oil spill system manufacturer Articles

  • Oil Smart® Spill Prevention Technology

    See Water, Inc. is a manufacturing firm that is located in San Jacinto, CA. SEE Water, Inc. designs and manufacturers water pump controls, high liquid alarms, and pump control panels, with a primary focus on the design of Oil Smart® Technology.Oil Smart Technology has the unique ability to differentiate between oil and water; the technology will automatically pump water without the risk of ...


    By SEEwater, Inc.

  • Oil Spill Eater, Solution Oil Spillage in Niger Delta

    Oil Spill Eater II is the name of a non-toxic product which provides the means for moving oil spill response out of its 19th Century methodology into the realm of advanced technological 21st Century breakthroughs for addressing and remediating 100% of any spill in any environment.  In comparison, current response methods employed by three major oil companies - BP, Exxon and Shell - are ...

  • New approach makes faster and efficient work of oil spills

    A comprehensive new study of oil’s behaviour in various sea conditions has resulted in significant advances in oil spill recovery using boom-style systems. Put into practice in DESMI ‘s Speed-Sweep Oil Spill Response (OSR) solution, the new approach speeds up oil recovery, increases encounter rates, covers a wider area in a shorter time and provides new flexibility in the choice of ...


    By DESMI A/S

  • New approach makes faster and efficient work of oil spills

    A comprehensive new study of oil’s behaviour in various sea conditions has resulted in significant advances in oil spill recovery using boom-style systems. Put into practice in DESMI ‘s Speed-Sweep Oil Spill Response (OSR) solution, the new approach speeds up oil recovery, increases encounter rates, covers a wider area in a shorter time and provides new flexibility in the choice of ...


    By DESMI A/S

  • Inland diesel spill case study

    Introduction In January 2000 an oil spill occurred in the North of England. It was estimated up to 30,000 litres of diesel fuel had escaped the fuel storage tanks of a major factory due to a burst pipe. Fortunately most of the spilled oil found its way to a nearby drainage facility owned by the local Water Authority. Due to neglect the drainage outlet pipe that feeds ...

  • How To Avoid Penalties For Not Containing Spills

    "Chemical spills can cost your company millions of dollars not to mention the bad publicity that results from suffering a spill. Every business wants to avoid the possibility of an uncontained hazardous material spill if at all possible. To do this you need a spill containment system designed for the type of hazardous materials that your handle. Safe Drain ...

  • Sustainable waste cooking oil systems supporting reuse such as Bio-fuels

    Waste cooking oil has great potential to be used as bio-fuel. What is not well known is that oil leaks carry risks of contamination and disease - proper storage is essential. OverviewWaste cooking oil is a valuable commodity reused in a variety of markets. In the United Kingdom, the developing markets for reuse of this waste oil is bio-fuel, which is fuel used for heating and diesel. ...

  • A way to skim and save: a guide to oil skimming

    Plant personnel are always looking for new tools and equipment to help them run their facility more efficiently. In many manufacturing and processing plants, oily water is present, which prevents a plant from functioning efficiently. Water has several purposes in a manufacturing or processing facility. It can be used for cooling machinery, washing down equipment or in processing. Sometimes, this ...


    By Oil Skimmers, Inc.

  • Use of the newly developed ASTM Standard F 2709 (Standard Test Method for determining nameplate recovery rate of stationary oil skimmer systems)

    Abstract The American Society of Testing and Materials (ASTM) subcommittee on skimmers recently adopted a standard methodology for measuring skimmer performance, F 2709 - . Standard Test Method for Determining Nameplate Recovery Rate of Stationary Oil Skimmer Systems. Current industry practice allows manufacturers to label skimmers with a nameplate capacity based solely on the ...


    By OHMSETT

  • Improved Oil Handling and Disposal: Rocklea Diesel Injection Service

     Background Truck mechanical workshops use large quantities of oils. Over time, there is an inevitable build up of spillages to give the traditional image of a messy, dirty workshop environment. This is not desirable when working with diesel injection systems. A high level of cleanliness and precision is essential. Several staff members of Rocklea Diesel Injection Service are ...


