online toc analyzer Articles

  • Real Time TOC Analysis in Steam and Condensate

    Executive Summary Steam in petro/chemical plants could be contaminated with hydrocarbons (TOC = Total Organic Carbons) from various sources. In any case this is a sign for defects in the process, whether it they occur in the heat exchanger, the blow down vessel, the condensate recovery or other parts of the system. Conventional solutions to monitor such contaminations use TOC- ...


    By JCT Analysentechnik GmbH

  • TOC monitoring upstream of paper mill wastewater treatment facility using online TOC analyzer

    At wastewater treatment facilities of various types of manufacturing plants, pollution load monitoring (upstream monitoring) is becoming increasingly important to ensure appropriate and stable operation and water pollution accident prevention. Pollution load varies depending on the operating status of the plant, so continuous monitoring is essential. Continuous and stable ...

  • Online analysis of TOC, TNb, TP, and COD in water

    The control of waste water treatment plants is of special importance - from an ecological as well as economic point of view. The most common water parameters for controlling and optimization are the total organic carbon (TOC), chemical oxygen demand (COD), total nitrogen bound ( ...


    By LAR Process Analysers AG

  • Case study - Sievers 900/5310 C series TOC analyzers — calibration

    Synopsis The Sievers* 900 and 5310 C Series TOC Analyzers incorporate a number of new features and options designed toimprove the accuracy and linearity of the TOC measurements. Three new calibration options are available in the Analyzers: automatic conductivity offset, automatic TOC autozero, and single- or multipoint calibration of the TC and IC channels Conductivity ...


    By GE Analytical Instruments

  • New gas calibration method eases TOC analysis

    LAR Process Analysers AG of Berlin,  Germany expanded the range of feaiures of its measuring device QuickTOC, which facilitates the monitoring of ultra pure and cooling water, boiler feed and condensate measurement, and industrial wastewaters. For many years, the Berlin company lias been developing, high quality measuring devices and processes for the TOC analysis of condensates and boiler ...


    By LAR Process Analysers AG

  • Application notes: TOC analysis in a chemical laboratory

    What You Need to Know Analytical laboratories in the chemical industry are routinely tasked with monitoring organics in water across a wide range of applications. For example, organic carbon analysis is being used to: Monitor plant storm water and wastewater Test for condensate system or boiler integrity Enhance cooling and make-up water quality ...


    By GE Analytical Instruments

  • Case study - Cost-saving solutions using Sievers InnovOx TOC analyzers - optimizing organic loading

    Cost Concern  A company’s inability to recognize real-time organic loading changes in their wastewater treatment plant could result in excessive charges from the local water utility. Company Challenge A production facility located in the U.S. Midwest currently controls the organic loading in their wastewater’s chemical treatment ...


    By GE Analytical Instruments

  • GE Leakwise Application Notes: Oil Sheen Detection -- An Alternative to On-Line PPM Analyzers

    Introduction Discharge of hydrocarbons in industrial water is restricted by environmental authorities in most countries to a few parts per million (ppm). Environmental authorities currently monitor wastewater, stormwater, and cooling water discharges from ...


    By GE Analytical Instruments

  • City of Houston Total Organic Carbon - Case Study

    ABSTRACT The City of Houston, Texas has been aware of the implications that current and pending regulatory standards would have on the operation of their four surface water treatment facilities. In particular, the City has closely monitored changes in regulations related to enhanced coagulation, total organic carbon (TOC) removal, and disinfection by-products (DBP) reduction. The ...


    By TOC Systems, Inc.

  • Organics Monitoring: A Practical Guide

    Preventing product loss, lowering waste treatment costs, and reducing system maintenance and energy consumption through organics monitoring in the chemical, refining, food, and wastewater treatment industries. Summary Process water and steam condensate contamination includes organic, inorganic, and biological components. Sources of organic contamination include process ...


    By GE Analytical Instruments

  • Case study - GE and Severn Trent Services work together to gain UKAS accreditation for drinking water and waste waters

    Background Severn Trent Services (STS) is a leading provider of analytical services with a network of five laboratories and two service centers across the UK and Ireland. For over 20 years, STS has provided various analytical, sampling and monitoring services to meet customers’ requirements in areas such as potable water, waste water, groundwater, legionella, contaminated land, ...


    By GE Analytical Instruments

  • Optical Assessment of Dissolved Organic Carbon

    Natural organic matter is present in all sources of drinking water. When chlorine is used for drinking-water treatment, a portion of the natural organic matter reacts to form halogenated compounds, referred to as disinfection by-products (DBPs), some of which are regulated by the USEPA due to their health effects. The implementation of stricter drinking-water quality regulations for DBPs has ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you