oil-water separator Articles

  • Tetrapak, Alfa Laval, Westfalia, Cream separators and Sialex®Ring - Case Study

    Tipperary Co-operative, use Sialex®Ring to help control "Scaling" on Plate Heat and Shell and Tube heat exchangers on their " hot water circuits". A further area suitable to benefit from Sialex® is in the Cream separators. These devices are prone to "Scale" build up on flushing jets. Cleaning requires did-assembly and cleaning. This can occur several times during a year. Platetek ...


    By Phoenix Ring Manufaktur UG

  • Oil/Water Separation Technology

    Oil skimmers are simple, dependable and effective tools for removing oil, grease and other hydrocarbons from water. They usually pay for themselves within a few months. In order to ensure the oil skimmer you choose is right for your ...


    By Abanaki Corporation

  • Oil Water Separation

    An industrial facility imports oily wastes and separated them using a thermal process. The process raises the oil water temperature to 180 degrees F and uses insulated tanks to obtain an oil/water split. The facility had a 3-day workweek processing 100-200K gallons/day and then maintenance of the equipment the rest of the workweek and often weekend(s). The majority of the work was keeping the ...


    By Integrated Engineers Inc.

  • Oil Water Separator Maintenance

    Oil water separators (OWS) can be co$tly to maintain, $20,000 or more on average per cleaning and if not properly managed, can be very expensive conduits of pollution. Have you taken steps to minimize the effects and consequences on your operating co$t? When was your facility’s last OWS maintenance ...

  • Oil Recycling - Case Study

    The problem: Waste oil recycling contributes very much to climate protection through (CO2) energy saving. Compared to the production of base oil the re-refining of waste oil uses 34 % less resources. In the sixties the German government was subsidising the re-refining of waste oil. Because of that the use of waste oil as a fuel was neglected. The used oil re-refining is the ...


    By Dirk European Holdings LTD

  • Separation

    Introduction: Ex situ separation can be performed by many processes. Gravity separation and sieving/physical separation are two well-developed processes that have long been primary methods for treating municipal wastewaters. Magnetic separation, on the other hand, is a much newer separation process that is still being tested. Gravity Separation Gravity ...

  • Basic Oil Water Separator Design

    A description of the theory behind oil water separators and how they work. Explains Stokes Law, the factors within Stokes Law and how each one of them effects the performance of an oil water separator. Provides a brief history of how oil water separators were developed and the importance of droplet distribution to performance of an oil water separator. Provides a description of laboratory trials ...

  • The Importance of Dewatering

    With spring comes two things: the onset of construction season for most of our country and rain- lots and lots of rain. The unpredictability of storms and the amount of rainfall is all a guessing game.  Jobsites flood, work stalls and projects get delayed. Rain makes it hard to keep dry and on-schedule. What’s the solution? Dewatering is a technique used to control ...


    By Pac-Van, Inc.

  • Rotary valve maintenance: preventing operating problems

    Preventing operating problems by maintaining your rotary airlock valve Even though a rotary airlock valve is a relatively simple device, you have to maintain it properly to ensure it performs dependably. Proper maintenance will provide twin long-term dividends: better valve performance and smooth conveying system operation. First, know your valve inside and out. Maintenance ...


    By Wm. W. Meyer & Sons, Inc.

  • Atomic Layer Etching – Changing the Art of the Possible

    The society of vacuum coaters (SVC) deserves to be better known. It was founded in 1957 during a surge in the use of vacuum coating techniques such as sputtering and evaporation. The techniques go back a very long way: that man Edison filed a patent for coating phonograph cylinders in 1892 (It will never catch on). Did you know that the shiny surface inside your crisp packet is a vacuum ...


    By Oxford Instruments plc

  • Freytech oil water separators in car wash applications

    Knowing that oil can get into the reclaim water, David F. Roberts, the President of Freytech Inc., recommends the use of an enhanced coalescing oil water separator. “Even trace amounts of oil in the recycled water can diminish the quality of the wash,” he said. “An ‘oil trap’ is not enough since it is simply a tank with baffled walls which does trap some of the oil ...


