open path gas sensor Articles

  • Using Open Path TDLAS CO2 Sensors for Carbon Capture and Storage Projects

    Public confidence in CCS projects worldwide is not very high. Many believe that CCS is not permanent storage, and at great expense to govermnents who are funding these projects. Effective monitoring and verification programs could go a long way to improve public perception.  Our Spectra-1 open path TDLAS gas sensor has shown very high accuracy in monitoring ambient CO2 levels. Better than ...


    By PKL Technologies Inc.

  • A Comparison of Point Sensors and Open Path Monitors For Toxic Gas (esp. HF) Monitoring

    Point Sensors Ion Mobility Spectroscope (IMS) – a gas sample is ionized by a radioactive source (Ni63). Differences in ion drift under the influence of an applied electric field produce a spectrum that is dependent on the mass, charge, and shape of the component ions. The detector signal and strength is tuned to the drift time of the ion of interest (in this case HF) and signal strength is ...


    By Boreal Laser Inc.

  • Cerex introduces the new AirSentry FTIR Open Path Analyzer

    Cerex Monitoring Solutions is pleased to announce the release of the third generation model AirSentry FTIR multi-gas open path FTIR analyzer. The decision was made to fully redesign the analyzer to take full advantage of advances in hardware and software technology. The third generation design represents a full reconfiguration of the instrument. Goals were to reduce initial and operating costs ...

  • Is technology the path to a lower carbon future?

    Advances in technology will keep energy supplies plentiful and affordable – enough to meet projected demand many times over — and help pave the way to a lower carbon energy mix, according to data published today in the BP Technology Outlook. “Technology opens up a whole range of possibilities across the energy sector,” said Bob Dudley, BP Group Chief Executive. “It ...


    By GLOBE Foundation

  • Upgrading from Pellistor Gas Sensors to Infrared Technology

    In this article Andy Avenell, Crowcon’s Fixed Systems Product Manager, considers the shift towards infrared (IR) gas sensor technology in the oil and gas industry. Abstract Flammable gases and vapours can present considerable dangers in many industrial applications, none more so than the processes involved in extracting, transporting and processing oil and gas. Fast and reliable ...

  • Safety Systems Depend on Reliable Field Sensors (Emphasis on Fire and Gas Detectors)

    Abstract Because not all hazards are the same, identifying and quantifying the hazard is the starting point in choosing sensing technology. Not all detectors are the same, and they should be selected according to their ability to detect the hazard. This paper gives a broad summary of technologies that provide users reliable responses to hazardous conditions, that minimise false ...

  • TDLAS Gas Detection Instrumentation

    PKL Technologies Inc. manufactures tunable diode laser (TDLAS) based gas detectors and monitors. Spectra-1 open path gas sensors are used in a variety of environmental and safety remote sensing applications. Spectra-1 gas sensors have been designed in a compact, easy to use, robust and portable format. Spectra-1 has been developed using proprietary hardware and software, to produce a low cost ...


    By PKL Technologies Inc.

  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • FTIR resolution requirements for industrial gas analyses

    FTIR Spectroscopy FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epitreatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D faciltities, FTIR is applied to combustion ...


    By CIC Photonics, Inc.

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • Detecting Gases: What You Can`t Smell Can Hurt You

    Walking through a drill-site area, a worker smells rotten eggs and stops tor a minute or two to assess where a gas leak might exist. Rubbing his itchv eves as he investigates further, he notices that he no longer smells the tell¬tale hydrogen sulphide odour. He does not realize that the gas has deadened his olfactory senses and unless he leaves the area within seconds, he could lose ...

  • Indoor Air Quality Myths Debunked

    Today’s buildings, whether it is a home, office, manufacturing plant, hospital, etc., are more energy efficient; however, they also foster a potentially harmful environment. Indoor Air Quality (IAQ) has become a rising concern in the HVAC industry. Poor IAQ can cause a number of health issues such as, allergies, dryness and irritation to the eyes, nose, throat, and skin. It can also cause ...

  • Smart Series-Odor Management

    Tackling odors at composting facilities is a manageable task made simpler by inventorying and treating all sources and tapping into technology advances. Perhaps one of the most difficult realities that had to be faced 15 to 20 years ago by the composting universe is that the phrase, “odor-free” - at least when it comes to composting - is probably an oxymoron. Feedstocks that biodegrade within the ...


    By BioCycle Magazine

  • Could food shortages bring down civilization?

    “In early 2008, Saudi Arabia announced that, after being self-sufficient in wheat for over 20 years, the non-replenishable aquifer it had been pumping for irrigation was largely depleted,” writes Lester R. Brown in his new book, Plan B 4.0: Mobilizing to Save Civilization (W.W. Norton & Company). “In response, officials said they would reduce their wheat harvest by one eighth each year ...


    By Earth Policy Institute

  • The number one thing we can do to protect Earth’s oceans

    Marine governance favors consumption and commerce over conservation. Here's what we can do about it. When New England fishers complained of working harder and harder to catch fewer and fewer fish, Spencer Baird assembled a scientific team to investigate. Though a fishery failure would once have seemed inconceivable, Baird wrote in his report, “an alarming decrease of the ...


    By Ensia

  • Fires at Composting Facilities: Causes and Conditions

    The subject of fires at composting facilities is a bad news/good news situation. The bad news is that fires are more common than we realize. Ask a group of facility operators if they have had to deal with a fire, and the majority will quietly admit they have. The good news is that we don’t realize that fires are fairly common at composting facilities. Most are neither frequent nor destructive ...


    By BioCycle Magazine

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you