% of Oil from Leaking tanks remediated - Case study

    Spills and leaks from domestic and commercial oil tanks are a very common occurrence, caused either by the refilling of tanks or as the result of leaks. Very  often old metal tanks corrode and start leaking oil onto the ground around the tank. Also the tanks themselves become covered in dried hydrocarbons and become significantly discoloured, even black. Spilled oil can seep into the ground, ...


    By Slick Solutions

  • Nanobite Protects Sea Life from Oil Pollution - Case Study

    Oil pollution at sea can have devastating consequences for sea life – especially seabirds. When their feathers get covered in crude oil, they are unable to fly and death is almost certain. ...


    By Slick Solutions

  • The Bioremediation Process

    Bioremediation allows natural processes to clean up harmful chemicals in the environment. Microscopic 'bugs' or microbes that live in soil and groundwater like to eat certain harmful chemicals, such as those found in gasoline and oil spills. When microbes completely digest these chemicals, they change them into water and harmless gases such as carbon dioxide. In order for microbes to clean up ...


  • Types of bioremediation and their modes of action

    An Urgent Call for Change in U.S. Oil Spill Response With Bioremediation Agent Type EA* bearing out as a workable first response alternative to the use of chemical dispersants, contrasting evidence has become even clearer that dispersant use has been a huge failure. Dispersants have proven to be an inadequate response method with more and more studies showing an ...

  • Understanding and Monitoring Hydrocarbons in Water

    Untitled Document 1. Introduction Oil contamination continues to be a very hot topic, due largely in part to recent catastrophic events with shipping ...


    By Arjay Engineering Ltd.

  • Nanobite Treated Contaminated Water – Fit to Drink! - Case study

    In 2010 the US Environmental Protection Agency, US Coast guard and BP Oil company invited Unirem Incorporated, the manufacturer of Nanobite Powder, to do an encapsulation test on crude oil polluted waters in the Gulf of Mexico. Nanobite Powder is the European trade name for a bio-remediation accelerator known in the USA as PRP (Petroleum Remediation Product). Nanobite Powder was ...


    By Slick Solutions

  • Tiny materials in countless products raise big questions for environment and health

    Nanotechnology opens a universe of possibilities — but also creates a world of unknowns. In recent years, efforts to develop the Next Big Thing — whether in medicine, computer technology, pollution prevention or high-performance materials — have turned to some really, really small things: nanomaterials. Working at the ...


    By Ensia

  • 99% of Interceptor contamination remediated - Case study

    What is an Interceptor Tank? An interceptor tank is a trap used to filter out hydrocarbon pollutants from rainwater runoff. It is typically used in road construction and on petrol station forecourts to prevent fuel contamination of the water table via runoff. Petrol interceptors work on the premise that some hydrocarbons such as petrol and diesel float on the ...


    By Slick Solutions

  • Nanobite bioremediates a Contaminated harbour - Case study

    When a hydrocarbon is spilled on water, it is very visible – floating on the surface, a blue green sheen clearly visible. When applied to an oil spill on water, Nanobite Liquid will not mix with the water and become diluted. Within a minute it attaches to the hydrocarbon, bonding with it and creating a matrix – an agglomerated gel- that remains on the surface and cannot sink, no ...


    By Slick Solutions

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you