online cooling water monitoring Articles

  • Monitoring once through cooling water - Case study

    The Situation Power plants and paper mills use service water loops and mill water loops respectively for the cooling of lubricating, hydraulic, turbine and transformer oil.  These cooling systems feature large, recirculating volumes of water which are treated with biocides, dispersants, and corrosion inhibitors. By comparison, refineries often ...

  • Monitoring Phenol in Water

    The Situation A plant located in the eastern United States manufactures phenolic resin for applications in plastics molding. This plant uses well water for cooling its reaction process and then discharges the water into a local creek. A leak in the reactor and associated cooling equipment would cause phenol and phenolic compounds to contaminate the cooling water. Such a leak could ...

  • Field monitoring and numerical modeling as tools in effect-evaluation of waste heat and chlorination byproducts via cooling water discharges

    Power plants and other industrial facilities apply cooling water to remove waste heat from their condensers and heat exchangers. These industries are obliged to predict the thermal and environmental effects on the water bodies on which the discharge takes place in order minimize negative impact on aquatic organisms. The general approach of EC Water Framework Directive acquires the evaluation of ...


    By Sweco Nederland BV

  • Integrated process control for recirculating cooling water treatment in the coal chemical industry

    This work focused on the integrated process of the recirculating cooling water (RCW) treatment to achieve approximate zero emission in the coal chemical industry. The benefits of fractional and comprehensive RCW treatment were quantified and qualified by using a water and mass balance approach. Limits of cycle of concentrations and some encountered bottlenecks were used to ascertain set target ...


    By IWA Publishing

  • Cooling Water System at Major Canned Food Producer in the United States

    Cooling operation for canning line replaces stabilized bromine and achieves greater biological control. LOCATION Tomato Canning Plant in California, USA EQUIPMENT & CHEMISTRY Vault M15 MIOX’s Mixed Oxidant Solution (MOS) PREVIOUS DISINFECTION Bromax 7.1 (Stabilized Bromine) ...

  • Case study - Water quality monitoring and weather data at Pampulha Lake-Brasil

    In 2010, OTT Hydromet's partner in Brasil,  Hexis began working with CETEC. This resulted in the installation of a buoy, equipped with an automatic profiling system, in early 2013. The project’s objective is the continuous monitoring of the lake’s water quality, with focus on improving this by the 2014 World Cup Games.  Adcon, Lufft and OTT technologies (Hydrolab DS5X ...


    By The OTT Hydromet Group

  • Radiation Water Monitor in Real-Time and Continuous at Jefferson NL 2006

    Jefferson National Laboratory is a high tech laboratory located on a beautiful campus in suburban Virginia. Their research is centered on their high-energy electron accelerator. Energies generated are as high as 6 Gev continuous with currents up to 200 micro Amps. Where does the high-energy accelerator beam go after smashing atoms in the experimental sample? It impacts into a tank of purified ...


    By Technical Associates

  • Performance monitoring & troubleshooting with a new individual condenser tube circulating water flow and fouling (ClA/FF) meter - case study

    Introduction Midwest Generation Joliet Station in Illinois has two coal-fired units, Unit 7 and Unit 8. Roth 550 MW units are located on the Des Plaines River and have been in operation since 1963-1964. The circulating water system is a once-through system comprised of a bar rack, traveling screens, circulating water pumps and reversible condensers. The original condenser tubes on Unit ...


    By Intek, Inc.

  • Analox case study: Monitoring oxygen at Cranfield airfield

    Introduction For personnel safety, monitoring of oxygen levels was required as part of an experimental field campaign based at Cranfield airfield. This experiment was undertaken by researchers in the atmospheric physics group at Imperial College London. The researchers are interested in measuring Far-infrared radiance fields in the atmosphere ...