  • Oil Skimmers Inc., solves a vexing dermatitis problem in a maching shop

    One portable Cart Mount System services multiple locations Concerns about dermatology in a machine shop? This sounds more like discussing ballet on the baseball field. Dermatitis is not a general complaint among grinder operators, but finding a solution to the problem was almost as tricky as finding a prima ballerina who can pitch for the majors. The safety director can't just ...


    By Oil Skimmers, Inc.

  • Highland Tank 50,000 Gallon Oil/Water Separator installed at Con Ed Mott Haven Power Distribution Center

    Before the Brooklyn Bridge spanned the East River, before the Statue of Liberty first graced New York Harbor, and before skyscrapers rose above New York City's streets, the utility companies that would eventually become Con Edison were already building the energy infrastructure needed to fuel and sustain the city's growth. Today, Con Edison operates one of the largest and most complex — yet ...

  • Portable Infrared Analyzers Provide On-Site Measurement of Oil and Grease Levels in Hydraulic Fracturing Water

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well.  Whether the water is going to be taken off-site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water.  Waiting for remote laboratory results to determine the oil level can take several ...


    By Spectro Scientific

  • GE Leakwise Application Notes: Oil Sheen Detection -- An Alternative to On-Line PPM Analyzers

    Introduction Discharge of hydrocarbons in industrial water is restricted by environmental authorities in most countries to a few parts per million (ppm). Environmental authorities currently monitor wastewater, stormwater, and cooling water discharges from ...


    By GE Analytical Instruments

  • PSC’s “Fresh Start” Environmental Management System Uses Online Regulatory Content to Assure Compliance

    “PSC solves clients’ toughest environmental and industrial services challenges with the industry’s most qualified people, state-of-the-art technologies and customized service programs.” This is the mission statement of PSC Industrial Outsourcing LP – headquartered in Houston, TX with more than 2,000 employees at 100 locations across North America. PSC services ...


    By IHS

  • Application of the American Society of Testing and Materials’ (ASTM) New Skimmer Test Protocol

    Abstract The American Society of Testing and Materials (ASTM) subcommittee on skimmers recently adopted a standard methodology for measuring the nameplate capacity for a given skimmer system. Current industry practice allows manufacturers to label skimmers with a nameplate capacity that may bear little relationship to the ability of the skimmer, as a system, to recover oil. Manufacturers ...


    By OHMSETT

  • Reducing coal plants effluent discharge and waste pit volumes

    The OSEI Corporation manufactures Oil Spill Eater II a first response bioremediation product that utilizes natures own process to convert hydrocarbon contaminants to CO2 by speeding up natures process to remediate hydrocarbons in a matter of days or weeks compared to waiting decades, reducing the time toxic hydrocarbons can adversely effect the environment. OSE II can quickly ...

  • New Zealand enhances response capability

    The partnership between Maritime New Zealand and DESMI Ro-Clean dates more than 20 years. At that time DESMI Ro-Clean supplied RO-BOOM1500 and Weir Skimmers into New Zealand for their National Oil Spill Response, all of this equipment is still in good operational condition. June 2015 Maritime New Zealand took delivery of two SpeedSweep1500 systems to enhance their response capability with the ...


    By DESMI A/S

  • OSE II economic comparison to dispersants and mechanical Clean ups

    INTRODUCTION   Oil Spill Eater II is the name of a non-toxic product which provides the means for moving oil spill response out of its 19th Century methodology into the realm of advanced technological 21st Century breakthroughs for addressing and remediating 100% of any spill in any environment. In comparison, current response methods employed by three major oil companies - BP, Exxon ...

  • Q-PAC® supports biological growth for BOD reduction

    Patented Bioreactor uses Q-PAC Randomly Packed Media in Application of Specific Bacterial Cultures for Treating High Strength Industrial Waste for BOD and Odor Reduction in a Cheese Manufacturing Plant A cheese manufacturer in Upstate New York with one three million gallon lagoon is testing a bioreactor (TVTBIO 32) from TVT US Corporation. The concept is essentially the same as bacteria eating ...


    By Lantec Products, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you