optical sorting solution Articles

  • Sorting plant for paper

    Task New conception of a complete sorting plant for used paper from a collection with an averaged proportion of cardboard about 35 % to max.  45 %. Separation of the paper-cardboard mix  into the fractions paperboard, deinking and  mixed paper for the further recycling Solution The material input is divided on two lines by  a feeding conveyor ...


  • Altpapier Sortierung Dachau Gmbh – Germany - Sensor based optical sorting for paper de-inking case study

    Customer ASD - Altpapier Sortierung Dachau GmbH - are specialists in recycling of waste paper. The company produces high quality paper grades for their industry partners. Requirements The requirements are maximised gain output with the highest purities of 97% of sorted paper grades from waste paper with less than 8% de-inking loss overall. ...

  • Identification of near infrared (NIR) optical sorting good practice in the UK and mainland Europe case study

    Challenge: Previous studies have shown that standards of quality and yield achieved by NIR optical sorting facilities, such as Materials Recovery Facilities (MRFs), vary enormously across Europe To study and share examples of good practice in order to improve recovery rates and quality of materials from NIR sorting facilities Axion ...

  • Sorting plant for light packaging material, location: Italia

    Task Automation of an existing manual sorting press line for production of marketable potential recyclables out of the mix of light packagings. Solution Automatical treatment of the light packagings  by auger fillers, ballistic separators, ferrous and non-ferrous and air separators as well as optical identification discharging all troubling materials at the ...


  • Sorting plants for industrial waste, location: south of Germany

    Task Separation and sorting of industrial and building site waste as well as bulky refuses. Potential recyclables such as wood, paper, plastics, metals and aluminium shall no longer be sent to garbage incineration, but can be recycled after the sorting into different material fractions. Solution Conception and realisation of a complete  industrial waste ...


  • Sorting plant for light packaging material, location: Madeira

    Task New conception of an automatical light  packagings sorting plant for production of marketable potential recyclables, as there  are: PET, PE, bricks, FE, Aluminium, paper  and cardboard. Solution The bags with the light packagins are opened  in a bag opener. Afterwards all troubling substances are taken out. A downstream  ballistic ...


  • Action Recycling-Milwaukee Plastic Sorting case study

    Customer Action Recyclers is a rapidly growing recycling company in Milwaukee which was founded in 2005. The company now employs    more than 30 employees and owns several recycling centres. Requirements PET and PE are to be recycled from a mixed fraction (60% PE/PET and 40% other materials such as other plastics, wood, paper, etc) with a grain size ...

  • ACTIS – Russia - Glass sorting plant - case study

    Customer The headquarters of the company ACTIS, which produces new bottles for the drinks industry from waste glass collected, is located in Novocherkassk, only 30 kilometres from Rostov in Southern Russia. ACTIS emerged as a pioneer n the glass recycling industry 10 years ago. Even then, a new plant with conveyor belts, feed hopper and product bunker, washing unit and manual ...

  • TITECH sorting systems specified for UK`s most automated MRF

    Leading recycling and waste management company Viridor has developed a new Materials Recovery Facility (MRF) in West Sussex that is groundbreaking in terms of its use of automation. Viridor won the PFI Recycling & Waste Handling Contract for West Sussex in 2004. Under this 25-year agreement, the company has made a long term commitment to helping the area improve its recycling rates. The new, ...


    By TOMRA Sorting (TITECH)

  • Hungarian city makes giant leap into recycling with an advanced sorting plant - Case Study

    Settlements in the southeast region of Hungary, which previously sent all their municipal solid waste (MSW) to landfill, now have a state-of-the-art MSW sorting system near Békéscsaba that can process up to 120,000 tonnes of waste per year. The ...


