organic rankine cycle power Articles

  • Organic Rankine Cycle (ORC)

    Biogas/Heat-to-Power Application using a Dreyer & Bosse CHP power unit Location: Trechwitz, Germany Site Gross Power Output Range 500Kwe + 30-35kWe from Electratherm ORC Thermal Heat Input Range: ?375-450kWt   Hot Water Input Range:? 90-95°C ...

  • Utilizing Waste Heat For Power

    Continuous duty gen-sets provide base-load power generation in diverse applications around the globe. However, high fuel costs and engine maintenance are pain points felt by operators. A low-maintenance path to significant fuel savings and lower emissions is what the U.S. Department of Defense (DOD) had in mind when they approached ElectraTherm to integrate the company’s Green Machine waste ...


    By ElectraTherm

  • Using biogas for combined heat and power

    An integral part of the majority of anaerobic digestion facilities across the world is the CHP combined heat and power (CHP) engine. For the first time builder of a biogas plant, it is often neglected as the focus is on reducing the capital costs ...


    By Clarke Energy

  • Using biogas for combined heat and power

    An integral part of the majority of anaerobic digestion facilities across the world is the CHP combined heat and power (CHP) engine. For the first time builder of a biogas plant, it is often neglected as the focus is on reducing the capital costs ...


    By Clarke Energy

  • ElectraTherm Green Machine generates power from biomass in Italy - Case Study

    Site: Badia Prataglia, Italy Gross Power Output Avg: 46kWe Hot Water Input Range: 110°C Hot Water Flow: 10 l/s Thermal Input to the Green Machine (kW thermal): 500kWt ElectraTherm commissioned a Green Machine to generate emission-free electricity from biomass in Badia Prataglia, Italy. The facility operates a biomass boiler burning a mix of sawdust and ground up waste wood from ...


    By ElectraTherm

  • Energy and exergy analysis of a novel multigeneration system producing cooling, heating, power and pure water

    A novel multi–generation system producing power, pure water, cooling and heating is proposed and analysed in detail. The system comprises a hybrid generator-absorber heat exchanger (GAX), the Organic Rankine Cycle (ORC), the absorption heat transformer (AHT) and a desalination system. For comparison purposes, three working fluids, including R123, Isopentane and n–butane are considered in the ORC. ...


    By Inderscience Publishers

  • Case study - Heat-to-power application using a Dreyer & Bosse CHP power unit with an internal combustion engine

    Location: Trechwitz, Germany Site Gross Power Output Range 500kWe + 30-35kWe from ElectraTherm ORC Thermal Heat Input Range:  375-450kWt Hot Water Input Range:  90-95°C (118-203°F) Hot Water Flow Range:  39 m3/hour (172 GPM) Ambient Temperature: 0-15°C (32-59°F) ElectraTherm installed a Green Machine in Germany at a biogas power generation ...


    By ElectraTherm

  • Case study - Heat-to-power application using a Dreyer & Bosse CHP power unit with an internal combustion engine

    Location: Trechwitz, Germany Site Gross Power Output Range 500kWe + 30-35kWe from ElectraTherm ORC Thermal Heat Input Range:  375-450kWt Hot Water Input Range:  90-95°C (118-203°F) Hot Water Flow Range:  39 m3/hour (172 GPM) Ambient Temperature: 0-15°C (32-59°F) Date Commissioned: Q2 2012 ElectraTherm installed a Green Machine in Germany at a ...


    By ElectraTherm

  • Case study - Green Machine uses biomass to put power back on the grid

    St. Helena Island, South Carolina Gross Power Output: up to 43kWe Thermal Heat Input: 200 - 500kWt Hot Water Input Range: 160 - 235°F Hot Water Flow: 150 GPM     Cold Water Input: 68°F Cold Water Flow: 150 GPM In fall 2010, American Capital Resources Company installed ElectraTherm’s heat-to-power Green Machine, for generating power from ...


    By ElectraTherm

  • Case study - Green Machine generates power from waste heat at biogas facility in the Czech Republic

    Biogas/Heat-to-Power Application on Two MWM Internal Combustion Engines Site: Brno, Czech Rep. Engine Max Power: 980kWe (currently limited to 900 kWe) Green Machine Gross Power Output Avg:  32-39 kWe Thermal Input to the Green Machine: 375-500kWt Hot Water Input Range: 86 - 92°C Hot Water Flow: 35 m3/hour Ambient Temperature: 0-25°C Date Commissioned: Q2 ...


