overband magnetic separator Articles

  • Overbands supplied to SB Waste

    Master Magnets Ltd has recently supplied a permanent and an electro Overband Magnet to a major waste recycling company in Wolverhampton known as SB Waste Management & Recycling Ltd. SB Waste Management & Recycling Limited is one of a largest independent skip hire and recycling companies and was established in 1984. They have vast experience in the recycling industry collecting construction and ...


    By Master Magnets Ltd

  • Vulcanis Maximise Steel Can Recovery with a Bunting Cross Belt Overband Magnet

    Vulcanis has designed and built a new recycling plant to receive and recover steel and aluminium cans in Barking, UK, and purchased a Cross Belt Overband Magnet for steel can recovery from Bunting Magnetics Europe Ltd. Presently, consumers in the UK use approximately 13 billion steel cans and 50 billion aluminium cans per annum and recycling rates are 61% for steel (Tata 2014) and 57% ...


    By Bunting Magnetics Co.

  • Interserve Waste Recycling Facility - Case Study

    EMS is proud to work with Interserve, one of the world’s foremost support service and construction companies. They are listed in the FTSE 250 index with gross revenue of £2.3 billion and a workforce of over 50,000 people worldwide. They asked EMS to help them make a large transition at a new-build site. They wanted their operation to move from manual sorting to a modern, ...

  • Lowmac Alloys Recycling Services - Case Study

    Alloys offer a broad range of recycling services, to companies all over the west of Scotland, from their two main bases at Irvine and Ayr. The company needed a two-phase upgrade of their existing facility to handle an increasing and diverse workload, which included metal recovery, fines extraction, wood, hardcore, hard plastics, ferrous and non-ferrous materials among others. This demanded a ...

  • Lowmac Alloys upgrades Recycling Services - Case Study

    Lowmac Alloys offer a broad range of recycling services, to companies all over the west of Scotland, from their two main bases at Irvine and Ayr. The company needed a two-phase upgrade of their existing facility to handle an increasing and diverse workload, which included metal recovery, fines extraction, wood, hardcore, hard plastics, ferrous and non-ferrous materials among others. This ...

  • Case study - D&E Robbert at Leatherhead (Surrey), United Kingdom

    Waste Separation System including: 1 Belt Separation System  10 mtr long 1200 mm width flat belt 1 Feed Conveyor to Trommel Screen 4 mtr long 1200 mm width flat belt 1 Trommel Screen 263 ; -30 / +30 1 Link conveyor to picking station 11 mtr long 1200 mm width Chevron belt 1 Permanent overband magnet 1 Picking ...

  • Case study - DTS Environmental LTD at Barnsley (Carlton), United Kingdom

    Waste Separation System including; 1 Vibratory feeder system 12 Conveyor belts 1 Trommel screen 384 ; -50 / +50 3 Permanent overband magnets 1 Picking station - 4 Bay 1 Air separation system 1 Screening station ; 0/ -20 ; +20 /50 Waste separator ; Type 400-2 Air retractiion system 1 ...

  • Case study - Ballast Phoenix at Tilbury, United Kingdom

    ASH Separation System including; 1 Chrizzy feeder 2 Conveyor belts 400 width 3 Conveyor belts 650 width 6 Conveyor belts 800 width 5 Conveyor belts 1000 width 3 Conveyor belts 1400 width 1 Screen Mogensen screen 1 Trommel 4/2000 2 Eddy current systems with vibratory feeder 2 Air separation ...

  • Barr Environmental Waste Management Company - Case Study

    Barr Environmental is a waste management company providing collection, transport, recycling and disposal services to the public and private sectors in the south-west of Scotland and Northern Ireland. Before teaming up with EMS, all of Barr’s output was heading to landfill. They asked us to deliver a system capable of diverting a large proportion of that to help them lower costs, lower ...

  • The Carey Group adds Multi-Functional Waste System to its Business - Case Study

    EMS were delighted to be asked to work with the Carey Group, a leading independently-owned construction company operating across the UK and Ireland. The Carey Group is unique within the construction industry due to their internal specialist demolition, civil engineering, concrete structures, building and environmental business units. Being involved in so many areas, they needed a comprehensive ...