    By TOMRA Sorting (TITECH)

  • Ecopark 4, Spain, trusts AUTOSORT for the efficient automation of its separation processes - Case Study

    Ecopark 4 in Hostalets de Pierola (Barcelona), part of the infrastructure of the Barcelona Metropolitan Area (AMB), uses ten of TOMRA Sorting Recycling's AUTOSORT optical separators, which currently recover 90% of sortable material. This fully automated plant has three treatment streams which process around 300,000 tons annually. Ecopark 4, located in Hostalets de Pierola (Barcelona), is a ...


    By TOMRA Sorting (TITECH)

  • Redwave - separation of transparent and white HDPE

    REDWAVE - sensor based sorting machines - optimise the separation of recyclable plastic materials: Upon customer request the separation of transparent and white HDPE bottles has been realized for the first time in a sorting plant. It is a challenging task as hardly any difference can be detected in the colour spectrum between transparent and white bottles. In ...

  • Atelier Fouesnantais, France - Case Study

    TOMRA demonstrated viability of sorting graphic paper - A French case. TOMRA’s unique application for sorting graphic paper within the recovery of fibrous or flat material fractions for selective collections has now become a hot topic in France. At trade ...


    By TOMRA Sorting (TITECH)

  • Hanbury Plastic Recycling – Stoke on Trent, UK case study

    CUSTOMER HPR Limited creates high quality plastic feedstock materials, by sorting co-mingled commercial, industrial and post-consumer waste into separated polymer streams of high purity since 2011. HPR Limited process 40,000 tonnes/year of mixed kerbside collected plastic material. SITUATION HPR were looking for a solution to sort efficiently ...

  • Upgrading of plastics with TITECH autosort 4 at Balsamo Reciclagem, Brazil - Case Study

    Balsamo Reciclagem upgraded its plant with the installation of the innovative TITECH autosort 4 optical sorter. Thanks to this equipment, the company managed to increase material processing speed and ...


    By TOMRA Sorting (TITECH)

  • SRF Refining (Solid Recovered Fuels), Austria - Case Study

    Customer Mullex-Umwelt-Sauberung-GmbH was founded in 1980 and is working in the field of waste collection, waste sorting, waste processing and waste disposal. The company operates at three locations in Styria and currently employs around 90 people. Situation The demand from the main customer of the solid recovered fuel after removal of chlorine from the SRF ...

  • Alcázar de San Juan Waste Management plant, Spain - Case Study

    The Alcázar De San Juan Waste Management Plant Now Has Four Titech Autosort Units The latest remodeling of the Municipal Solid Waste (MSW) Management Plant in Alcázar de San Juan (Ciudad Real, Spain) includes two new TITECH autosort 4 optical sorting units. Overview The Municipal ...


    By TOMRA Sorting (TITECH)

  • MacMachinery Secure Partnership with Sennebogen

    Despite the current economic climate Irish Company, Mac Machinery Limited, secures a partnership with German Enterprise Sennebogen (specialist in material handling solutions). The deal had been agreed in late 2009 and all parties are looking forward to working together to provide clients with a cost effective solution. Mac Machinery Marketing Manager, Annemarie Doohan, says that “you cannot stand ...


    By Mac Machinery Limited

  • Ideally, data should end up in the shredder - Case Study

    When new computers are needed, companies often need to delete sensitive data reliably from many thousands of old computers - a time-consuming job. Thanks to the HDS 230 hard drive shredder from HSM, Uriel Papierrohstoffe GmbH in Diez (Limburg) can provide their customers with fast and extremely secure data deletion by mechanically shredding hard drives into many particles. Andreas Uriel, the ...


    By HSM GmbH + Co. KG

  • Ideally, data should end up in the shredder - Case Study

    When new computers are needed, companies often need to delete sensitive data reliably from many thousands of old computers - a time-consuming job. Thanks to the HDS 230 hard drive shredder from HSM, Uriel Papierrohstoffe GmbH in Diez (Limburg) can provide their customers with fast and extremely secure data deletion by mechanically shredding hard drives into many particles. Andreas ...


    By HSM GmbH + Co. KG

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you