    By ElectraTherm

  • Green machine generates power from waste heat at biogas facility in the Czech Republic

    Biogas/Heat-to-Power Application on Two MWM Internal Combustion Engines Site: Brno, Czech Rep. Engine Max Power: 980kWe (currently limited to 900 kWe) Green Machine Gross Power Output Avg:  32-39 kWe Thermal Input to the Green Machine: 375-500kWt Hot Water Input Range: 86 - 92°C Hot Water Flow: 35 m3/hour Ambient Temperature: 0-25°C ElectraTherm’s ...


    By ElectraTherm

  • Case study - ElectraTherm commissions 10 green machines on district heating system in Europe

    ElectraTherm commissioned 10 Green Machine 4400s in Levice, Slovakia in June 2014. ElectraTherm’s Czech distributor, GB Consulting, facilitated the deployment of Organic Rankine Cycle (ORC) systems on a centralized district heating system in Slovakia as a means of increasing on-site efficiency and generating clean energy. ElectraTherm’s Green Machine generates fuel-free, ...


    By ElectraTherm

  • Renewable resource Trechwitz ORC - Case Study

    This plant has an electrical output of 800 kW and a thermal power of 760 KW. At the biogas plant in Trechwitz, an unconventional heat utilisation model was installed. The waste heat from the CHP unit is used to generate power in an ORC unit (Organic Rankine Cycle). The heat goes into an evaporator, and the operating liquid is converted into pressurised steam. The steam is depressurised by ...

  • Challenges of Fuel Gas Purification for Cogeneration Under Stringent Regulatory Requirements

    ABSRTRACTInland Empire Utilities Agency (IEUA), a municipal water district based in Chino, CA is currently executing a cogeneration power project, titled Renewable Energy Efficiency Project (REEP) at the Regional Plant No.5 (RP-5), which showcases a variety of innovative technologies for the power production. The project involved many innovative technologies, most of which are still in the ...

  • Case study - Solar thermal In Louisiana

    Solar Thermal/ORC Application in the USA Site Location: Crowley, LA, United States Thermal Power Available: Up to 650 kWt Green Machine Gross Power Output Avg: 15-50 kWe Hot Water Input Range: 65-120°C Water Cooling Tower: Up to 600 kWt ElectraTherm partnered with its gulf coast distributor, Gulf Coast Green Energy, to commission a Green Machine for a project sponsored by ...


    By ElectraTherm

  • Case study - ElectraTherm partners with GB Consulting and EnviTec Biogas on first of its kind biogas application

    Biogas/ORC Application on GE Jenbacher 412 Engine Site: Straznice, Czech Rep. Engine Power: 844kWe Green Machine Gross Power Output Avg: 30-40 kWe Thermal Input to the Green Machine: ~500kW Hot Water Input Range: 94°C Hot Water Flow: 12 l/s Liquid Loop Radiator Water Temperature: -7 to 40°C In the Czech Republic, ElectraTherm, distributor GB Consulting and ...


    By ElectraTherm

  • Case study - ElectraTherm green machines generate electricity from wood waste at mill in Oregon

    ElectraTherm commissioned its second Green Machine at an integrated wood products mill in Wallowa, Oregon. Together, the two machines operate off the waste heat of a biomass boiler to generate emission-free electricity. Integrated Biomass Resources (IBR) processes small-diameter timber into various wood products, such as firewood and fence posts. Wallowa Resources Community Solutions, Inc. ...


    By ElectraTherm

  • Case Study: Municipal Sustainability

    PHGE Brings Renewable Energy, Diverts Wood & Sludge from Landfill Progressive civic leaders in Covington, TN, knew there was a better solution to disposing of wood waste and sludge than hauling thousands of tons to a landfill every year and paying tipping fees. PHG Energy designed and installed the company’s first municipal gasification system at the city’s waste water ...


  • Case Study: New Tennessee Waste-To-Energy Plant

    Clean Conversion Infrastructure Addition To Give Lebanon Renewable Energy PHG Energy will provide the vibrant and growing Middle Tennessee city of Lebanon with a new method of sustainable waste disposal and renewable energy production when this system is completed in 2016. Commercial wood waste that was previously dumped into in area landfills, hundreds of tons of scrap tires, and ...


  • Radiator with a Payback Commissioned in Nevada - Case Study

    ElectraTherm Commissions First Radiator with a PaybackORC Technology Replaces Engine’s Radiator, Offsets Radiator Capital Cost and Generates Electricity ORC Application on a Cummins KTA-50 Site: Reno, NV ElectraTherm partnered with the U.S. Department of Defense (DoD) to commission the first fully-integrated ...


    By ElectraTherm

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you