    By Freytech Inc.

  • Not all oil water separators are created equal

    Efficiency is meaningless unless engineers and maintenance professionals are able to sustain it for a long periods of time. This webinar addresses three major questions: How do I prevent my company from incurring fines and citations? How do I increase the time between maintenance/cleaning schedules and stMl produce satisfactory effluent? How do I save my company money in regard ...


    By Mercer International Inc.

  • Sterile wastewater treatment with vacuum distillation

    Hygiene requirements are growing increasingly strict in many sectors, and the treatment of industrial wastewater is no exception. The vacuum distillation process in particular has to deal with the question of sterile treatment and subsequent storage of water obtained from the process. The mere possibility of reintroducing wastewater into the production process makes it imperative to prevent ...


    By H2O GmbH

  • Oiling water separator from Taiwan case study

    This buyer is from Taiwan, the boss visited us with his assistant in 2011, they want to remove the water from the Polyethylene glycol (one kind special oil), they are first time know the vacuum oiling water separator, so they stay in our company fro 2 days to visit our factory and learn the machine working principle. After carefully consider, they ordered three units TYA-50 oil purifier machine ...

  • Packaged Polymer Injection Dewatering System - Case Studies

    Case Study Number 1 Industry: Oil & Gas, Mining and Civil Waste Management Application: Treatment of Waste Drilling Fluids for Recycling Location: Brisbane, Australia Configuration: 20’ Explosion Proof HMI Dewatering System with VFD Driven EE-1448HD Centrifuge. Objective: Wastewater Treatment Sludge Dewatering in Order to Facilitate Landfill ...


    By Elgin Separation Solutions

  • Kimre Inc. LIQUI-NOMIX oil-water separators

    Liquid - liquid mixtures of contaminant oils (or organic solvents) in water (or aqueous solvents) can be separated economically and efficiently with gravity settlers or decanters. To achieve high efficiency separations, the settling unit must include a coalescing stage for removal of small droplets of oil. Kimre Inc.'s LIQUI-NOMIX coalescers provide high efficiency polishing of liquid streams and ...


    By Kimre, Inc.

  • Scrubber Removes Grease and Particulates from Air Exhaust

    Operating Issue A food-industry leader in Alabama operates several pork-sausage cookers that exhaust over 4,000 ACFM of moisture and pork grease. The operator installed Electrostatic Precipitators (ESPs) to treat the exhaust but these systems performed poorly and generated high maintenance and operating costs. Additionally, these systems were antiquated and required significant capital ...


    By Pollution Systems

  • Reverse Osmosis and Nanofiltration Membrane Filtration Systems: Common Problems and How to Fix Them

    Reverse osmosis (RO) and nanofiltration (NF) are membrane filtration technologies that are designed to remove solute ions and molecules from a pretreated liquid stream. Well-designed RO/NF units are compact and demand relatively little maintenance, making them an attractive alternative to conventional treatment trains. Even despite the merits of today’s efficient RO/NF technologies, it pays ...


    By SAMCO Technologies, Inc.

  • Western gateway storage company first to save with Evapcold - Case Study

    The best solution for freezer and cooler applications Western Gateway Project Specifications Equipment: (2) LCR-060P-L20-2H-W Evapcold Units (2) ATWB 9-7K12 Fluid Coolers Capacity: 70 TR per LCR Unit x (2) = 140 TR max capacity Charge: 290 lbs. NH3 per LCR Unit x (2) = 580 lbs. NH3 vs. 3500 lbs. NH3 ...


    By Evapco Inc.

  • Oil Skimmer makes oil/water separator more efficient

    Industrial facilities depend on oil/water separators to separate oil from its waste water. While oil/water separators are a helpful component to a plant's wastewater system, oil/water separators traditionally do not provide an efficient method of removing oil once it has been separated from the waste stream. Traditionally, the separator industry has either used overflow skimmer pipes or weirs, or ...


    By Oil Skimmers, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you