online water analyzer Articles

  • Online Analyzers Improve Control of Chloramination Processes in Milwaukee

    The Milwaukee Water Works is a national leader in providing high quality drinking water and monitoring water quality. Since 1998, it has invested $227 million in its infrastructure, from treatment plants to distribution systems, to ensure high quality drinking water and reliable supply. The Milwaukee Water Works treats Lake Michigan water with Ozone gas as a primary disinfectant because it ...


    By ASA Analytics

  • Online Process Analyzer Installed at F.J. Horgan WTP to Monitor Chloramination

    Construction was completed on the City of Toronto's F.J. Hor-gan Water Treatment Plant in 1979, more than 60 years after chloramine had first been used to disinfect drinking water in an Ottawa plant. By then there was little debate about the benefits of chloramination and it was incorporated into the new plant's design as part of the disinfection process. Chloramine is more stable than free ...


    By ASA Analytics

  • Curren Hits the Bull`s Eye Using Online Process Analyzers

    Howard F. Curren Advanced Wastewater Treatment Plant improved its efficiency by upgrading to online process monitoring and control. The Howard F. Curren Advanced Wastewater Treatment Plant is one of the largest nitrification/denitrification filter plants in the world with a design capacity of 96 million gallons per day average daily flow. It serves about 110,000 accounts in the City of Tampa and ...


    By ASA Analytics

  • Online analysis of TOC, TNb, TP, and COD in water

    The control of waste water treatment plants is of special importance - from an ecological as well as economic point of view. The most common water parameters for controlling and optimization are the total organic carbon (TOC), chemical oxygen demand (COD), total nitrogen bound ( ...


    By LAR Process Analysers AG

  • Online Odors Monitoring in Waste Water Treatment Plants

    Odors are very distinct air contaminants as they generate nuisances (see note at the end). The factors playing a role in the determination of odor annoyance are : odor concentration and intensity, frequency, appreciation, duration, synergy and location. Chromatotec proposes an automated solution to well identify the origin and the level of odors. Technology Description We offer a ...


    By Chromatotec Group

  • Complete online monitoring solution for Waste Water Treatment Plant

    Due to the increasing number of requests for the monitoring of waste water treatment plant atmosphere, Chromatotec® has designed a specific analytical solution for sulfur and nitrogen compounds analysis. For more than 25 years, Chromatotec® has proven its value and expertise in measuring and recording sulfur concentrations in waste water treatment plant. Chromatotec® has completed its ...


    By Chromatotec Group

  • TOC analyzer for airports

    During winter, de-icing processes at airports necessitate storm water and de-icing water management. Especially due to adhesive (sticky) substances, strongly fluctuating concentrations and a lot of chemicals, the monitoring systems itself must be tailor-made to fight this water analysis challenge. LAR 's ...


    By LAR Process Analysers AG

  • TOC monitoring upstream of paper mill wastewater treatment facility using online TOC analyzer - Case Study

    At wastewater treatment facilities of various types of manufacturing plants, pollution load monitoring (upstream monitoring) is becoming increasingly important to ensure appropriate and stable operation and water pollution accident prevention. Pollution load varies depending on the operating status of the plant, so continuous monitoring is essential. Continuous and stable ...

  • Validation of Salt Water Disposal Well Treatment Plants with Handheld Oil in Water Sample Analyzer

    Salt Water Disposal (SWD) well operators often dispose a substantial volume of oil inadvertently when injecting salt water, thereby losing the opportunity to sell the oil on the market and potentially reducing the ability to inject water in the well. Injection facilities are typically operated with minimal instrumentation or system optimization, which means the operators don't know how much, or ...

  • A new online monitoring and management system for accidental pollution events developed for the regional water basin in Ningbo, China

    Due to urgency of the accidental pollution events (APE) on one side and the variability in water quality data on the other side, a new online monitoring and management system (OMMS) was developed for the purpose of sustainable water quality management and human health protection as well. The Biological Early Warning System (BEWS) based on the behavioral responses (behavior strength) of medaka ...