  • O’Brien Waste Recycling Solutions - Case Study

    O-BrienEMS are proud to have contributed to O’Brien Waste Recycling Solutions being one the UK’s fastest-growing waste management, recycling and data destruction (shredding) providers. They were recently listed in the Sunday Times as one of the top 100 performing private companies in the UK and picked up a number of national and international awards. They came to EMS with the ...

  • Case study - Saubermacher – Austria - Processing plant for waste electrical and electronic equipment (WEEE)

    Customer Founded in the 1979 as a small family- owned company, Saubermacher has developed into a group with around 3,800 employees and 75 locations with holdings in Austria, Slovenia, Hungary, the Czech Republic and Romania. On 10th November 2010, the ecycling- park in Unterpremstätten was taken into operation, as the first electro-waste processing plant in the ...

  • Double the amount and resale price of the reusable steel with TANA Shark 440DT - Case Study

    Our customer from southern Europe uses tyre shreds as an alternative heat source instead of coal and oil in a process of making cement out of chalk stone. Formerly they used electric, stationary shredder without an over-band magnet. After changing the machinery to TANA Shark 440DT, the diesel-driven mobile waste shredder on tracks, the customer has been very satisfied on both the improvements in ...


    By Tana Oy

  • TDA is the future solution to lightweight foundations

    Our customers often ask us how to turn shredded tyres into business. This series of articles enlightens the future possibilities of utilizing end-of-life tyres (ELTs) and also presents productive and environmental friendly applications that are already commercialized. Picture: 50x50mm tyre shreds work best as ...


    By Tana Oy

  • Eldan Recycling introduces a system for processing of mining tyres

    The Eldan Recycling mining tyre recycling system can turn the huge waste mining tyres into reusable rubber granulate, powder and clean steel wire… Eldan Recycling delivered and installed its first complete tyre recycling plant back in 1991 and has since then developed and optimised the process to obtain the best possible purity of the rubber granulate. Over 200 complete systems and ...


    By Eldan Recycling A/S

  • Case study - Saubermacher Dienstleistungs AG –Austria - Plastic sorting plant for light packaging waste

    Customer SAUBERMACHER DIENSTLEISTUNGS AG is the leader of the Austrian recycling and waste collection market. The company, founded in 1979 by the family Roth, is now listed on the stock market and has 3,900 employees. SAUBERMACHER is collecting and recycling from approximately 1,600 communities in Central Europe and collaborates with over 40,000 commercial and ...

  • Turn landfilling cost of ragger wire to profit with TANA Shark - Case Study

    Recycling cardboard for use as new packaging material saves costs for the manufacturer. Unfortunately, landfilling the ragger wire that comes as a byproduct of the recycling process is costly. With the help of TANA Shark, this added cost can be turned into profit by separating the metal and selling it to be used again. Ragger wire or pulper tail is the residue of steel wires and plastic that ...


    By Tana Oy

  • Less fines improves productivity in waste wood shredding - Case Study

    A customer in France was shredding waste wood with two Doppstadts. After processing the wood twice, up to 20% of the total outcome was worthless fine wood dust. With TANA Shark the problem with the dust was eliminated and productivity of the process was improved respectively. Steady burning process in a heating unit requires pure wood particles ...


    By Tana Oy

  • Puzzled by problematic waste such as tires, mattresses or ragger wire?

    From left to right: Shredded ragger wire, end-of-life tires, mattresses As waste management professionals, we are constantly facing the challenge of how to process problematic waste types. Tana Oy has a cost-efficient solution to offer for turning such waste streams into value. Shredding materials both minimizes ...


    By Tana Oy

  • Key things to know about what TANA can do for your business

    (Pictured) New TANA Shark 440EM electric shredder offers unique versatility with zero emissions. Our customers operate in countless different areas of the waste management industry. They treat a wide range of waste types and streams using a variety of processes. Our job is to help them do that as ...


    By Tana Oy

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you