overflow weir Articles

  • Experimental investigation on the efficiency of a high side weir overflow

    ABSTRACTMost of the overflow structures in Flanders are 'high side weir overflows'. For the design of these structures British guidelines are used. However, the design conditions for sewer systems in the U.K. differ from the Flemish design conditions. In Flanders, pressurised flow is in common use in the pipes of the sewer system. That is why tests have been carried out on a scale model of a ...


    By IWA Publishing

  • Simulation of overflow nappe impingement jets

    Rectangular jets constitute one of the energy dissipation methods in the overtopping of dams. The high turbulence and aeration phenomena that appear in falling jets and dissipation basins make it difficult to carry out studies based only on classical methodologies. There are studies modelling spillways with computational fluid dynamics which produces accurate results. However, the study of ...


    By IWA Publishing

  • Mononov specified for europe’s largest storm overflow

    Through its Spanish distributor, Albosa, Mono has supplied 32 stormscreens and 46 progressing cavity pumps to the UMAC Wastewater Treatment plant, which was designed to handle a maximum flow of 129,600m3 per day. These high performance stormscreens, which offer an alternative to conventional mesh and powered screens for handling storm overflows, have been installed to ensure that no contaminated ...

  • Sensitivity analysis on the pollutant trapping efficiencies of a novel sewerage overflow screening device

    A novel ‘Comb Separator’ was developed and tested with the aim of improving sewer solids capture efficiency and reducing blockages on the screen. Experimental results were compared against the industry standard ‘Hydro-Jet™’ screen. Analysing the parameter sensitivity of a hydraulic screen is a standard practice to get better understanding of the device performance. In order to understand the ...


    By IWA Publishing

  • Development of a discharge equation for side weirs using artificial neural networks

    ABSTRACT Flow over a side weir is one of the more complex flows to simulate in one-dimensional unsteady flow analysis. Various experiments have been applied, but no agreement is apparent in the literature about the best method. In this study, an Artificial Neural Network model has been used to extract a discharge equation for side weirs which accurately estimates overflow discharges. The ...


    By IWA Publishing

  • Optimise inlet condition and design parameters of a new sewer overflow screening device using numerical model

    After heavy rainfall, sewer overflow spills to receiving water bodies cause serious concern for the environment, aesthetics and public health. To overcome these problems this study investigated a new self-cleansing sewer overflow screening device. The device has a sewer overflow chamber, a rectangular tank and a slotted ogee weir to capture the gross pollutants. To design an efficient screening ...


    By IWA Publishing

  • DLT 2.0 differential level transmitter open letter from a Greyline customer

    The Process: The Municipality of the District of Lunenburg in Whynott's Settlement, Nova Scotia added a septage receiving station to their landfill site. Part of the treatment train is a chlorinated duplex vertical turbine pump station delivering effluent from the sludge processing facility to a field of spray nozzles for dispersion. The pump station has two points of discharge and the ...


    By Greyline Instruments Inc.

  • Mononov provides stormscreen solution to sewage problem

    The installation of a Mono Stormscreen unit now allows the incoming raw sewage to be thoroughly screened at storm level, ensuring large solids are retained in the main flow to treatment and that the stormwater discharge from inlet meets consent requirements. The Stormscreen is designed to provide a self-cleaning, self-powered alternative to existing mesh screens for handling storm overflows. ...

  • Monroe Parallel Plate Modules increase oils and solids removal in existing API Separator

    Challenge A silicone manufacturing plant was increasing capacity production and needed to increase the processing of the accompanying wastewater stream containing tramp oils and solids. If possible, the plant wanted to increase the efficiency and capacity of two existing 140,000-gallon API Separators to handle the additional wastewater. The plant required that the water be clean enough to ...

  • Modeling of Sedimentation in Stormwater Detention Basins

    ABSTRACTTo minimize the non-point source pollution from roadway surface, the Texas Department of Transportation (TxDOT) initiated a research project for design of a small footprint non-proprietary detention basin, which consists of pipes and box culvert sections with specialized inlet and outlet system. A conceptual model was developed to estimate particle removal efficiency of the rectangular ...