    By Analox Sensor Technology

  • Monitoring leaks in Heat exchangers - Case study

    The Situation A California refinery produces xylene for use as commercial product and a precursor for petrochemical manufacturing. A primary component to the production of xylene is the isolation and purification of the chemical from a complex mixture of petroleum hydrocarbons. Steam based heat exchangers are used to process the xylene. Inherent to the design and rough duty heat ...

  • Monitoring heat exchanger leaks in Paper plant - Case Study

    The Situation A paper plant in the Eastern United States uses 500 gallons per minute filtered pond water for cooling lubricating oil in its paper line. The resulting warmed water is diverted to an onsite pond. Because the water is used to cool lubricating oil, the plant could not reuse the water in its pulping process for fears of possible oil contamination of ...

  • Efficient Waste Water Treatment

    Clean drinking water is an essential need of mankind. Often surface water like rivers or lakes is used as drinking water source. To prevent these resources from pollution the effective treatment of waste water is a must. For example in China 75% of discharged waste water is coming from pulp and paper, textile and dyeing industries. To run a waste water treatment plant in the most efficient way ...


    By J.V. Niebergall CDH

  • LIMS and the Automation of the Water Lab

    (Reproduced by permission from Laboratorium Magazine) Europe’s most modern water lab is located in Leeuwarden, in the Netherlands. Vitens made a big splash when it brought this modern building, with its transparent design, into operation in January 2005. Many colleagues from Dutch and foreign labs are eager to visit this installation, where water control samples are routed automatically with the ...


    By STARLIMS Corporation

  • 100 Simple Ways To Save Water

    To improve water conservation install a rain sensor, it turns off your irrigation when it rains. Use a weather-based controller. The use of smart controllers can reduce water usage 24% a year on average. Learn about available rebate programs ...


    By Jain Irrigation, Inc

  • ASTM Standards Help Meet Need for Clean Water

    The new ASTM Water Portal provides a single access point to standards and related information about ASTM International’s diverse committees working to protect and monitor this vital global resource. Clean and safe water is the underpinning of the quality of life for people around the world. Global economies depend on water, whether it’s to support the manufacturing of goods ...


    By ASTM International

  • "Non-Chemical Water Conditioning at Schick: A Pollution Prevention Case Study"

    Untitled Document Overview Since 1994, the Schick company of Milford has ...


    By Dolphin WaterCare

  • Texas refinery identifes the source of boiler contamination and restores production using on-line steam condensate analyzer

    Background A major refinery in Texas, USA, recently experienced steam condensate contamination and major fouling of a boiler resulting in damage that led to an unplanned shutdown. The financial impact of the damaged boiler, unscheduled maintenance and loss of production drove a review of current condensate monitoring techniques. The review panel concluded that current methods of ...


    By GE Analytical Instruments

  • New gas calibration method eases TOC analysis

    LAR Process Analysers AG of Berlin,  Germany expanded the range of feaiures of its measuring device QuickTOC, which facilitates the monitoring of ultra pure and cooling water, boiler feed and condensate measurement, and industrial wastewaters. For many years, the Berlin company lias been developing, high quality measuring devices and processes for the TOC analysis of condensates and boiler ...


    By LAR Process Analysers AG

  • Case study - E.ON Power Plant Nuremberg

    Water level, water flow and discharge are monitored at two inflows of the E.ON electricity power plan Franken I, using the OTT SLD, with horizontal Doppler-flow sensors. The purpose of this measurement is to optimize the operation of the plan which partly covers the demand for electricity in the conurbation of Nuremberg-Fuerth-Erlangen.  OTT technologies for this project have been in use ...


    By The OTT Hydromet Group

  • Application notes: TOC analysis in a chemical laboratory

    What You Need to Know Analytical laboratories in the chemical industry are routinely tasked with monitoring organics in water across a wide range of applications. For example, organic carbon analysis is being used to: Monitor plant storm water and wastewater Test for condensate system or boiler integrity Enhance cooling and make-up water quality ...


    By GE Analytical Instruments

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you