    By IWA Publishing

  • Assessing performance of on-line nitrate analyzers

    Traditionally, activated sludge processes were designed to remove organics and suspended solids from wastewater. The justification for including nitrogen control in wastewater treatment facilities began with the need to protect receiving waters from the increasing problem of eutrophication and hypoxia (low levels of dissolved oxygen in bottom waters, generally less than 2 mg/l). One of the ...

  • Myths and Truths About Multi-Input Analyzers

    Key Words multi-input analyzer, water quality, instrumentation, water, waste water, process industry, efficiencies, digital controllers Today's process world is a challenging one. Plant managers, metrology labs, and maintenance workers are constantly asked to improve their process efficiencies and output while at the same time seeing their budgets, manpower, and workforce ...


    By IC Controls Ltd.

  • Online Chemical Oxygen Demand for Treatment Optimization - Case Study

    A wide variety of products are made in the chemical and pharmaceutical manufacturing industries, that require large volumes of chemicals, materials, and substances that are used throughout process operations. Waste water from these facilities typically include contaminants, toxins, nutrients, and organic content that presents challenges with regards to treatment. A major UK based chemical ...


    By MANTECH Inc.

  • Water Quality Models

    ' In order to determine the impacts of a particular discharge on ambient water quality, it is usually necessary to model the diffusion and dispersion of the discharge in the relevant water body. The approach applies both to new discharges and to upgrading of existing sources. This note provides guidance on models that may be applicable in the context of typical Bank projects.' Introduction ...


    By The World Bank

  • Use of online nutrient monitoring for automatic aeration and nitrate recycle pump control

    The Northside Wastewater Treatment Plant (WWTP) in Kinston, NC was expanded and upgraded in 2006 for biological nutrient removal (BNR) to meet limits of 3 mg/L total nitrogen (TN) and 1 mg/L total phosphorus (TP). In addition to the traditional approach of controlling the blowers based on dissolved oxygen (DO) readings, the City decided to implement an aeration basin blower control system using ...

  • Phosphorus control protects surface waters

    Phosphorus is the decisive factor for excessive algae and plant growth in water bodies, that’s why quality standards require reductions in the amount of phosphorus released from wastewater treatment plants into rivers and lakes. In recent years, the outlet limit values have not only been reduced on national levels. Depending on the vulnerability of ecosystems, especially low target values ...


    By Endress Hauser AG

  • Pasco County Uses Total Life Cycle Costing to Select Chloramination Analyzers

    Pasco County, Florida Water Utilities serves its customers with water from its 58 permitted wells blended with the water supplied by its large regional supplier, Tampa Bay Water. In 2002 Tampa Bay Water converted to monochloramine disinfection because of its advantages over free residual chlorine. Monochloramine is more stable and better extends the disinfectant residual throughout the ...


    By ASA Analytics

  • Efficient Waste Water Treatment

    Clean drinking water is an essential need of mankind. Often surface water like rivers or lakes is used as drinking water source. To prevent these resources from pollution the effective treatment of waste water is a must. For example in China 75% of discharged waste water is coming from pulp and paper, textile and dyeing industries. To run a waste water treatment plant in the most efficient way ...


    By J.V. Niebergall

  • Monitoring Phenol in Water - Case Study

    The Situation A plant located in the eastern United States manufactures phenolic resin for applications in plastics molding. This plant uses well water for cooling its reaction process and then discharges the water into a local creek. A leak in the reactor and associated cooling equipment would cause phenol and phenolic compounds to contaminate the cooling water. Such a leak could ...

  • Surface Water Monitoring - Case Study

    Safe operation of a Water Treatment Plant (WTP) requires careful monitoring of the water supply influent to the plant, as a guard for any substances entering the treatment works that could negatively impact treated water quality in the distribution system. One aspect of water quality that has recently garnered more attention from authorities and utilities is Natural Organic Matter (NOM), which ...


    By MANTECH Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you