  • Mononov provides stormscreen protection for lake district beauty spot

    The station’s existing screens had previously caused system blockages that posed a threat of subsequent flooding. Looking to install an extra level of screening into the system, United Utilities were impressed by the flow-powered operation and the selfcleaning action offered by the SC1A15064 Mono Stormscreens. “The Bowness CSO overflow chamber is located under a main road and accessed via a ...

  • 10 Years Experience of CSO Management in the United Kingdom

    ABSTRACTThe United Kingdom’s ageing sewerage infrastructure meant that by the late 20th century the country was facing a major environmental problem associated with storm sewage discharges from more than 8,000 unsatisfactory combined sewer overflows (CSOs). Addressing this problem presented a major challenge to the UK water industry, but it is a challenge that has been met by a combination of ...

  • ROMAG storm water screen system for the CSO works La Maladière in Neuenburg

    With the RSW-K high-capacity storm water screen and a emergency shut-off valve, the volume of the upstream sewerage system is optimally utilized and the receiving body ideally protected against contamination. The storm water screen removes visible solids from the sewage water before the water is discharged into the receiving body. At the La Maladière surplusing works, the ROMAG RSW-K ...


    By ROMAG aquacare ag

  • Implementation of CFD modeling in the performance assessment and optimization of secondary clarifiers: the PVSC case study

    The water industry and especially the wastewater treatment sector has come under steadily increasing pressure to optimize their existing and new facilities to meet their discharge limits and reduce overall cost. Gravity separation of solids, producing clarified overflow and thickened solids underflow has long been one of the principal separation processes used in treating secondary effluent. ...


    By IWA Publishing

  • Assessing the efficiency of different CSO positions based on network graph characteristics

    The technical design of urban drainage systems comprises two major aspects: first, the spatial layout of the sewer system and second, the pipe-sizing process. Usually, engineers determine the spatial layout of the sewer network manually, taking into account physical features and future planning scenarios. Before the pipe-sizing process starts, it is important to determine locations of possible ...


    By IWA Publishing

  • Oil Skimmer makes oil/water separator more efficient

    Industrial facilities depend on oil/water separators to separate oil from its waste water. While oil/water separators are a helpful component to a plant's wastewater system, oil/water separators traditionally do not provide an efficient method of removing oil once it has been separated from the waste stream. Traditionally, the separator industry has either used overflow skimmer pipes or weirs, or ...


    By Oil Skimmers, Inc.

  • Modeling storage capacity in Amsterdam’s sewer system

    About Waternet Waternet is a joint executive within the Amsterdam City Council and the regional management board Amstel, Gooi en Vecht, undertaking strategy, policy, design, planning, projects and administration for wastewater, groundwater and potable water. The organization controls 12 wastewater treatment plants, 3,500km of stormwater and wastewater pipelines, 500km of pressure pipes, ...


    By Innovyze

  • Cleaner Production Changes - Plenty to Crow About: Joe`s Poultry Processors

    By implementing a number of simple measures recommended by consultants, Joe’s Poultry has been able to save $54,000 with an overall payback period of less than 4 months. Through these measures, electricity and gas consumption has been reduced by 16 and 15 percent respectively. Water consumption has been cut by 8.8kL per day. Other measures, if implemented, could produce savings of almost $1 ...


  • Side By Side By Side: The Evaluation of Three High Rate Process Technologies for Wet Weather Treatment

    ABSTRACTMost large combined sewer communities face significant financial investment to address wet weather compliance issues. Innovative, cost-effective methods of dealing with wet weather flows is a must to prevent spiraling rate increases for rate payers. High rate clarification and high rate filtration systems are becoming the technology of choice for treating wet weather flows. The City of ...

  • Continuous blender increases production, diminishes heat buildup

    CJB Industries, Valdosta, Ga., custom-formulates, processes, and packages chemicals and provides research, development, and engineering services. CJB's newest production line is for a high-loading solid that combines 50 percent liquid acid with 50 percent dry clay product, resulting in an 8- to 16-mesh dry corrosive granular material that resembles kitty litter. The customer for this material ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you