optical oxygen sensor Articles

  • Tech Tip: Deploying Sea-Bird CTD in Ice

    Large numbers of Sea-Bird conductivity instruments have been used in Arctic and Antarctic programs. Special accommodation to keep temperature, conductivity, oxygen, and optical sensors at or above 0° C is advised. Often, the CTD is brought inside protective doors between casts to achieve this. Conductivity Cell When freezing is possible, we ...

  • Optical DO Sensors Opening Doors to Online Aeration Control

    BACKGROUNDThe benefits of using online, automated control of aeration systems using dissolved oxygen (DO) sensors are well known in the industry and have been widely documented (e.g. Olsson et al, 2005). In most wastewater treatment facilities using activated sludge, the electricity provided to the aeration system is one of the most significant operating costs and a good control system can help ...

  • Dissolved Oxygen – the discussion moves on

    Do Dissolved Oxygen Sensors need Cleaning? The re-emergence of Optical Dissolved Oxygen Sensors around 6-7 years ago generated a lively and interesting discussion which revolved around the relative merits of Optical and Galvanic Dissolved Oxygen sensors. We understand that opinions will differ, so in order to accommodate our customers preferences we are pleased to offer our OxyTechw² ...


    By Partech (Electronics) Ltd.

  • Dissolved oxygen measurements in aquatic environments: The effects of changing temperature and pressure on three sensor technologies

    Dissolved oxygen (DO) is probably the most important parameter related to water quality and biological habitat in aquatic environments. In situ DO sensors are some of the most valuable tools used by scientists and engineers for the evaluation of water quality in aquatic ecosystems. Presently, we cannot accurately measure DO concentrations under variable temperature and pressure conditions. ...

  • Analox case study: Monitoring oxygen at Cranfield airfield

    Introduction For personnel safety, monitoring of oxygen levels was required as part of an experimental field campaign based at Cranfield airfield. This experiment was undertaken by researchers in the atmospheric physics group at Imperial College London. The researchers are interested in measuring Far-infrared radiance fields in the atmosphere ...


    By Analox Sensor Technology

  • Upgrading from Pellistor Gas Sensors to Infrared Technology

    In this article Andy Avenell, Crowcon’s Fixed Systems Product Manager, considers the shift towards infrared (IR) gas sensor technology in the oil and gas industry. Abstract Flammable gases and vapours can present considerable dangers in many industrial applications, none more so than the processes involved in extracting, transporting and processing oil and gas. Fast and reliable ...

  • Sewage Treatment Plant reports success with HACH LANGE LDO

    Between 60 and 70% of the energy consumed by sewage treatment plants is used to aerate the activated sludge. Strategies aimed at reducing energy consumption are therefore usually focused on optimising the oxygen transfer into the aeration tank. All control systems are based on exact and precise measurement of the oxygen concentration. For process engineers, therefore, the issue is not whether but ...


  • LDO offers 80 % less maintenance within paper industry

    For many years there has been a strong trend towards resource conserving production in order to cut water consumption in the paper industry. Nevertheless, in 2004 an average of 9.6 litres of wastewater was generated per kilogram of paper in Germany. Several paper mills, which together account for more than 75 % of the gross production volume, use biological processes to treat their wastewater. In ...


  • In-situ quality monitoring station in Lower Saxony

    Background 'Duemmer' is a shallow lake in the south-west of Lower Saxony; through the lake flows the river 'Hunte'. The catchment area spans 426 km2. With a surface of 12.4 km2 and an average depth of 1.1 m there is a water volume of approx. 14 million m3. Large parts of the lakeside are a nature reserve and the lake is a popular local recreation area. The lake suffers from strong nutrient ...

  • A method for on-line measurement of wastewater organic substrate oxidation level during aerobic heterotrophic respiration

    A method for on-line measurement of the organic carbon oxidation level (OXC) during aerobic heterotrophic respiration in domestic wastewater was developed and tested. The method is based on batch incubation of sewer wastewater in an intermittently aerated respirometric reactor. Between aeration cycles, measured pH, dissolved oxygen (DO) and dissolved carbon dioxide (CO2) were used to ...


    By IWA Publishing

  • Gas Monitoring for Ventilation Control and Energy Management

    The growing demand for underground and enclosed parking and maintenance garages (resulting from limitations on land availability) has increased the awareness and need for proper ventilation and control systems. In addition, increased health and safety programs have only added to the concerns of toxic and combustible gases in confined or enclosed spaces. Historically, ventilation and make-up air ...


    By Arjay Engineering Ltd.

  • Reliable silica monitoring supports power station efficiency

    West Burton B CCGT is a Combined Cycle Gas Turbine power station near Nottingham in the UK. It has three open-cycle gas turbines capable of generating enough electricity for approximately 1.5 million UK homes. In common with all combustion based power stations, the CCGT has a requirement to monitor silica levels in the Plant’s water and steam processes. Sean Todd, the Plant’s Control ...

  • On-Line Nitrate/Nitrite Probes for BNR Process Control

    ABSTRACTReal time nitrogen monitoring plays an increasingly important role for the successful biological nutrient removal at wastewater treatment plants. Though traditionally dissolved oxygen has been the main process control parameter a greater understanding of the biological mechanisms and process conditions like nitrite/nitrate concentrations to achieve lower effluent values becomes necessary, ...

  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • Surface Ocean Acidification studies using Ships Of Opportunity

    Ships of Opportunity Ships of opportunity (SOOP) are used as a platform for cost-efficient collection of environmental data, Ferrybox. The SOOP network operated by NIVA cover the majority of the Norwegian coastline (from Germany (54N ) in the South to Svalbard (78N) in the North. This network is used in the national OA monitoring program. Globally, SOOPs are used for pCO2 measurements and ...


    By Franatech GmbH

  • Water quality in the Arosa Bay

    Background One of the great impediments to further development of shellfish aquaculture in the north-west region of Spain isa perception that industry expansion and tourism could have negative environmental effects on the coastal waters. Especially the bay around Villagarcia de Arosa is very famous because of its excellent areas for shellfish farming. The government of Spain is ...

  • Gas detector communication technology for offshore oil and gas platforms

    In few applications is safety as important as on offshore oil and gas platforms. Explosive hazards from hydrocarbon gases and vapours are an ever-present risk, whilst toxic hydrogen sulphide gas and depleted oxygen environments can pose significant risks to personnel. Gas detectors are therefore essential to provide dependable early warning of gas hazards. Gas detectors are permanently installed ...

  • Advanced Water Quality Techniques Course

    Abstract:The development of a strategic water quality monitoring program is based on prioritizing risks to public safety and economic reality. The development of global standardized methods and protocols for automated water quality monitoring would facilitate international communication of water quality information and comparison of standardized methods and protocols. The three primary methods ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you